Endeavour moved from the Vehicle Assembly Building to launch pad 39A. The process started at 04:13 EST on January 6, 2010. Before rolling out to the launch pad, engineers at Kennedy Space Center had an extended preparation time to get Endeavour ready to move to the launch pad due to the unusually cold weather. The 3.4 miles (5.5 km) was completed at 10:37 EST. The trip took 6hrs 24min.
Launch attempts
The first launch attempt was scheduled for 04:39:00 EST February 7, 2010, with forecasters originally predicting a 70% chance of favorable launch weather conditions at the Kennedy Space Center,[15] but that degraded to 30% hours before the planned launch due to low clouds.[16] The launch was scrubbed. The second launch attempt was successful at 04:14:08 EST (9:14:08 UTC) February 8, 2010.
34th night launch of a shuttle, 21st night launch from launch pad 39A
Mission timeline
February 8 (Flight Day 1: Launch)
Launch video (10 min 12 secs)
Endeavour launched successfully at 4:14:08 EST (9:14:08 UTC). When Endeavour lifted off, the space station was traveling about 212 miles over western Romania.[20] Once in orbit the crew opened the payload bay doors, activated the radiators and deployed the Ku band antenna. Nick Patrick and Kay Hire then proceeded to activate, did a check out of the Shuttle Robotic Arm (SRMS) and then conducted a survey of the payload bay. The crew was also successful in down-linking imagery and video of the external tank to the ground.
Space Shuttle Endeavour launches from Kennedy Space Center, 8 February 2010.
Guests look on from the terrace of Operations Support Building II during the launch.
An exhaust cloud engulfs Launch Pad 39A during the launch.
Bolden, left, congratulates Leinbach and the launch team in Firing Room Four of the Launch Control Center for a successful launch.
February 9 (Flight Day 2)
Most of the crew day was spent on conducting the standard inspection of the thermal protection system (TPS).[21] All six of the crew members participated at one point during this task. Once the inspection process had moved to the port wing, astronauts Bob Behnken and Nick Patrick began working on checking out and preparing the spacesuits that will be used during the mission's three spacewalks. Once the survey of the TPS was complete, Stephen Robinson and Kay Hire, with Bob Behnken joining once his spacesuit tasks were complete, began checking out and preparing the tools that will be used during the rendezvous with the International Space Station (ISS). These tools include a hand-held LIDAR gun used for finding out the closing rate of the shuttle and distance from the ISS, the Orbiter Docking System (ODS) which is the part of the shuttle that connects to the space station and a centerline camera in the ODS to assist the commander George Zamka during docking.
February 10 (Flight Day 3: Rendezvous with ISS)
During the first part of the crew's workday, they performed a series of burns to catch up and dock with the International Space Station (ISS). Once the shuttle was 600 feet (180 m) below the ISS, commander George Zamka began what is known as the Rendezvous Pitch Maneuver (RPM). During the maneuver, ISS commander Jeff Williams and flight engineer Oleg Kotov took photos of the shuttle's thermal protection system (TPS). Space Shuttle Endeavour docked with the ISS at 5:26 UTC (00:06 EST). After completing leak checks the hatches between both vehicles were opened at 6:26 UTC (1:26 EST). The joint Expedition 22/STS-130 crew conducted the standard welcome ceremony and then conducted their safety brief. Once that was complete commander George Zamka, Bob Behnken and Steve Robinson began transferring the spacesuits Behnken and Nick Patrick will use for the three spacewalks. Also during this time Nick Patrick and ISS flight engineer T.J. Creamer picked up the OBSS boom and handed it off to the Space Shuttle robot arm using the station's SSRMS or Canadarm2. The shuttle arm was operated by Kay Hire and pilot Terry Virts.
Image of Endeavour's aft section taken during the shuttle's approach prior to docking.
Space Station as photographed by a shuttle crew member.
Endeavour approaches the ISS, silhouetted by the Earth's horizon.
February 11 (Flight Day 4: Spacewalk 1 preparation)
Flight day 4 saw Nick Patrick and Bob Behnken get all the tools they need ready for their spacewalk on flight day 5. While Patrick and Behnken were getting the tools ready, commander George Zamka and ISS flight engineer Soichi Noguchi swapped out the Hard Upper Torso (HUT) on Bob Behnken's suit, since the original HUT had developed a problem with a wire harness and was not powering the Wireless Video System (WVS) or the heaters in his gloves and boots. Once the swap was complete, Zamka and Noguchi tested the suit successfully. The crew also performed a number of transfer related activities during the morning of their work day. After a joint meal together, the crew of STS-130 and ISS commander Jeff Williams and flight engineer T.J. Creamer conducted a PAO event with television stations in Sacramento, California, Mobile, Alabama and a radio station in St. Louis, Missouri. Once the PAO event was finished, the joint crews had some off duty time for the rest of the day. Before the two crews went to bed they conducted a spacewalk procedures review, then got Nick Patrick and Bob Behnken into the Quest Airlock.[22] Behnken and Patrick spent the night there at 10.2 psi instead of at the station's 14.6 psi, breathing pure oxygen for an hour before and after their sleep period in order to prevent decompression sickness.
February 12 (Flight Day 5: Spacewalk 1)
Astronauts Behnken and Patrick participate in the first spacewalk.
Flight day 5 saw astronauts Nick Patrick and Bob Behnken perform the mission's first spacewalk,[23] which began on time at 02:17 UTC. Their first task was to move the payload bay of Endeavour and prepare and release launch locks on the Tranquility module and Cupola. Once Behnken and Patrick were clear of its path, the Tranquility module was moved to the port side of the Unity node using the space station's robot arm. Before Tranquility was installed the spacewalkers removed Dextre's ORU platform and secured it to one of the truss segments to function as a backup for a platform to be installed on STS-132. Once the new module was in place, the spacewalkers proceeded to connect temporary heater and data cables between Unity and Tranquility. Behnken and Patrick were ahead of the timeline so they were also able to complete some get-ahead tasks. The spacewalk was completed six and a half hours later, on Friday, 08:49 UTC. After the spacewalk, other crew members completed transfer-related tasks. The transfers are now over halfway complete.
February 13 (Flight Day 6: Spacewalk 2 preparation)
On flight day 6 members of the joint crew opened the hatches to the new Tranquility module for the first time. STS-130 crew-members George Zamka, Terry Virts, Stephen Robinson and Kay Hire all helped in the initial outfitting of the node. During the initial outfitting, Terry Virts and Kay Hire prepared the Cupola for its move from the end of Node 3. While that was going on spacewalkers Bob Behnken and Nick Patrick re-sized and repaired Bob Behnken's original suit for use by Nick Patrick, after a small problem with a fan was discovered. Once that task was complete the pair began getting their tools ready for the second of three spacewalks. Throughout the day there were 2 PAO events, the first was a special event conducted by Capcom Mike Massimino. Massimino asked Bob Behnken and Nick Patrick questions he received through his Twitter account. Later in the day Kay Hire and Terry Virts took questions from the Associated Press, CBS News and Reuters.[24] At the end of the day the whole crew conducted another EVA procedures review in preparation for EVA2.
February 14 (Flight Day 7: Spacewalk 2)
Robert Behnken participates in the second spacewalk.
The second of three spacewalks was completed on flight day 7.[25]Bob Behnken and Nick Patrick were able to complete all their planned tasks in 5 hours and 54 minutes.[26] The tasks included installing ammonia coolant loops, thermal blankets to protect the ammonia hoses, outfitting the Earth-facing port of Tranquility for the Cupola, install handrails and a non-propulsive vent valve (NPV). During the connection of one of the ammonia hoses, a small amount of ammonia leaked out of a quick disconnect valve and floated towards Nick Patrick. Procedures called for a "bake-out" while Patrick worked during the sunlit portion of the orbit, and a contamination test in the airlock. The bake-out happened at the end of the spacewalk. While the spacewalk was happening, Terry Virts and Kay Hire along with ISS commander Jeff Williams, Soichi Noguchi and T.J. Creamer, continued outfitting the Tranquility module. This included setting up the ventilation system, connecting electrical and computer cables and configuring racks. They confirmed lights and computers were on in the node once the ammonia cooling system had been activated. The crew also received word the mission had been extended by one day in the morning.
February 15 (Flight Day 8)
Cupola was moved by Canadarm2 from the forward port to the nadir port of TranquilityThe first photograph taken in the Cupola, one of two ISS modules installed during STS-130
On flight day 8, the Cupola was successfully moved from its launch location to its permanent location on the Earth-facing side of Tranquility.[27]Cupola was moved by the space station robot arm (SSRMS), which was operated by Kay Hire and Terry Virts. ISS commander Jeff Williams assisted them by releasing the bolts and hooks that held the Cupola in place and then securing it to its new home. The process was slightly delayed due to some bolts that were torqued tighter than expected on the ground, but flight controllers were able to increase the torque to release the bolts. Once the move of the Cupola was complete, outfitting continued to get the cupola ready. The crew will be able to ingress it tomorrow, but the window covers will not be opened until after the third and final spacewalk. While the Cupola relocation was going on, some of the crew members participated in transferring items between the shuttle and station. Also during this time Bob Behnken and Nick Patrick prepared the tools that they will use during the final spacewalk scheduled for flight day 10. During this time the pair re-sized another spacesuit on station for use by Behnken. This was done because the suit Behnken had been using had some problems with its communications equipment.
February 16 (Flight Day 9: Spacewalk 3 preparation)
Relocation of PMA-3 to the end of Tranquility
Flight day 9 saw the relocation of Pressurized Mating Adapter 3 (PMA-3) from the Harmony node, where it was temporarily located, to the end of Tranquility, where it remained until 2017.[28] The PMA will provide protection from micro-meteoroids and orbital debris. PMA-3 was moved by Bob Behnken and Nick Patrick, with help from Jeff Williams and Soichi Noguchi to release the PMA-3. During the PMA-3 relocation, Kay Hire and Terry Virts continued work on outfitting the Cupola. The joint Expedition 22/STS-130 crews enjoyed a meal together and had some off-duty time in the 2nd half of their day. Before the scheduled bedtime the entire crew conducted another EVA procedures review for the third and final EVA of the mission.
February 17 (Flight Day 10: Spacewalk 3)
Expedition 22 member Soichi Noguchi photographs the interior of the newly installed Cupola module
On flight day 10, astronauts Bob Behnken and Nick Patrick completed the third and final spacewalk of the STS-130 mission. Their tasks included hooking up heater and data cables for PMA-3, removing thermal covers and launch locks on Cupola, and installing handrails on Tranquility and a video cable for another base to be installed on the Russian segment of the ISS.[29] Bob Behnken also connected the second ammonia cooling loop and disconnected a temporary power cable on Tranquility. Once the launch locks were removed, pilot Terry Virts opened the windows on Cupola for the first time.[30] During the day Kay Hire and Terry Virts hooked up and transferred the Cupola robotics station for its use in the future. Terry Virts also completed some transfer tasks in the morning.
An image taken through the Cupola
Cupola open towards the Sahara desert
Nick Patrick outside the Cupola during spacewalk 3
Nick Patrick checking the view from inside.
February 18 (Flight Day 11)
On flight day 11, the joint Expedition 22/STS-130 crew received a phone call from U.S. President Barack Obama and several school children. After the conference with President Obama and the children, the crew members began transferring Environmental control and life support system (ECLSS) racks to the Tranquility module. These transfers were done by ISS commander Jeff Williams, flight engineer T.J. Creamer, Shuttle commander George Zamka and mission specialist Stephen Robinson and took most of the day. Also during the day pilot Terry Virts continued working on getting the Cupola set-up for the robotics work station. He had a small problem installing some corner panels which are needed to hold the workstation. Spacewalkers Bob Behnken and Nick Patrick were busy reconfiguring the airlock for use by the station crew and later flights. They also transferred their spacesuits and tools back to the shuttle for the return trip home. After the rack transfers were done the crew completed some more transfers and passed the 75% complete mark. The Space Shuttle commanded by commander George Zamka and pilot Terry Virts completed a reboost of the station using its vernier thrusters.[31][32]
President Obama during a call to the crew on flight day 11.
STS 130 crew members pose for a portrait in the Cupola
February 19 (Flight Day 12)
The STS-130 crew completed their remaining transfer tasks on flight day 12. The joint STS-130/Expedition 22 crew held a joint press conference with reports at NASA centers and in Japan. ISS commander Jeff Williams and shuttle commander George Zamka held a ribbon cutting ceremony to officially open the Cupola for use.[33] After the conference and ribbon cutting ceremony the crews gathered one last time for a meal together in the Unity module. After their meal the crews conducted a farewell ceremony and closed the hatches between the two vehicles.[34] The latter part of the STS-130 crew's day was spent stowing items and getting their rendezvous tools out and checking them out to ensure they are ready for undocking.
February 20 (Flight Day 13: Undocking)
Space Shuttle Endeavour successfully undocked with the ISS at 00:54 UTC (19:54 EST) on flight day 13. After undocking, pilot Terry Virts backed Endeavour to a distance of 400 feet (120 m) and began conducting a fly around of the ISS. After the fly around was complete, Virts used Endeavour's jets to move the shuttle to a point behind the station. Once the separation burns were complete, the crew conducted the late inspection of the shuttles thermal protection system. The inspection took up most of the crews afternoon with crew members rotating in and out to help with it.[35] Commander George Zamka performed a waste water and condensate water dump, with the help of Terry Virts.
The newly upgraded International Space Station seen from the shuttle after undocking.
Endeavour seen from the International Space Station after undocking
Port side of Endeavour's cargo bay after undocking.
February 21 (Flight Day 14: Landing Prep)
The crew of STS-130 began preparing the Space Shuttle Endeavour for landing.[36] During the day commander George Zamka and pilot Terry Virts, with help from mission specialist and flight engineer Stephen Robinson checked out the Flight Control System (FCS) and did a hot fire test of the Reaction Control System (RCS). Commander Zamka also did communications checks with mission control through the tracking stations at Merit Island, White Sands Space Harbor and Edwards Air Force Base. These checks are routine for the day before landing and were all successful. While all the system checkouts were going on, the rest of the crew were stowing items no longer needed during the flight. During the early part of the day Stephen Robinson and Terry Virts also stowed and deactivated the Space Shuttle robotic arm. The entire crew also took time out of their day to conduct an in-flight interview with CNN, CNN Español and Univision.[37]
February 22 (Flight Day 15: Landing)
Landing video (2 mins 57 secs)
Space Shuttle Endeavour and her STS-130 crew awoke on flight day 15 to begin getting ready for landing. The landing preparations included closing the payload bay doors, activating the Auxiliary Power Units and getting into their launch and entry suits. Commander George Zamka and pilot Terry Virts fired Endeavours 2 OMS engines for 2 mins 38 secs, this slowed Endeavour by about 200 ft/s (140 mph). The decision to go ahead with the de-orbit burn was made 25 min prior to the burn occurring. Landing occurred at 22:22:10 EST at the Kennedy Space Center'sShuttle Landing Facility runway 15.[38][39] The crew exited the orbiter and inspected it about two hours after landing. All six crew members spoke to the press on the runway before heading back to the Operations and Check-out building.[40]
Behnken and Patrick removed a protective cover on a port on the Unity node where Tranquility will be berthed halfway through the spacewalk. They then moved on to release launch locks and connects on Tranquility that connected it to the shuttle. The pair then removed a spare parts platform from Special Purpose Dexterous Manipulator or Dextre that will be replaced by a new one on a future mission. Once that task was completed Behnken and Patrick then made several connections on the newly installed Tranquility node to bring it to life.
EVA 2
Robert L. Behnken Nicholas Patrick
February 14, 2010 2:20 UTC
February 14, 2010 8:14 UTC
5 hours 54 minutes
Behnken and Patrick installed ammonia plumbing and connectors between Unity, Destiny, and Tranquility and cover them with thermal insulation. When turned on, the ammonia will provide cooling to Tranquility. They then prepared a port on the Earth-facing side of Tranquility for the flight day 8 relocation and attachment of the Cupola.
EVA 3
Nicholas Patrick Robert L. Behnken
February 17, 2010 2:15 UTC
February 17, 2010 8:03 UTC
5 hours 48 minutes
Behnken and Patrick turned on the ammonia cooling lines between Unity and Tranquility, installed heater and data cables on Tranquility, removed insulation and launch locks from the newly installed Cupola, and installed handrails on the outside of Tranquility.
Wake-up calls
NASA began a tradition of playing music to astronauts during the Gemini program, which was first used to wake up a flight crew during Apollo 15.
Each track is specially chosen, often by their families, and usually has a special meaning to an individual member of the crew, or is applicable to their daily activities.[42][43]
^ ab"Launch Weather Forecast"(PDF). United States Airforce, 45th Weather Squadron. Archived from the original(PDF) on February 15, 2010. Retrieved February 7, 2010.
Launches are separated by dots ( • ), payloads by commas ( , ), multiple names for the same satellite by slashes ( / ). Crewed flights are underlined. Launch failures are marked with the † sign. Payloads deployed from other spacecraft are (enclosed in parentheses).
Daftar ini belum tentu lengkap. Anda dapat membantu Wikipedia dengan mengembangkannya. Peta yang menunjukan lokasi domestikasi sejumlah tanaman pertanian Domestikasi merupakan pengadopsian tumbuhan dan hewan dari kehidupan liar ke dalam lingkungan kehidupan sehari-hari manusia. Agar tumbuhan dikatakan telah dijinakkan, perilaku, siklus hidup, dan penampakan luarnya telah berubah akibat pemuliaan selektif yang dilakukan oleh manusia selama beberapa generasi. Makanan Pohon buah Artikel utama: D...
Acetobacter SEM dari Acetobacter aceti Klasifikasi ilmiah Domain: Bacteria Filum: Proteobacteria Kelas: Alphaproteobacteria Ordo: Rhodospirillales Famili: Acetobacteraceae Genus: AcetobacterBeijerinck 1898 Spesies tipe Acetobacter aceti Spesies A. aceti A. cerevisiae A. cibinongensis A. estunensis A. indonesiensis A. liquefaciens A. lovaniensis A. malorum A. nitrogenifigens A. oeni A. orientalis A. orleanensis A. pasteurianus A. peroxydans A. pomorum A. syzygii A. tropicalis Acetobacter adal...
Henry Louis Le Chatelier Dalam kimia, prinsip Le Chatelier (di eja /lə ˈʃɑːtlieɪ/), atau disebut pula asas Le Chatelier atau Hukum Kesetimbangan, dapat digunakan untuk memprediksi efek perubahan di dalam kondisi pada kesetimbangan kimia. Prinsip ini dinamai dari Henry Louis Le Chatelier dan terkadang dari Karl Ferdinand Braun yang menemukan prinsip ini secara mandiri. Prinsip ini dapat dinyatakan sebagai: Ketika suatu sistem pada kesetimbangan mengalami perubahan konsentrasi, suhu, volu...
Minnesota Senate election, 2000 ← 1996 November 7, 2000 (2000-11-07) 2002 → All 67 seats in the Minnesota Senate34 seats needed for a majority Majority party Minority party Leader Roger Moe Dick Day Party Democratic (DFL) Republican Leader since 1980 July 9, 1997 Leader's seat 2nd–Erskine 28th–Owatonna Last election 42 seats 24 seats Seats before 40 26 Seats won 39 27 Seat change 1 1 Popular vote 1,219,...
Visual indicator of the amplitude of an electronic signal EM34 tuning eye EM84 tuning indicator A magic eye tube or tuning indicator, in technical literature called an electron-ray indicator tube,[1] is a vacuum tube which gives a visual indication of the amplitude of an electronic signal, such as an audio output, radio-frequency signal strength, or other functions.[1] The magic eye (also called a cat's eye, or tuning eye in North America) is a specific type of such a tube wi...
DC Comics character Comics character LoboLobo as depicted in Lobo Unbound #1 (August 2003).Art by Alex Horley.Publication informationPublisherDC ComicsFirst appearanceOmega Men #3 (June 1983)Created byRoger Slifer Keith GiffenIn-story informationSpeciesCzarnianPlace of originCzarniaTeam affiliationsJustice LeagueL.E.G.I.O.N.Young JusticeChurch of the Triple-Fish GodR.E.B.E.L.S.Suicide SquadRed Lantern CorpsNotable aliasesThe Main ManThe 'BoMaster FragThe Last CzarnianMister MacheteScourge o' ...
Si ce bandeau n'est plus pertinent, retirez-le. Cliquez ici pour en savoir plus. Cet article ne cite pas suffisamment ses sources (mai 2014). Si vous disposez d'ouvrages ou d'articles de référence ou si vous connaissez des sites web de qualité traitant du thème abordé ici, merci de compléter l'article en donnant les références utiles à sa vérifiabilité et en les liant à la section « Notes et références ». En pratique : Quelles sources sont attendues ? Comme...
This article is about Psalm 123 in Hebrew (Masoretic) numbering. For Psalm 123 in Greek Septuagint or Latin Vulgate numbering, see Psalm 124. Psalm 123Unto thee lift I up mine eyesSong of AscentsMiniature psaume 123, The Redeemer of Israel in the Très Riches Heures du Duc de Berry, David praying before an altar surrounded by four figures symbolising people in dangerOther name Psalm 122 (Vulgate) Ad te levavi oculos meos LanguageHebrew (original) Psalm 123← Psalm 122Psalm 124 →B...
Men's association football team This article is about the men's team. For the women's team, see Croatia women's national football team. CroatiaNickname(s)Vatreni (Blazers)Kockasti (Checkered Ones)AssociationCroatian Football Federation (Hrvatski nogometni savez, HNS)ConfederationUEFA (Europe)Head coachZlatko DalićCaptainLuka ModrićMost capsLuka Modrić (175)Top scorerDavor Šuker (45)FIFA codeCRO First colours Second colours FIFA rankingCurrent 10 (4 April 2024)[1]Highest3 (1998)Low...
يفتقر محتوى هذه المقالة إلى الاستشهاد بمصادر. فضلاً، ساهم في تطوير هذه المقالة من خلال إضافة مصادر موثوق بها. أي معلومات غير موثقة يمكن التشكيك بها وإزالتها. (يوليو 2016) هذه المقالة يتيمة إذ تصل إليها مقالات أخرى قليلة جدًا. فضلًا، ساعد بإضافة وصلة إليها في مقالات متعلقة بها. ...
American politician Isaac C. Naylor3rd Mayor of DallasIn officeApril 1858 – August 1858Preceded byJohn McClannahan CrockettSucceeded byA. D. Rice Personal detailsBorn(1824-07-01)July 1, 1824Morgan County, OhioDiedApril 16, 1885(1885-04-16) (aged 60)Galveston, TexasResting placeCity Cemetery, Galveston, TexasNationality USASpouseHenrietta WoodChildrenEdward Wood Naylor, Isaac B. Naylor, Charles H. NaylorOccupationLawyer, Merchant Isaac C. Naylor (1 Jul 1824 – 16 Apr ...
Samoan swimmer Brandon SchusterPersonal informationNationality SamoaBorn (1998-04-23) 23 April 1998 (age 26)Suva, FijiHeight188 cm (6 ft 2 in)Weight75 kg (165 lb)SportSportSwimmingEvent(s)Freestyle, Backstroke, Individual MedleyClubTanifa O Le Vai Swim Club Medal record Men's swimming Representing Samoa Pacific Games 2019 Apia 200 m backstroke 2019 Apia 400 m medley 2015 Port Moresby 400 m medley 2019 Apia 200 m medley 2015 Port Mor...
American musician (1910–1978) For his son, the entertainer born in 1965, see Louis Prima Jr. Louis PrimaPrima in 1947Background informationBirth nameLouis Leo PrimaAlso known asThe King of SwingBorn(1910-12-07)December 7, 1910New Orleans, Louisiana, U.S.DiedAugust 24, 1978(1978-08-24) (aged 67)New Orleans, Louisiana, U.S.GenresJazzswingtraditional popjump bluesbig bandOccupation(s)MusicianentertainerbandleaderInstrumentsVocalstrumpetYears active1929–1975LabelsCapitol, DotSpouse(s) Lo...
Questa voce sull'argomento nuotatori kazaki è solo un abbozzo. Contribuisci a migliorarla secondo le convenzioni di Wikipedia. Segui i suggerimenti del progetto di riferimento. Evgenij RyžkovNazionalità Kazakistan Altezza182 cm Peso82 kg Nuoto Specialità200 metri rana200 metri misti Palmarès Competizione Ori Argenti Bronzi Mondiali in vasca corta 0 0 1 Giochi asiatici 0 0 1 Vedi maggiori dettagliStatistiche aggiornate al 20 agosto 2007 Modifica dati su Wikidata · Man...
Meeldraad schematisch: 1=helmdraad, 2=helmhokje, 3=helmbindsel, 4=microspore moedercellen. Het helmbindsel (connectivum) verbindt de beide helmhokjes van de helmknop van een meeldraad en is een voortzetting van de helmdraad. De verbinding tussen helmknop en helmdraad kan zijn vastgegroeid (adnate of dorsifixed) waarbij de helmdraad zonder scherpe grens overgaat in het helmbindsel. Het helmbindsel kan soms ook aan de top (apicaal) verlengd zijn of aanhangsels, zoals baarden bij de mattenbies, ...
This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.Find sources: 8th Infantry Division United States – news · newspapers · books · scholar · JSTOR (October 2022) (Learn how and when to remove this message) 8th Infantry Division8th Infantry Division shoulder sleeve insigniaActive1918–19191940–19451950–1992Country&#...
.jpg)
