ISO 128

ISO 128 is an international standard (ISO), about the general principles of presentation in technical drawings, specifically the graphical representation of objects on technical drawings.[1]

Overview

Since 2003 the ISO 128 standard contains fifteen parts, which were initiated between 1996 and 2003. It starts with a summary of the general rules for the execution and structure of technical drawings. Further it describes basic conventions for lines, views, cuts and sections, and different types of engineering drawings, such as those for mechanical engineering, architecture, civil engineering, and shipbuilding. It is applicable to both manual and computer-based drawings, but it is not applicable to three-dimensional CAD models.[1]

The ISO 128 replaced the previous DIN 6 standard for drawings, projections and views, which was first published in 1922 and updated in 1950 and 1968. ISO 128 itself was first published in 1982, contained 15 pages and "specified the general principles of presentation to be applied to technical drawings following the orthographic projection methods".[2]

[3]

Several parts of this standard have been updated individually. The last parts and the standard as a whole were withdrawn by the ISO in 2001.

A thirteenth part was added in 2013.

Composition of ISO 128

The 7 parts of the ISO 128 standard are:

  • ISO 128-1:2020 Technical product documentation (TPD) — General principles of representation — Part 1: Introduction and fundamental requirements
  • ISO 128-2:2020 Technical product documentation (TPD) — General principles of representation — Part 2: Basic conventions for lines
  • ISO 128-3:2022 Technical product documentation (TPD) — General principles of representation — Part 3: Views, sections and cuts
  • ISO 128-15:2013 Technical product documentation (TPD) — General principles of presentation — Part 15: Presentation of shipbuilding drawings
  • ISO/TS 128-71:2010 Technical product documentation (TPD) — General principles of presentation — Part 71: Simplified representation for mechanical engineering drawings
  • ISO 128-100:2020 Technical product documentation — General principles of representation — Part 100: Index

Withdrawn parts

Replaced by ISO 128-2:2020
  • ISO 128-20:1996 Technical drawings — General principles of presentation — Part 20: Basic conventions for lines
  • ISO 128-21:1997 Technical drawings — General principles of presentation — Part 21: Preparation of lines by CAD systems
  • ISO 128-22:1999 Technical drawings — General principles of presentation — Part 22: Basic conventions and applications for leader lines and reference lines
  • ISO 128-23:1999 Technical drawings — General principles of presentation — Part 23: Lines on construction drawings
  • ISO 128-24:2014 Technical drawings — General principles of presentation — Part 24: Lines on mechanical engineering drawings
  • ISO 128-25:1999 Technical drawings — General principles of presentation — Part 25: Lines on shipbuilding drawings
Replaced by ISO 128-3:2022
  • ISO 128-30:2001 Technical drawings — General principles of presentation — Part 30: Basic conventions for views
  • ISO 128-33:2018 Technical product documentation (TPD) — General principles of presentation — Part 33: Representation of views, sections and cuts in construction drawings
  • ISO 128-34:2001 Technical drawings — General principles of presentation — Part 34: Views on mechanical engineering drawings
  • ISO 128-40:2001 Technical drawings — General principles of presentation — Part 40: Basic conventions for cuts and sections
  • ISO 128-43:2015 Technical product documentation (TPD) — General principles of presentation — Part 43: Projection methods in building drawings
  • ISO 128-44:2001 Technical drawings — General principles of presentation — Part 44: Sections on mechanical engineering drawings
  • ISO 128-50:2001 Technical drawings — General principles of presentation — Part 50: Basic conventions for representing areas on cuts and sections
A size chart illustrating the ISO A series described in ISO 216
  • ISO 129 Technical product documentation (TPD) — Presentation of dimensions and tolerances
    • ISO 129-1:2018 Technical product documentation (TPD) — Presentation of dimensions and tolerances — Part 1: General principles
    • ISO 129-4:2013 Technical product documentation (TPD) — Indication of dimensions and tolerances — Part 4: Dimensioning of shipbuilding drawings
    • ISO 129-5:2018 Technical product documentation — Indication of dimensions and tolerances — Part 5: Dimensioning of structural metal work
  • ISO 216 paper sizes, e.g. the A4 paper size
  • ISO 406:1987 Technical drawings — Tolerancing of linear and angular dimensions
  • ISO 1660:2017 Geometrical product specifications (GPS) — Geometrical tolerancing — Profile tolerancing
  • ISO 2203:1973 Technical drawings — Conventional representation of gears
  • ISO 3040:2016 Geometrical product specifications (GPS) — Dimensioning and tolerancing — Cones
  • ISO 3098-1:1974 Technical Drawing — Lettering — Part I: Currently Used Characters
  • ISO 4172:1991 Technical drawings — Construction drawings — Drawings for the assembly of prefabricated structures
  • ISO 5261:1995 Technical drawings — Simplified representation of bars and profile sections
  • ISO 5455:1979 Technical drawings — Scales
  • ISO 5456 Technical drawings — Projection methods
  • ISO 5457:1999 Technical product documentation — Sizes and layout of drawing sheets
  • ISO 5459:2011 Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
  • ISO 5845-1:1995 Technical drawings — Simplified representation of the assembly of parts with fasteners — Part 1: General principles
  • ISO 6410-1:1993 Technical drawings — Screw threads and threaded parts — Part 1: General conventions
  • ISO 6411:1982 Technical drawings — Simplified representation of centre holes
  • ISO 6412-1:2017 Technical product documentation — Simplified representation of pipelines — Part 1: General rules and orthogonal representation
  • ISO 6413:2018 Technical product documentation — Representation of splines and serrations
  • ISO 6414:2020 Technical product documentation (TPD) — Technical drawings for glassware
  • ISO 6428:1982 Technical drawings — Requirements for microcopying
  • ISO 6433:2012 Technical drawings — Part references
  • ISO 7083:1983 Technical drawings — Symbols for geometrical tolerancing — Proportions and dimensions
  • ISO 7200:2004 Technical product documentation — Data fields in title blocks and document headers
  • ISO 7437:1990 Technical drawings — Construction drawings — General rules for execution of production drawings for prefabricated structural components
  • ISO 7518:1983 Technical drawings — Construction drawings — Simplified representation of demolition and rebuilding
  • ISO 7519:1991 Technical drawings — Construction drawings — General principles of presentation for general arrangement and assembly drawings
  • ISO 8015:2011 Geometrical product specifications (GPS) — Fundamentals — Concepts, principles and rules
  • ISO 8048:1984 Technical drawings — Construction drawings — Representation of views, sections and cuts
  • ISO 8560:2019 Technical drawings — Construction drawings — Representation of modular sizes, lines and grids
  • ISO 8826-1:1989 Technical drawings — Rolling bearings — Part 1: General simplified representation
  • ISO 8826-2:1994 Technical drawings — Rolling bearings — Part 2: Detailed simplified representation
  • ISO 9222-1:1989 Technical drawings — Seals for dynamic application — Part 1: General simplified representation
  • ISO 9222-2:1989 Technical drawings — Seals for dynamic application — Part 2: Detailed simplified representation
  • ISO 9958-1:1992 Draughting media for technical drawings — Draughting film with polyester base — Part 1: Requirements and marking
  • ISO 9961:1992 Draughting media for technical drawings — Natural tracing paper
  • ISO 10209:2012 Technical product documentation — Vocabulary — Terms relating to technical drawings, product definition and related documentation
  • ISO 10579:2010 Geometrical product specifications (GPS) — Dimensioning and tolerancing — Non-rigid parts
  • ISO 13567 is an international Computer-aided design (CAD) layer standard.
  • ISO 13715:2017 Technical product documentation — Edges of undefined shape — Indication and dimensioning
  • ISO 15786:2008 Technical drawings — Simplified representation and dimensioning of holes

See also

References

  1. ^ a b ISO 128-1:2003 Abstract. Accessed 1 March 2009.
  2. ^ ISO 128 techstreet.com, 2009.) Archived 2019-10-17 at the Wayback Machine
  3. ^ ISO 128 (archive.org)

Read other articles:

John Patrick Foley

John Patrick FoleyMahaguru Ordo Equestrian Makam Kudus YerusalemPenunjukan22 Desember 2007Masa jabatan berakhir12 Februari 2011PendahuluCarlo FurnoPenerusEdwin Frederick O'BrienJabatan lainKardinal-Deakon San Sebastiano al PalatinoImamatTahbisan imam19 Mei 1962oleh John KrolTahbisan uskup8 Mei 1984oleh John KrolPelantikan kardinal24 November 2007oleh Benediktus XVIPeringkatKardinal-DeakonInformasi pribadiLahir(1935-11-11)11 November 1935Darby, Pennsylvania, Amerika SerikatWafat11 De...

 

 

Dewan Perwakilan Rakyat Daerah Kabupaten Maros 2024–2029

Halaman ini sedang dipersiapkan dan dikembangkan sehingga mungkin terjadi perubahan besar.Anda dapat membantu dalam penyuntingan halaman ini. Halaman ini terakhir disunting oleh Anhar Karim (Kontrib • Log) 2 hari 277 menit lalu. Jika Anda melihat halaman ini tidak disunting dalam beberapa hari, mohon hapus templat ini. Dewan Perwakilan Rakyat DaerahKabupaten Maros 2024–2029Periode 2024–2029JenisJenisUnikameral dari Dewan Perwakilan Rakyat Daerah Jangka waktu5 tahunSejarahDidirikan4 Juli...

 

 

Hartwall Original Long Drink

Hartwall Original Long DrinkHartwall Original Long Drink.TypeLonkeroCountry of origin FinlandIntroduced1952Alcohol by volume 5.5% (standard), 2.6% (light), 7.5% (strong), alcohol-freeWebsitehttps://web.archive.org/web/20180630000157/http://www.originallongdrink.com/fi/ An earlier version of the Original Long Drink can. Hartwall Original Long Drink (stylised as oriGINal) is a brand of lonkero produced by the Finnish brewery Hartwall. Hartwall first produced lonkero in 1952 when Alko ...

Patrick Cosgrave

Irish journalist and writer, advisor to Margaret Thatcher Patrick CosgraveBornPatrick John Francis Cosgrave(1941-09-28)28 September 1941Dublin, IrelandDied16 September 2001(2001-09-16) (aged 59)London, EnglandNationalityBritishIrishOccupationsJournalistwriter Patrick John Francis Cosgrave[1] (28 September 1941 – 16 September 2001)[1] was a British-Irish journalist and writer. A staunch supporter of the British Conservative Party, he was an adviser to Margaret Thatcher w...

 

 

Skuadron 115 (Israel)

Skadron 115Embelem Red SquadronAktif1954–1958, 1969–1994, 2005–Negara IsraelCabang Angkatan Udara IsraelPeranPenyerangMarkasOvdaJulukanFlying Dragon / Red SquadronPertempuranSuez CrisisPerang AttritionPerang Yom Kippur War1982 Lebanon WarTokohTokoh berjasaGiora RommPesawat tempurPesawat tempurF-16C/D Fighting Falcon Skadron 115, yang juga dikenal dengan nama Flying Dragon atau Red Squadron, adalah skadron pesawat tempur penyerang dari Angkatan Udara Israel (AUI). Skadron ini b...

 

 

جامع سامان

جامع سامان معلومات عامة الموقع شهركرد[1]  القرية أو المدينة سامان، محافظة تشهارمحال وبختياري الدولة  إيران تعديل مصدري - تعديل   جامع سامان هو مسجد تاريخي يعود إلى عصر القاجاريون، ويقع في سامان.[2] مراجع ^ Wiki Loves Monuments monuments database، 2 نوفمبر 2017، QID:Q28563569 ^ Encyclopaedia of th...

United People's Party (Poland)

This article relies largely or entirely on a single source. Relevant discussion may be found on the talk page. Please help improve this article by introducing citations to additional sources.Find sources: United People's Party Poland – news · newspapers · books · scholar · JSTOR (September 2020) Political party in Poland United People's Party Zjednoczone Stronnictwo LudoweFirst leaderJózef NiećkoLast leaderDominik LudwiczakFounded27 November...

 

 

Человек прямоходящий

† Человек прямоходящий Научная классификация Домен:ЭукариотыЦарство:ЖивотныеПодцарство:ЭуметазоиБез ранга:Двусторонне-симметричныеБез ранга:ВторичноротыеТип:ХордовыеПодтип:ПозвоночныеИнфратип:ЧелюстноротыеНадкласс:ЧетвероногиеКлада:АмниотыКлада:Синапсиды�...

 

 

LGBT chemicals conspiracy theory

Anti-LGBT conspiracy theory Gay frogs redirects here. For the actual practice of homosexual behavior among frogs, see List of animals displaying homosexual behavior § Amphibians. Beginning in the 2010s, various media personalities promoted conspiracy theories claiming that exposure to endocrine disrupting chemical pollutants in the water supply are responsible for an alleged increase in the gay or transgender population. These claims are not supported by scientific evidence, and appear ...

Dave Kopel

American journalist Dave KopelBornDavid B. Kopel (1960-01-07) January 7, 1960 (age 64)NationalityAmericanEducationBrown University (BA)University of Michigan Law SchoolOccupations Author attorney gun rights advocate journalist Political partyDemocraticWebsitedavekopel.org David B. Kopel[1] (born January 7, 1960) is an American author, attorney, gun rights advocate, and contributing editor to several publications. As of August 2021, he is research director of the Independence Inst...

 

 

Dharmaśāstra

Genre of Sanskrit theological texts dealing with dharma For the Pali equivalent, see Dhammasattha. Part of a series onHindu scriptures and texts Shruti Smriti List Vedas Rigveda Samaveda Yajurveda Atharvaveda Divisions Samhita Brahmana Aranyaka Upanishads UpanishadsRig vedic Aitareya Kaushitaki Sama vedic Chandogya Kena Yajur vedic Brihadaranyaka Isha Taittiriya Katha Shvetashvatara Maitri Atharva vedic Mundaka Mandukya Prashna Other scriptures Agamas Bhagavad Gita Tantras Related Hindu texts...

 

 

Padjadjaran University

Indonesian university Padjadjaran UniversityUniversitas PadjadjaranSeal of UNPADMottoMenjadi Universitas Unggul Dalam Penyelenggaraan Pendidikan Kelas DuniaMotto in EnglishTowards a Leading University in Providing World Class EducationTypePublicEstablishedSeptember 11, 1957RectorProf. Rina Indiastuti, S.E., M.Si.E., Ph.D.Students32.481 (2018)[1]AddressBandung, West Java, IndonesiaCampusUrban: Dipati Ukur CampusSuburb: Jatinangor CampusColorsNavy Blue  NicknameUNPADAffiliatio...

The Mark of Kri

2002 video gameThe Mark of KriDeveloper(s)San Diego StudioPublisher(s)Sony Computer EntertainmentComposer(s)Jack WallPlatform(s)PlayStation 2ReleaseNA: July 29, 2002EU: March 14, 2003Genre(s)Action-adventureMode(s)Single-player The Mark of Kri is an action-adventure game developed by San Diego Studio and published by Sony Computer Entertainment exclusively for PlayStation 2. The game was followed by Rise of the Kasai, which was released in April 2005. Background With an art team consisting mo...

 

 

Saragozza

Disambiguazione – Se stai cercando altri significati, vedi Saragozza (disambigua). Disambiguazione – Zaragoza rimanda qui. Se stai cercando altri significati, vedi Zaragoza (disambigua). Saragozzacomune(ES) Zaragoza Saragozza – VedutaVeduta della città e dell'Ebro LocalizzazioneStato Spagna Comunità autonoma Aragona Provincia Saragozza AmministrazioneAlcaldeNatalia Chueca (Partito Popolare) dal 17-6-2023 TerritorioCoordinate41°39′25.2″N 0°52′3...

 

 

Fandor

Film streaming service This article contains content that is written like an advertisement. Please help improve it by removing promotional content and inappropriate external links, and by adding encyclopedic content written from a neutral point of view. (September 2022) (Learn how and when to remove this message) FandorCompany typeSubscription independent film streaming serviceFoundedMarch 2011FounderPhilip HopkinsHeadquartersNew York City, New York, United StatesArea servedUnited States, Can...

Gianfranco Vissani

Gianfranco Vissani (Civitella del Lago, 22 novembre 1951) è un cuoco, gastronomo, scrittore e personaggio televisivo italiano. Indice 1 Biografia 1.1 Vita privata 2 Televisione 3 Procedimenti giudiziari 4 Riconoscimenti 4.1 Ristorante Casa Vissani 4.2 Altri premi 5 Opere 6 Note 7 Altri progetti 8 Collegamenti esterni Biografia Ha conseguito la qualifica di aiuto cuoco presso l'istituto professionale alberghiero di Spoleto nel 1967. Non ha frequentato il biennio di specializzazione per conseg...

 

 

聖克里斯多福及尼維斯

此條目可参照英語維基百科相應條目来扩充。 (2020年2月23日)若您熟悉来源语言和主题，请协助参考外语维基百科扩充条目。请勿直接提交机械翻译，也不要翻译不可靠、低品质内容。依版权协议，译文需在编辑摘要注明来源，或于讨论页顶部标记{{Translated page}}标签。 圣基茨和尼维斯联邦Federation of Saint Christopher and Nevis（英語） 国旗 国徽 格言：Country Above Self  (英语)...

 

 

1983 World Championships in Athletics – Men's 800 metres

Men's 800 metres at the 1983 World ChampionshipsVenueHelsinki Olympic StadiumDates7 August (heats)8 August (semi-finals)9 August (final)Competitors60 from 46 nationsWinning time1:43.65 CRMedalists  Willi Wülbeck   West Germany Rob Druppers   Netherlands Joaquim Cruz   Brazil1987 → Events at the1983 World ChampionshipsTrack events100 mmenwomen200 mmenwomen400 mmenwomen800 mmenwomen1500 mmenwomen3000 mwomen5000 m...

Almoravid dynasty

1040–1147 Berber dynasty in west Africa and Iberia Several terms redirect here. For other uses, see Murabitun (disambiguation). Almoravid dynastyالمرابطون (Arabic) Al-Murābiṭūn1050s–1147The Almoravid empire at its greatest extentStatusEmpire Nominal vassal of the Abbasid Caliphate[1][2] Capital Azougui[3][4][5][6] Aghmat (1058–c. 1070)[7] Marrakesh (c. 1070–1147) Official languagesArabic[8][9 ...

 

 

Macintosh Quadra 700

Cet article est une ébauche concernant Apple et l’informatique. Vous pouvez partager vos connaissances en l’améliorant (comment ?) selon les recommandations des projets correspondants. Macintosh Quadra 700Développeur AppleFamille MacintoshDate de sortie 21 octobre 1991Date de retrait 15 mars 1993CaractéristiquesProcesseur Motorola 68040Macintosh IIciMacintosh Centris 650modifier - modifier le code - modifier Wikidata Le Macintosh Quadra 700 fut le premier Macintosh de la série ...