Carbonic oxide gas Carbon protoxide Oxide of carbon Protoxide of carbon Carbonous oxide Carbonous acid gas Carbon(II) oxide Breath of carbon Oxygenated carbon Carbate Carbonyl Water gas Hydrocarbon gas Fuel gas Rauchgas Carbonic inflammable air Heavy inflammable air White damp Fire Damp Powder Gas Illuminating gas Dowson gas Mond gas Power gas Producer gas Blast furnace gas Coal gas Phlogiston Car gas
Carbon monoxide (chemical formulaCO) is a poisonous, flammable gas that is colorless, odorless, tasteless, and slightly less dense than air. Carbon monoxide consists of one carbon atom and one oxygen atom connected by a triple bond. It is the simplest carbon oxide. In coordination complexes, the carbon monoxide ligand is called carbonyl. It is a key ingredient in many processes in industrial chemistry.[5]
The most common source of carbon monoxide is the partial combustion of carbon-containing compounds. Numerous environmental and biological sources generate carbon monoxide. In industry, carbon monoxide is important in the production of many compounds, including drugs, fragrances, and fuels.[6] Upon emission into the atmosphere, carbon monoxide affects several processes that contribute to climate change.[7]
Indoors CO is one of the most acutely toxic contaminants affecting indoor air quality. CO may be emitted from tobacco smoke and generated from malfunctioning fuel burning stoves (wood, kerosene, natural gas, propane) and fuel burning heating systems (wood, oil, natural gas) and from blocked flues connected to these appliances.[8]Carbon monoxide poisoning is the most common type of fatal air poisoning in many countries.[9][8][10]
Carbon monoxide has important biological roles across phylogenetic kingdoms. It is produced by many organisms, including humans. In mammalian physiology, carbon monoxide is a classical example of hormesis where low concentrations serve as an endogenous neurotransmitter (gasotransmitter) and high concentrations are toxic resulting in carbon monoxide poisoning. It is isoelectronic with both cyanide anion CN− and molecular nitrogen N2.
The carbon and oxygen are connected by a triple bond that consists of a net two pi bonds and one sigma bond. The bond length between the carbon atom and the oxygen atom is 112.8 pm.[11][12] This bond length is consistent with a triple bond, as in molecular nitrogen (N2), which has a similar bond length (109.76 pm) and nearly the same molecular mass. Carbon–oxygen double bonds are significantly longer, 120.8 pm in formaldehyde, for example.[13] The boiling point (82 K) and melting point (68 K) are very similar to those of N2 (77 K and 63 K, respectively). The bond-dissociation energy of 1072 kJ/mol is stronger than that of N2 (942 kJ/mol) and represents the strongest chemical bond known.[14]
The strength of the C-O bond in carbon monoxide is indicated by the high frequency of its vibration, 2143 cm-1.[18] For comparison, organic carbonyls such as ketones and esters absorb at around 1700 cm-1.
Carbon and oxygen together have a total of 10 electrons in the valence shell. Following the octet rule for both carbon and oxygen, the two atoms form a triple bond, with six shared electrons in three bonding molecular orbitals, rather than the usual double bond found in organic carbonyl compounds. Since four of the shared electrons come from the oxygen atom and only two from carbon, one bonding orbital is occupied by two electrons from oxygen, forming a dative or dipolar bond. This causes a C←O polarization of the molecule, with a small negative charge on carbon and a small positive charge on oxygen. The other two bonding orbitals are each occupied by one electron from carbon and one from oxygen, forming (polar) covalent bonds with a reverse C→O polarization since oxygen is more electronegative than carbon. In the free carbon monoxide molecule, a net negative charge δ– remains at the carbon end and the molecule has a small dipole moment of 0.122 D.[19]
The molecule is therefore asymmetric: oxygen is more electron dense than carbon and is also slightly positively charged compared to carbon being negative.
Carbon monoxide has a computed fractional bond order of 2.6, indicating that the "third" bond is important but constitutes somewhat less than a full bond.[20] Thus, in valence bond terms, –C≡O+ is the most important structure, while :C=O is non-octet, but has a neutral formal charge on each atom and represents the second most important resonance contributor. Because of the lone pair and divalence of carbon in this resonance structure, carbon monoxide is often considered to be an extraordinarily stabilized carbene.[21]Isocyanides are compounds in which the O is replaced by an NR (R = alkyl or aryl) group and have a similar bonding scheme.
If carbon monoxide acts as a ligand, the polarity of the dipole may reverse with a net negative charge on the oxygen end, depending on the structure of the coordination complex.[22]
See also the section "Coordination chemistry" below.
Bond polarity and oxidation state
Theoretical and experimental studies show that, despite the greater electronegativity of oxygen, the dipole moment points from the more-negative carbon end to the more-positive oxygen end.[23][24] The three bonds are in fact polar covalent bonds that are strongly polarized. The calculated polarization toward the oxygen atom is 71% for the σ-bond and 77% for both π-bonds.[25]
The oxidation state of carbon in carbon monoxide is +2 in each of these structures. It is calculated by counting all the bonding electrons as belonging to the more electronegative oxygen. Only the two non-bonding electrons on carbon are assigned to carbon. In this count, carbon then has only two valence electrons in the molecule compared to four in the free atom.
Occurrence
Carbon monoxide occurs in various natural and artificial environments. Photochemical degradation of plant matter for example generates an estimated 60 million tons/year.[27] Typical concentrations in parts per million are as follows:
Carbon monoxide (CO) is present in small amounts (about 80 ppb) in the Earth's atmosphere. Most of the rest comes from chemical reactions with organic compounds emitted by human activities and natural origins due to photochemical reactions in the troposphere that generate about 5 × 1012 kilograms per year.[35] Other natural sources of CO include volcanoes, forest and bushfires, and other miscellaneous forms of combustion such as fossil fuels.[36] Small amounts are also emitted from the ocean, and from geological activity because carbon monoxide occurs dissolved in molten volcanic rock at high pressures in the Earth's mantle.[37] Because natural sources of carbon monoxide vary from year to year, it is difficult to accurately measure natural emissions of the gas.
Carbon monoxide has an indirect effect on radiative forcing by elevating concentrations of direct greenhouse gases, including methane and troposphericozone. CO can react chemically with other atmospheric constituents (primarily the hydroxylradical, •OH) that would otherwise destroy methane.[38] Through natural processes in the atmosphere, it is oxidized to carbon dioxide and ozone. Carbon monoxide is short-lived in the atmosphere (with an average lifetime of about one to two months), and spatially variable in concentration.[39]
Due to its long lifetime in the mid-troposphere, carbon monoxide is also used as a tracer for pollutant plumes.[40]
Astronomy
Beyond Earth, carbon monoxide is the second-most common diatomic molecule in the interstellar medium, after molecular hydrogen. Because of its asymmetry, this polar molecule produces far brighter spectral lines than the hydrogen molecule, making CO much easier to detect. Interstellar CO was first detected with radio telescopes in 1970. It is now the most commonly used tracer of molecular gas in general in the interstellar medium of galaxies, as molecular hydrogen can only be detected using ultraviolet light, which requires space telescopes. Carbon monoxide observations provide much of the information about the molecular clouds in which most stars form.[41][42]
Beta Pictoris, the second brightest star in the constellation Pictor, shows an excess of infrared emission compared to normal stars of its type, which is caused by large quantities of dust and gas (including carbon monoxide)[43][44] near the star.
In the atmosphere of Venus carbon monoxide occurs as a result of the photodissociation of carbon dioxide by electromagnetic radiation of wavelengths shorter than 169 nm. It has also been identified spectroscopically on the surface of Neptune's moon Triton.[45]
Solid carbon monoxide is a component of comets.[46] The volatile or "ice" component of Halley's Comet is about 15% CO.[47] At room temperature and at atmospheric pressure, carbon monoxide is actually only metastable (see Boudouard reaction) and the same is true at low temperatures where CO and CO 2 are solid, but nevertheless it can exist for billions of years in comets. There is very little CO in the atmosphere of Pluto, which seems to have been formed from comets. This may be because there is (or was) liquid water inside Pluto.
Carbon monoxide can react with water to form carbon dioxide and hydrogen:
CO + H2O → H 2 + CO 2
This is called the water-gas shift reaction when occurring in the gas phase, but it can also take place (very slowly) in an aqueous solution.
If the hydrogen partial pressure is high enough (for instance in an underground sea), formic acid will be formed:
CO + H2O → HCOOH
These reactions can take place in a few million years even at temperatures such as found on Pluto.[48]
Pollution and health effects
Urban pollution
Carbon monoxide is a temporary atmospheric pollutant in some urban areas, chiefly from the exhaust of internal combustion engines (including vehicles, portable and back-up generators, lawnmowers, power washers, etc.), but also from incomplete combustion of various other fuels (including wood, coal, charcoal, oil, paraffin, propane, natural gas, and trash).
Large CO pollution events can be observed from space over cities.[49]
Carbon monoxide is, along with aldehydes, part of the series of cycles of chemical reactions that form photochemical smog. It reacts with hydroxyl radical (•OH) to produce a radical intermediate •HOCO, which rapidly transfers its radical hydrogen to O2 to form peroxy radical (HO2•) and carbon dioxide (CO2).[50] Peroxy radical subsequently reacts with nitrogen oxide (NO) to form nitrogen dioxide (NO2) and hydroxyl radical. NO2 gives O(3P) via photolysis, thereby forming O3 following reaction with O2.
Since hydroxyl radical is formed during the formation of NO2, the balance of the sequence of chemical reactions starting with carbon monoxide and leading to the formation of ozone is:
CO + 2O2 + hν → CO2 + O3
(where hν refers to the photon of light absorbed by the NO2 molecule in the sequence)
Although the creation of NO2 is the critical step leading to low level ozone formation, it also increases this ozone in another, somewhat mutually exclusive way, by reducing the quantity of NO that is available to react with ozone.[51]
Carbon monoxide is one of the most acutely toxic indoor air contaminants. Carbon monoxide may be emitted from tobacco smoke and generated from malfunctioning fuel burning stoves (wood, kerosene, natural gas, propane) and fuel burning heating systems (wood, oil, natural gas) and from blocked flues connected to these appliances.[8] In developed countries the main sources of indoor CO emission come from cooking and heating devices that burn fossil fuels and are faulty, incorrectly installed or poorly maintained.[52] Appliance malfunction may be due to faulty installation or lack of maintenance and proper use.[8] In low- and middle-income countries the most common sources of CO in homes are burning biomass fuels and cigarette smoke.[52]
Mining
Miners refer to carbon monoxide as "whitedamp" or the "silent killer". It can be found in confined areas of poor ventilation in both surface mines and underground mines. The most common sources of carbon monoxide in mining operations are the internal combustion engine and explosives; however, in coal mines, carbon monoxide can also be found due to the low-temperature oxidation of coal.[53] The idiom "Canary in the coal mine" pertained to an early warning of a carbon monoxide presence.[54]
Carbon monoxide poisoning is the most common type of fatal air poisoning in many countries. Acute exposure can also lead to long-term neurological effects such as cognitive and behavioural changes. Severe CO poisoning may lead to unconsciousness, coma and death. Chronic exposure to low concentrations of carbon monoxide may lead to lethargy, headaches, nausea, flu-like symptoms and neuropsychological and cardiovascular issues.[9][8][10]
Chemistry
Carbon monoxide has a wide range of functions across all disciplines of chemistry. The four premier categories of reactivity involve metal-carbonyl catalysis, radical chemistry, cation and anion chemistries.[55]
Most metals form coordination complexes containing covalently attached carbon monoxide. These derivatives, which are called metal carbonyls, tend to be more robust when the metal is in lower oxidation states. For example iron pentacarbonyl (Fe(CO)5) is an air-stable, distillable liquid. Nickel carbonyl is an example of a metal carbonyl complex that forms by the direct combination of carbon monoxide with the metal:C. Elschenbroich (2006). Organometallics. VCH. ISBN978-3-527-29390-2.
As a ligand, CO binds through carbon, forming a kind of triple bond. The lone pair on the carbon atom donates electron density to form a M-CO sigma bond. The two π* orbitals on CO bind to filled metal orbitals. The effect is related to the Dewar-Chatt-Duncanson model. The effects of the quasi-triple M-C bond is reflected in the infrared spectrum of these complexes. Whereas free CO vibrates at 2143 cm-1, its complexes tend to absorb near 1950 cm-1.
The compounds cyclohexanehexone or triquinoyl (C6O6) and cyclopentanepentone or leuconic acid (C5O5), which so far have been obtained only in trace amounts, can be regarded as polymers of carbon monoxide. At pressures exceeding 5 GPa, carbon monoxide converts to polycarbonyl, a solid polymer that is metastable at atmospheric pressure but is explosive.[61][62]
Finally, metal oxalate salts release CO upon heating, leaving a carbonate as byproduct:
Na 2C 2O 4 → Na 2CO 3 + CO
Production
Thermal combustion is the most common source for carbon monoxide. Carbon monoxide is produced from the partial oxidation of carbon-containing compounds; it forms when there is not enough oxygen to produce carbon dioxide (CO2), such as when operating a stove or an internal combustion engine in an enclosed space.
A large quantity of CO byproduct is formed during the oxidative processes for the production of chemicals. For this reason, the process off-gases have to be purified.
Many methods have been developed for carbon monoxide production.[64]
Industrial production
A major industrial source of CO is producer gas, a mixture containing mostly carbon monoxide and nitrogen, formed by combustion of carbon in air at high temperature when there is an excess of carbon. In an oven, air is passed through a bed of coke. The initially produced CO2 equilibrates with the remaining hot carbon to give CO.[65] The reaction of CO2 with carbon to give CO is described as the Boudouard reaction.[66] Above 800 °C, CO is the predominant product:
CO2 (g) + C (s) → 2 CO (g) (ΔHr = 170 kJ/mol)
Another source is "water gas", a mixture of hydrogen and carbon monoxide produced via the endothermic reaction of steam and carbon:
H2O (g) + C (s) → H2 (g) + CO (g) (ΔHr = 131 kJ/mol)
Carbon monoxide is also a byproduct of the reduction of metal oxideores with carbon, shown in a simplified form as follows:
MO + C → M + CO
Carbon monoxide is also produced by the direct oxidation of carbon in a limited supply of oxygen or air.
2 C + O2 → 2 CO
Since CO is a gas, the reduction process can be driven by heating, exploiting the positive (favorable) entropy of reaction. The Ellingham diagram shows that CO formation is favored over CO2 in high temperatures.
Phosgene, useful for preparing isocyanates, polycarbonates, and polyurethanes, is produced by passing purified carbon monoxide and chlorine gas through a bed of porous activated carbon, which serves as a catalyst. World production of this compound was estimated to be 2.74 million tonnes in 1989.[71]
CO + Cl2 → COCl2
Methanol is produced by the hydrogenation of carbon monoxide. In a related reaction, the hydrogenation of carbon monoxide is coupled to C−C bond formation, as in the Fischer–Tropsch process where carbon monoxide is hydrogenated to liquid hydrocarbon fuels. This technology allows coal or biomass to be converted to diesel.
In the Cativa process, carbon monoxide and methanol react in the presence of a homogeneous iridiumcatalyst and hydroiodic acid to give acetic acid. This process is responsible for most of the industrial production of acetic acid.
Carbon monoxide is a strong reductive agent and has been used in pyrometallurgy to reduce metals from ores since ancient times. Carbon monoxide strips oxygen off metal oxides, reducing them to pure metal in high temperatures, forming carbon dioxide in the process. Carbon monoxide is not usually supplied as is, in the gaseous phase, in the reactor, but rather it is formed in high temperature in presence of oxygen-carrying ore, or a carboniferous agent such as coke, and high temperature. The blast furnace process is a typical example of a process of reduction of metal from ore with carbon monoxide.
Likewise, blast furnace gas collected at the top of blast furnace, still contains some 10% to 30% of carbon monoxide, and is used as fuel on Cowper stoves and on Siemens-Martin furnaces on open hearth steelmaking.
Proposed use as a rocket fuel
Carbon monoxide has been proposed for use as a fuel on Mars by NASA researcher Geoffrey Landis. Carbon monoxide/oxygen engines have been suggested for early surface transportation use as both carbon monoxide and oxygen can be straightforwardly produced from the carbon dioxide atmosphere of Mars by zirconiaelectrolysis, without using any Martian water resources to obtain hydrogen, which would be needed to make methane or any hydrogen-based fuel.[72]
Landis also proposed manufacturing the fuel from the similar carbon dioxide atmosphere of Venus for a sample return mission, in combination with solar-powered UAVs and rocket balloon ascent.[73]
Carbon monoxide is a bioactive molecule which acts as a gaseous signaling molecule. It is naturally produced by many enzymatic and non-enzymatic pathways,[74] the best understood of which is the catabolic action of heme oxygenase on the heme derived from hemoproteins such as hemoglobin.[75] Following the first report that carbon monoxide is a normal neurotransmitter in 1993,[54] carbon monoxide has received significant clinical attention as a biological regulator.
Because of carbon monoxide's role in the body, abnormalities in its metabolism have been linked to a variety of diseases, including neurodegenerations, hypertension, heart failure, and pathological inflammation.[76] In many tissues, carbon monoxide acts as anti-inflammatory, vasodilatory, and encouragers of neovascular growth.[77] In animal model studies, carbon monoxide reduced the severity of experimentally induced bacterial sepsis, pancreatitis, hepatic ischemia/reperfusion injury, colitis, osteoarthritis, lung injury, lung transplantation rejection, and neuropathic pain while promoting skin wound healing. Therefore, there is significant interest in the therapeutic potential of carbon monoxide becoming pharmaceutical agent and clinical standard of care.[78]
Studies involving carbon monoxide have been conducted in many laboratories throughout the world for its anti-inflammatory and cytoprotective properties.[79] These properties have the potential to be used to prevent the development of a series of pathological conditions including ischemia reperfusion injury, transplant rejection, atherosclerosis, severe sepsis, severe malaria, or autoimmunity.[78] Many pharmaceutical drug delivery initiatives have developed methods to safely administer carbon monoxide, and subsequent controlled clinical trials have evaluated the therapeutic effect of carbon monoxide.[80]
Microbiology
Microbiota may also utilize carbon monoxide as a gasotransmitter.[81] Carbon monoxide sensing is a signaling pathway facilitated by proteins such as CooA.[82][83][84] The scope of the biological roles for carbon monoxide sensing is still unknown.
The human microbiome produces, consumes, and responds to carbon monoxide.[74] For example, in certain bacteria, carbon monoxide is produced via the reduction of carbon dioxide by the enzyme carbon monoxide dehydrogenase with favorable bioenergetics to power downstream cellular operations.[85][74] In another example, carbon monoxide is a nutrient for methanogenic archaea which reduce it to methane using hydrogen.[86]
Carbon monoxide has certain antimicrobial properties which have been studied to treat against infectious diseases.[74]
Food science
Carbon monoxide is used in modified atmosphere packaging systems in the US, mainly with fresh meat products such as beef, pork, and fish to keep them looking fresh. The benefit is two-fold, carbon monoxide protects against microbial spoilage and it enhances the meat color for consumer appeal.[87] The carbon monoxide combines with myoglobin to form carboxymyoglobin, a bright-cherry-red pigment. Carboxymyoglobin is more stable than the oxygenated form of myoglobin, oxymyoglobin, which can become oxidized to the brown pigment metmyoglobin. This stable red color can persist much longer than in normally packaged meat. Typical levels of carbon monoxide used in the facilities that use this process are between 0.4% and 0.5%.[87]
The technology was first given "generally recognized as safe" (GRAS) status by the U.S. Food and Drug Administration (FDA) in 2002 for use as a secondary packaging system, and does not require labeling. In 2004, the FDA approved CO as primary packaging method, declaring that CO does not mask spoilage odor.[88] The process is currently unauthorized in many other countries, including Japan, Singapore, and the European Union.[89][90][91]
Humans have maintained a complex relationship with carbon monoxide since first learning to control fire circa 800,000 BC. Early humans probably discovered the toxicity of carbon monoxide poisoning upon introducing fire into their dwellings. The early development of metallurgy and smelting technologies emerging circa 6,000 BC through the Bronze Age likewise plagued humankind from carbon monoxide exposure. Apart from the toxicity of carbon monoxide, indigenous Native Americans may have experienced the neuroactive properties of carbon monoxide through shamanistic fireside rituals.[54]
Ancient history
Early civilizations developed mythological tales to explain the origin of fire, such as Prometheus from Greek mythology who shared fire with humans. Aristotle (384–322 BC) first recorded that burning coals produced toxic fumes. Greek physician Galen (129–199 AD) speculated that there was a change in the composition of the air that caused harm when inhaled, and many others of the era developed a basis of knowledge about carbon monoxide in the context of coal fume toxicity. Cleopatra may have died from carbon monoxide poisoning.[54]
Pre–industrial revolution
Georg Ernst Stahl mentioned carbonarii halitus in 1697 in reference to toxic vapors thought to be carbon monoxide. Friedrich Hoffmann conducted the first modern scientific investigation into carbon monoxide poisoning from coal in 1716. Herman Boerhaave conducted the first scientific experiments on the effect of carbon monoxide (coal fumes) on animals in the 1730s.[54]
Joseph Priestley is considered to have first synthesized carbon monoxide in 1772. Carl Wilhelm Scheele similarly isolated carbon monoxide from charcoal in 1773 and thought it could be the carbonic entity making fumes toxic. Torbern Bergman isolated carbon monoxide from oxalic acid in 1775. Later in 1776, the French chemist de Lassone [fr] produced CO by heating zinc oxide with coke, but mistakenly concluded that the gaseous product was hydrogen, as it burned with a blue flame. In the presence of oxygen, including atmospheric concentrations, carbon monoxide burns with a blue flame, producing carbon dioxide. Antoine Lavoisier conducted similar inconclusive experiments to Lassone in 1777. The gas was identified as a compound containing carbon and oxygen by William Cruickshank in 1800.[54][93]
Thomas Beddoes and James Watt recognized carbon monoxide (as hydrocarbonate) to brighten venous blood in 1793. Watt suggested coal fumes could act as an antidote to the oxygen in blood, and Beddoes and Watt likewise suggested hydrocarbonate has a greater affinity for animal fiber than oxygen in 1796. In 1854, Adrien Chenot similarly suggested carbon monoxide to remove the oxygen from blood and then be oxidized by the body to carbon dioxide.[54] The mechanism for carbon monoxide poisoning is widely credited to Claude Bernard whose memoirs beginning in 1846 and published in 1857 phrased, "prevents arterials blood from becoming venous". Felix Hoppe-Seyler independently published similar conclusions in the following year.[54]
Advent of industrial chemistry
Carbon monoxide gained recognition as an essential reagent in the 1900s.[5] Three industrial processes illustrate its evolution in industry. In the Fischer–Tropsch process, coal and related carbon-rich feedstocks are converted into liquid fuels via the intermediacy of CO. Originally developed as part of the German war effort to compensate for their lack of domestic petroleum, this technology continues today. Also in Germany, a mixture of CO and hydrogen was found to combine with olefins to give aldehydes. This process, called hydroformylation, is used to produce many large scale chemicals such as surfactants as well as specialty compounds that are popular fragrances and drugs. For example, CO is used in the production of vitamin A.[94] In a third major process, attributed to researchers at Monsanto, CO combines with methanol to give acetic acid. Most acetic acid is produced by the Cativa process. Hydroformylation and the acetic acid syntheses are two of myriad carbonylation processes.
^Little, L. H.; Amberg, C. H. (1962). "Infrared Spectra of Carbon Monoxide and Carbon Dioxide Adsorbed on Chromia–Alumina and on Alumina". Canadian Journal of Chemistry. 40 (10): 1997–2006. doi:10.1139/v62-306.
^Scuseria, Gustavo E.; Miller, Michael D.; Jensen, Frank; Geertsen, Jan (1991). "The dipole moment of carbon monoxide". J. Chem. Phys. 94 (10): 6660. Bibcode:1991JChPh..94.6660S. doi:10.1063/1.460293.
^Martinie, Ryan J.; Bultema, Jarred J.; Vander Wal, Mark N.; Burkhart, Brandon J.; Vander Griend, Douglas A.; DeKock, Roger L. (2011-08-01). "Bond Order and Chemical Properties of BF, CO, and N2". Journal of Chemical Education. 88 (8): 1094–1097. Bibcode:2011JChEd..88.1094M. doi:10.1021/ed100758t. ISSN0021-9584. S2CID11905354.
^Ulrich, Henri (2009). Cumulenes in click reactions. Wiley InterScience (Online service). Chichester, U.K.: Wiley. p. 45. ISBN9780470747957. OCLC476311784.
^Lupinetti, Anthony J.; Fau, Stefan; Frenking, Gernot; Strauss, Steven H. (1997). "Theoretical Analysis of the Bonding between CO and Positively Charged Atoms". J. Phys. Chem. A. 101 (49): 9551–9559. Bibcode:1997JPCA..101.9551L. doi:10.1021/jp972657l.
^Meerts, W; De Leeuw, F.H.; Dymanus, A. (1 June 1977). "Electric and magnetic properties of carbon monoxide by molecular-beam electric-resonance spectroscopy". Chemical Physics. 22 (2): 319–324. Bibcode:1977CP.....22..319M. doi:10.1016/0301-0104(77)87016-X.
^Stefan, Thorsten; Janoschek, Rudolf (2000). "How relevant are S=O and P=O Double Bonds for the Description of the Acid Molecules H2SO3, H2SO4, and H3PO3, respectively?". Journal of Molecular Modeling. 6 (2): 282–288. doi:10.1007/PL00010730. S2CID96291857.
^Source for figures: Carbon dioxide, NOAA Earth System Research Laboratory, (updated 2010.06). Methane, IPCCTAR table 6.1Archived 2007-06-15 at the Wayback Machine, (updated to 1998). The NASA total was 17 ppmv over 100%, and CO2 was increased here by 15 ppmv. To normalize, N2 should be reduced by about 25 ppmv and O2 by about 7 ppmv.
^Committee on Medical and Biological Effects of Environmental Pollutants (1977). Carbon Monoxide. Washington, D.C.: National Academy of Sciences. p. 29. ISBN978-0-309-02631-4.
^Gosink, Tom (1983-01-28). "What Do Carbon Monoxide Levels Mean?". Alaska Science Forum. Geophysical Institute, University of Alaska Fairbanks. Archived from the original on 2008-12-25. Retrieved 2007-12-01.
^Singer, Siegfried Fred (1975). The Changing Global Environment. Springer. p. 90. ISBN978-9027704023.
^Gosink T (January 28, 1983). "What Do Carbon Monoxide Levels Mean?". Alaska Science Forum. Geophysical Institute, University of Alaska Fairbanks. Archived from the original on December 25, 2008. Retrieved December 16, 2008.
^Seinfeld, John; Pandis, Spyros (2006). Atmospheric Chemistry and Physics: From Air Pollution to Climate Change. John Wiley & Sons. ISBN978-0-471-72018-8.
^ abPenney, David; Benignus, Vernon; Kephalopoulos, Stylianos; Kotzias, Dimitrios; Kleinman, Michael; Verrier, Agnes (2010), "Carbon monoxide", WHO Guidelines for Indoor Air Quality: Selected Pollutants, World Health Organization, ISBN978-92-890-0213-4, OCLC696099951, archived from the original on March 8, 2021, retrieved March 18, 2024
^Chatani, N.; Murai, S. "Carbon Monoxide" in Encyclopedia of Reagents for Organic Synthesis (Ed: L. Paquette) 2004, J. Wiley & Sons, New York. doi:10.1002/047084289X
^Büchner, W.; Weiss, E. (1964). "Zur Kenntnis der sogenannten "Alkalicarbonyle" IV[1] Über die Reaktion von geschmolzenem Kalium mit Kohlenmonoxid". Helvetica Chimica Acta. 47 (6): 1415–1423. doi:10.1002/hlca.19640470604.
^Katz, Allen I.; Schiferl, David; Mills, Robert L. (1984). "New phases and chemical reactions in solid carbon monoxide under pressure". The Journal of Physical Chemistry. 88 (15): 3176–3179. doi:10.1021/j150659a007.
^Zheng, Yun; Wang, Jianchen; Yu, Bo; Zhang, Wenqiang; Chen, Jing; Qiao, Jinli; Zhang, Jiujun (2017). "A review of high temperature co-electrolysis of H O and CO to produce sustainable fuels using solid oxide electrolysis cells (SOECs): advanced materials and technology". Chem. Soc. Rev. 46 (5): 1427–1463. doi:10.1039/C6CS00403B. PMID28165079.
DarabaniKotaLetak DarabaniNegara RumaniaProvinsiBotoşaniStatusKotaPemerintahan • Wali kotaCorneliu Arosoaie (Partidul Social Democrat)Luas • Total99,85 km2 (3,855 sq mi)Populasi (2004) • Total11.864Zona waktuUTC+2 (EET) • Musim panas (DST)UTC+3 (EEST) Darabani adalah kota yang terletak di provinsi Botoşani, Rumania. Pada tahun 2004, kota ini diperkirakan memiliki jumlah penduduk sebesar 11.867 jiwa. Pranala luar Daraba...
Place in Mid Jutland, DenmarkRøndeLooking down Rønde's main streetRøndeShow map of DenmarkRøndeShow map of Denmark Central Denmark RegionCoordinates: 56°18′02″N 10°28′40″E / 56.30056°N 10.47778°E / 56.30056; 10.47778CountryDenmarkRegionMid Jutland (Midjylland)MunicipalitySyddjursArea • Urban2.3 km2 (0.9 sq mi)Elevation5 - 100 m (−323 ft)Population (2023) • Urban3,295 • Urban densi...
LGBT rights in MaltaLocation of Malta (orange)– in Europe (tan & dark grey)– in the European Union (tan) [Legend]StatusLegal since 29 January 1973[1]Gender identityTransgender people can change gender with or without surgeryMilitaryLGBT people allowed to serve openlyDiscrimination protectionsSexual orientation, gender identity, gender expression and sex characteristics protectionsFamily rightsRecognition of relationshipsCivil u...
Sculpture in Puerto Vallarta, Jalisco, Mexico The Good Fortune UnicornSpanish: El Unicornio de la Buena FortunaThe sculpture in 2024ArtistAnibal RiebelingLocationPuerto Vallarta, Jalisco, MexicoCoordinates20°36′44.7″N 105°14′2.7″W / 20.612417°N 105.234083°W / 20.612417; -105.234083 The Good Fortune Unicorn (Spanish: El Unicornio de la Buena Fortuna) is a sculpture by Anibal Riebeling, installed along Puerto Vallarta's Malecón, in the Mexican state of Jalis...
NML Cygni yang berlokasi di Rasi Bintang Cygnus. NML Cygni atau V1489 Cygni adalah bintang Hyper Raksasa merah yang terletak di Rasi Bintang Cygnus dan merupakan salah satu bintang terbesar yang diketahui saat ini, dan juga salah satu bintang paling terang di galaksi Bima Sakti dan paling masif yang pernah diketahui. Dengan radius sekitar 1640 kali radius Matahari, NML Cygni merupakan bintang paling cemerlang di Rasi bintang Cygnus. Nama NML berasal dari tiga penemu yang menemukan bintang ter...
Tapak Suci Putera MuhammadiyahTipeOrganisasi Pencak SilatKantor pusatpasar baru, Yogyakarta, IndonesiaKetua UmumMuhammad Afnan Hadikusumo Para santri PPTQM Pakan Sinayan, Kabupaten Agam, Sumatera Barat sedang berlatih Tapak Suci Tapak Suci Putera Muhammadiyah, atau disingkat Tapak Suci, adalah sebuah aliran, perguruan, dan organisasi pencak silat yang merupakan anggota Ikatan Pencak Silat Indonesia (IPSI). Tapak Suci termasuk dalam 10 perguruan historis IPSI, yaitu perguruan yang menunjang tu...
Lipton Championships 1995 Sport Tennis Data 17 marzo – 26 marzo Edizione 11a Superficie Cemento Campioni Singolare maschile Andre Agassi Singolare femminile Steffi Graf Doppio maschile Todd Woodbridge / Mark Woodforde Doppio femminile Jana Novotná / Arantxa Sánchez Vicario 1994 1996 Il Miami Masters 1995 (conosciuto anche come Lipton Championships per motivi di sponsorizzazione) è stato un torneo di tennis giocato sul cemento. È stata l'11ª edizione del Miami Masters, che fa parte del...
Cairo Citadel was first established by Saladin and later expanded by several rulers including Muhammad Ali Pasha. It is included in a World Heritage Site Historic Cairo.[1] Qaitbay Citadel in Alexandria is one of the well preserved Egyptian castles. Many buildings in Egypt can be put under the classification of castles, citadels, forts, and fortifications. List by age Pharaonic Lower Egypt Fortification of Memphis[2] Fort of Walls of the Prince (inebw heka), Eastern Delta. ...
Prozentualer Anteil von Menschen deutscher Abstammung zur Gesamtpopulation Australiens im Jahr 2011 Deutsche in Australien, auch Deutschstämmige in Australien, waren nach der Volkszählung im Jahr 2011 die sechstgrößte ethnische Gruppe in Australien.[1] Die Beziehung von Deutschen und Australiern sind Jahrhunderte alt. Bereits im frühen 19. Jahrhundert kamen Forscher und Missionare nach Australien. Einer der bekanntesten Deutschen in Australien ist der Entdeckungsreisende Ludwig L...
هذه المقالة بحاجة لصندوق معلومات. فضلًا ساعد في تحسين هذه المقالة بإضافة صندوق معلومات مخصص إليها. خريطة لكوبا (أحمر)، أنغولا (أخضر)، وجنوب أفريقيا (أزرق) في نوفمبر 1975، وعشية استقلال أنغولا، بدأت كوبا بتدخل عسكري واسع النطاق دعماً للحركة الشعبية لتحرير أنغولا (MPLA) ذات الميول...
2014 police shooting in New York City Killing of Akai GurleyDateNovember 20, 2014 (2014-11-20)Timec. 11:15 p.m. ESTLocationBrooklyn, New York City, New York, U.S.ParticipantsKilled: Akai GurleyOfficers: Peter Liang and Shaun LandauDeathsAkai GurleySuspectsPeter LiangChargesSecond-degree manslaughter, criminally negligent homicide, second-degree assault, reckless endangerment, two counts of official misconductConvictionsManslaughter (reduced at sentencing to criminally negligent...
Front page of The Tasmanian, 1 January 1881 The Tasmanian was a newspaper published in Launceston, Tasmania, Australia between 1871 and 1895.[1] Digitised editions from 1881 to 1895 are available via Trove.[1] See also List of newspapers in Australia References ^ a b The Tasmanian. National Library of Australia. Retrieved 26 August 2016. External links Media related to The Tasmanian at Wikimedia Commons The Tasmanian (Launceston, Tas. : 1871 - 1879) at Trove The ...
Island in the Isles of Scilly, UK For other uses, see Saint Agnes (disambiguation). Human settlement in EnglandSt. AgnesCornish: AgenysA map of St. Agnes, with Gugh to the eastSt. AgnesLocation within Isles of ScillyPopulation82 (2011)OS grid referenceSV881430Civil parishSt AgnesUnitary authorityIsles of ScillyCeremonial countyCornwallRegionSouth WestCountryEnglandSovereign stateUnited KingdomPost townISLES OF SCILLYPostcode districtTR22Dialling code017...
Citadel in Rethymno, Greece FortezzaΦορτέτζαRethymno, Crete, Greece View of Rethymno with the Fortezza in the backgroundMap of the Fortezza of RethymnoCoordinates35°22′19.2″N 24°28′15.6″E / 35.372000°N 24.471000°E / 35.372000; 24.471000TypeCitadelSite informationControlled byMinistry of Culture and SportsOpen tothe publicYesConditionIntactSite historyBuilt1573–1580Built byRepublic of VeniceIn use1580–20th centuryMaterial...
Questa voce sull'argomento registi olandesi è solo un abbozzo. Contribuisci a migliorarla secondo le convenzioni di Wikipedia. John Appel John Appel (Wognum, 25 novembre 1958) è un regista olandese. Biografia Laureatosi nel 1987 presso l'Accademia di Cinema di Amsterdam, è autore di numerosi documentari. Nel 1999 è stato premiato con il Joris Ivens Award in occasione dell'International Documentary Film Festival Amsterdam, per il documentario Andre Hazes/She Belevies in Me. Filmograf...
Gorilla Zoe discographyGorilla Zoe in Cedar Rapids, IowaStudio albums3Singles10Mixtapes34Extended plays1 This is the discography of American rapper Gorilla Zoe. Albums Studio albums List of albums, with selected chart positions Title Album details Peak chart positions US[1] USR&B[2] USRap[3] Welcome to the Zoo Released: September 25, 2007 Label: Block, Bad Boy South, Atlantic Format: CD, digital download 18 8 3 Don't Feed da Animals Released: March ...
American football player, analyst and coach (born 1972) Trent DilferDilfer with the 49ers in November 2007Current positionTitleHead coachTeamUABConferenceAACRecord5–11Annual salary$1.3 million[1]Biographical detailsBorn (1972-03-13) March 13, 1972 (age 52)Santa Cruz, California, U.S.Alma materCalifornia State University, FresnoPlaying career1990–1993Fresno State1994–1999Tampa Bay Buccaneers2000Baltimore Ravens2001–2004Seattle Seahawks2005Cleveland Browns2006–2007Sa...