Algebraic notation is the standard method for recording and describing the moves in a game of chess. It is based on a system of coordinates to uniquely identify each square on the board.^[1] It is now almost universally used by books, magazines, newspapers and software, and is the only form of notation recognized by FIDE,^[2] the international chess governing body.

An early form of algebraic notation was invented by the Syrian player Philip Stamma in the 18th century. In the 19th century, it came into general use in German chess literature, and was subsequently adopted in Russian chess literature. In English-speaking countries, the parallel method of descriptive notation was generally used in chess publications until the 1980s. Similar descriptive systems were in use in Spain and France. A few players still use descriptive notation, but it is no longer recognized by FIDE.

The term "algebraic notation" may be considered a misnomer, as the system is unrelated to algebra.^[1]

Each square of the board is identified by a unique coordinate pair—a letter and a number—from White's point of view. The vertical columns of squares, called files, are labeled a through h from White's left (the queenside) to right (the kingside). The horizontal rows of squares, called ranks, are numbered 1 to 8 starting from White's side of the board. Thus each square has a unique identification of file letter followed by rank number. For example, the initial square of White's king is designated as "e1".

Each piece type (other than pawns) is identified by an uppercase letter. English-speaking players use the letters K for king, Q for queen, R for rook, B for bishop, and N for knight. Different initial letters are used by other languages.

In modern chess literature, especially that intended for an international audience, the language-specific letters are usually replaced by universally recognized piece symbols; for example, ♞c6 in place of Nc6. This style is known as figurine algebraic notation. The Unicode Miscellaneous Symbols set includes all the symbols necessary for figurine algebraic notation.^[3]

In standard (or short form) algebraic notation, each move of a piece is indicated by the piece's uppercase letter, plus the coordinates of the destination square. For example, Be5 (bishop moves to e5), Nf3 (knight moves to f3). For pawn moves, a letter indicating pawn is not used, only the destination square is given. For example, c5 (pawn moves to c5).

When a piece makes a capture, an "x" is inserted immediately before the destination square. For example, Bxe5 (bishop captures the piece on e5). When a pawn makes a capture, the file from which the pawn departed is used to identify the pawn. For example, exd5 (pawn on the e-file captures the piece on d5).

En passant captures are indicated by specifying the capturing pawn's file of departure, the "x", the destination square (not the square of the captured pawn), and (optionally) the suffix "e.p." indicating the capture was en passant.^[5] For example, exd6 e.p.

Sometimes a multiplication sign (×) or a colon (:) is used instead of "x", either in the middle (B:e5) or at the end (Be5:). Some publications, such as the Encyclopaedia of Chess Openings (ECO), omit any indication that a capture has been made; for example, Be5 instead of Bxe5; ed6 instead of exd6 or exd6 e.p.

When it is unambiguous to do so, a pawn capture is sometimes described by specifying only the files involved (exd or even ed). These shortened forms are sometimes called abbreviated algebraic notation or minimal algebraic notation.

	a	b	c	d	e	f	g	h
8									8
7									7
6									6
5									5
4									4
3									3
2									2
1									1
	a	b	c	d	e	f	g	h

1) ...Rdf8, 2) R1a3, 3) Qh4e1

When two (or more) identical pieces can move to the same square, the moving piece is uniquely identified by specifying the piece's letter, followed by (in descending order of preference):

1. the file of departure (if they differ)
2. the rank of departure (if the files are the same but the ranks differ)

If neither file nor rank alone is sufficient to identify the piece (such as when three or more pieces of the same type can move to the same square), then both are specified (double disambiguation).

In the diagram, both black rooks could legally move to f8, so the move of the d8-rook to f8 is disambiguated as Rdf8. For the white rooks on the a-file which could both move to a3, it is necessary to provide the rank of the moving piece, i.e., R1a3.

In the case of the white queen on h4 moving to e1, neither the rank nor file alone are sufficient to disambiguate from the other white queens. As such, this move is written Qh4e1.

As above, an "x" can be inserted to indicate a capture; for example, if the final case were a capture, it would be written as Qh4xe1.

When a pawn promotes, the piece promoted to is indicated at the end. For example, a pawn on e7 promoting to a queen on e8 may be variously rendered as e8Q, e8=Q, e8(Q), e8/Q etc.

FIDE specifies draw offers to be recorded by an equals sign with parentheses "(=)" after the move on the score sheet.^[6] This is not usually included in published game scores.

Castling is indicated by the special notations 0-0 (for kingside castling) and 0-0-0 (queenside castling). O-O and O-O-O (letter O rather than digit 0) are also commonly used.^[a]

A move that places the opponent's king in check usually has the symbol "+" appended. Alternatively, sometimes a dagger (†) or the abbreviation "ch" is used. Some publications indicate a discovered check with an abbreviation such as "dis ch", or with a specific symbol. Double check is usually indicated the same as check, but is sometimes represented specifically as "dbl ch" or "++", particularly in older chess literature. Some publications such as ECO omit any indication of check.

Checkmate at the completion of moves is represented by the symbol "#" in standard FIDE notation and PGN. The word mate is commonly used instead; occasionally a double dagger (‡) or a double plus sign (++) is used, although the double plus sign is also used to represent "double check" when a king is under attack by two enemy pieces simultaneously. A checkmate is represented by "≠" (the not equal sign) in the macOS chess application. In Russian and ex-USSR publications, where captures are indicated by ":", checkmate can also be represented by "X" or "x".

The notation 1–0 at the completion of moves indicates that White won, 0–1 indicates that Black won, and ½–½ indicates a draw. In case of forfeit, the scores 0–0, ½–0, and 0–½ are also possible.^[8][9] If player(s) lost by default, results are +/−, −/+, or −/−.

Often there is no indication regarding how a player won or lost (other than checkmate, see above), so simply 1–0 or 0–1 may be written to show that one player resigned or lost due to time control or forfeit. Similarly, there is more than one way for a game to end in a draw. Sometimes direct information is given by the words "White resigns" or "Black resigns", though this is not considered part of the notation but rather a return to the surrounding narrative text.

Besides the standard (or short) algebraic notation already described, several similar systems have been used.

In long algebraic notation, also known as fully expanded algebraic notation, both the starting and ending squares are specified, for example: e2e4. Sometimes these are separated by a hyphen, e.g. Nb1-c3, while captures are indicated by an "x", e.g. Rd3xd7. Long algebraic notation takes more space and is no longer commonly used in print; however, it has the advantage of clarity. Both short and long algebraic notation are acceptable for keeping a record of the moves on a scoresheet, as is required in FIDE rated games.

A form of long algebraic notation (without piece names) is also used by the Universal Chess Interface (UCI) standard, which is a common way for graphical chess programs to communicate with chess engines, e.g. e2e4, e1g1 (castling), e7e8q (promotion).^[10]

In international correspondence chess the use of algebraic notation may cause confusion, since different languages employ different names (and therefore different initial letters) for the pieces, and some players may be unfamiliar with the Latin alphabet. Hence, the standard for transmitting moves by post or email is ICCF numeric notation, which identifies squares using numerical coordinates, and identifies both the departure and destination squares. For example, the move 1.e4 is rendered as 1.5254. In recent years, the majority of correspondence games have been played on on-line servers rather than by email or post, leading to a decline in the use of ICCF numeric notation.

Portable Game Notation (PGN) is a text-based file format for storing chess games, which uses standard English algebraic notation and a small amount of markup.^[11] PGN can be processed by almost all chess software, as well as being easily readable by humans. For example, the Game of the Century could be represented as follows in PGN:

[Event "Third Rosenwald Trophy"]
[Site "New York, NY USA"]
[Date "1956.10.17"]
[EventDate "1956.10.07"]
[Round "8"]
[Result "0-1"]
[White "Donald Byrne"]
[Black "Robert James Fischer"]
[ECO "D92"]
[WhiteElo "?"]
[BlackElo "?"]
[PlyCount "82"]

1.Nf3 Nf6 2.c4 g6 3.Nc3 Bg7 4.d4 O-O 5.Bf4 d5 6.Qb3 dxc4 7.Qxc4 c6 8.e4 Nbd7 9.Rd1 Nb6 10.Qc5 Bg4 11.Bg5 Na4 12.Qa3 Nxc3 13.bxc3 Nxe4 14.Bxe7 Qb6 15.Bc4 Nxc3 16.Bc5 Rfe8+ 17.Kf1 Be6 18.Bxb6 Bxc4+ 19.Kg1 Ne2+ 20.Kf1 Nxd4+ 21.Kg1 Ne2+ 22.Kf1 Nc3+ 23.Kg1 axb6 24.Qb4 Ra4 25.Qxb6 Nxd1 26.h3 Rxa2 27.Kh2 Nxf2 28.Re1 Rxe1 29.Qd8+ Bf8 30.Nxe1 Bd5 31.Nf3 Ne4 32.Qb8 b5 33.h4 h5 34.Ne5 Kg7 35.Kg1 Bc5+ 36.Kf1 Ng3+ 37.Ke1 Bb4+ 38.Kd1 Bb3+ 39.Kc1 Ne2+ 40.Kb1 Nc3+ 41.Kc1 Rc2# 0-1

	a	b	c	d	e	f	g	h
8									8
7									7
6									6
5									5
4									4
3									3
2									2
1									1
	a	b	c	d	e	f	g	h

Position after 1.e4 e5 2.Nf3 Nc6 3.Bb5 a6

A game or series of moves is generally written in one of two ways; in two columns, as White/Black pairs, preceded by the move number and a period:

1. e4 e5

2. Nf3 Nc6

3. Bb5 a6

or horizontally:

1. e4 e5 2. Nf3 Nc6 3. Bb5 a6

Moves may be interspersed with commentary, called annotations. When the game score resumes with a Black move, an ellipsis (...) fills the position of the White move, for example:

1. e4 e5 2. Nf3

White attacks the black e-pawn.

2... Nc6

Black defends and develops simultaneously.

3. Bb5

White plays the Ruy Lopez.

3... a6

Black elects Morphy's Defence.

Though not technically a part of algebraic notation, the following are some symbols commonly used by annotators, for example in publications Chess Informant and Encyclopaedia of Chess Openings, to give editorial comment on a move or position.

The symbol chosen is simply appended to the end of the move notation, for example, in the Soller Gambit: 1.d4 e5?! 2.dxe5 f6 3.e4! Nc6 4.Bc4+/−

Descriptive notation was usual in the Middle Ages in Europe. A form of algebraic chess notation that seems to have been borrowed from Muslim chess, however, appeared in Europe in a 12th century manuscript referred to as "MS. Paris Fr. 1173 (PP.)". The files run from a to h, just as they do in the current standard algebraic notation. The ranks, however, are also designated by letters, with the exception of the 8th rank which is distinct because it has no letter. The ranks are lettered in reverse – from the 7th to the 1st: k, l, m, n, o, p, q.^[12]

Another system of notation using only letters appears in a book of Mediaeval chess, Rechenmeister Jacob Köbel's Schachzabel Spiel of 1520.^[12]

Algebraic notation exists in various forms and languages and is based on a system developed by Philipp Stamma in the 1730s. Stamma used the modern names of the squares (and may have been the first to number the ranks), but he used p for pawn moves and the capital original file of a piece (A through H) instead of the initial letter of the piece name as used now.^[13] Piece letters were introduced in the 1780s by Moses Hirschel, and Johann Allgaier with Aaron Alexandre developed the modern castling notation in the 1810s.^[14]

Algebraic notation was described in 1847 by Howard Staunton in his book The Chess-Player's Handbook. Staunton credits the idea to German authors, and in particular to "Alexandre, Jaenisch, and the Handbuch [des Schachspiels]."^[15] While algebraic notation has been used in German and Russian chess literature since the 19th century, the Anglosphere was slow to adopt it, using descriptive notation for much of the 20th century. Beginning in the 1970s, algebraic notation gradually became more common in English language publications, and by 1980 it had become the prevalent notation. In 1981, FIDE stopped recognizing descriptive notation, and algebraic notation became the accepted international standard.

• 
  Chess diagram found in a French manuscript (1173)
• 
  Chess diagram from Jacob Köbel's German book about Mediaeval chess, Schachzabel Spiel (1520)
• 
  Chess diagram showing algebraic notation in Howard Staunton's The Chess-Player's Handbook (1866)

The table contains names for all the pieces as well as the words for chess, check, and checkmate in several languages.^[16] Several languages use the Arabic loanword alfil for the piece called bishop in English; in this context it is a chess-specific term which no longer has its original meaning of "elephant".

• Chess notation
• Chess annotation symbols

The Wikibook Chess has a page on the topic of: Notating The Game

Look up algebraic notation or Appendix:Algebraic notation in Wiktionary, the free dictionary.

• FIDE Laws of Chess (see Appendix C. Algebraic Notation)