PROFILPELAJAR.COM

Alfa Romeo Tipo 512
Category	Voiturette
Constructor	Alfa Romeo
Designer(s)	Wifredo Ricart / Gioacchino Colombo
Successor	Alfa Romeo 158
Technical specifications
Chassis	Single-seater, tubular frame
Suspension (front)	wishbones, longitudinal torsion bar, friction dampers, hydraulic shock absorbers
Suspension (rear)	De-Dion-axle, longitudinal torsion bar, friction dampers, telescopic shock absorbers
Axle track	Front:1,320 mm (52.0 in); Rear:1,310 mm (51.6 in)
Wheelbase	2,450 mm (96.5 in)
Engine	1489 cc V12 180° Roots-type supercharger, Mid, longitudinally mounted ; – 335 bhp (250 kW) @ 8600 rpm
Transmission	5-speed manual.
Weight	710 kg (1,570 lb)
Competition history

The Alfa Romeo Tipo 512 was intended to replace the Alfa Romeo 158 Voiturette racing car. It was designed by Wifredo Ricart as his second car for Alfa Romeo after the V16 engined Alfa Romeo Tipo 162.

It was the first mid-engined Alfa Romeo intended racing car. It was fitted with a flat 12 engine (technically speaking it is a 180 degree V12) using a mid-engine layout. With two Roots-type superchargers, the engine could produce up to 225 bhp (168 kW) per litre. The engine had very short stroke compared to other Grands Prix cars at that time, only 54.2 millimetres (2.13 in) (bore 54mm).

On June 19, 1940 Alfa Romeo's test driver Attilio Marinoni was killed while testing the 512 suspension fitted to an Alfetta 158.^[3]

Later, on September 12, 1940, the Tipo 512 was first tested, by Alfa Romeo chief test driver Consalvo Sanesi; despite being very powerful its handling was not thought to be good enough.^[4]

Car development was stopped during World War II. Another chassis was built, but that car never raced. Both prototypes are currently on display at the Alfa Romeo Historical Museum in Arese, Italy. ^[5]

The potential of this machine is not very clear, since it remained an unraced prototype. The power of the engine measured at the bench was 335 bhp (250 kW) at 8600 rpm. In the Alfa Romeo museum in Arese, alongside the 512 displayed, is the following data: maximum power (estimated) 500 hp (373 kW) at 11,000 rpm and maximum speed over 350 km/h (217 mph).

Alfa Romeo eventually won the Formula 1 World Championship with the Alfetta 158 in 1950, taking the place for which the 512 was originally designed.

Technical data

Technical data	Tipo 152
Engine:	12-cylinder 180° V-engine
displacement:	1489 cm³
Bore x stroke:	54 x 54.2 mm
Max power:	335 hp at 8 600 rpm
Valve control:	2 overhead camshafts per cylinder row, 2 valves per cylinder
Upload:	Roots compressor
Gearbox:	5-speed manual
Chassis:	Trusssram
suspension front:	Double cross links, longitudinal torsion bars
suspension rear:	De Dion shaft, Watt link, longitudinal torsion bars
Brakes:	Hydraulic drum brakes
Wheelbase:	245 cm
Dry weight:	710 kg

References

^ "ALFA ROMEO". kolumbus.fi/leif.snellman. Archived from the original on 7 October 2008. Retrieved 2008-09-20.
^ ^a ^b "Alfa Romeo 512". ultimatecarpage.com. Retrieved 2008-09-20.
^ "The rear-engined revolution". forix.autosport.com. Archived from the original on 28 October 2008. Retrieved 2008-09-21.
^ Borgeson, Griffith (2002). The Alfa Romeo Tradition. Somerset, England: Haynes Publishing Group. 0-85429-875-4.
^ "Automobile da corsa - Alfa Romeo Gran Premio 512". museoscienza.org (in Italian). Retrieved 14 October 2012.