Georges Martin was a French engineer who joined Matra at the end of 1966 at the invitation of Philippe Guédon, a former colleague of his at Simca.[7]Jean-Luc Lagardère, Matra's CEO, informed Martin that his first project would be to design an engine for the new F1 rules with a specific output target of 150 horsepower per litre.[8][9][7] Lagardère had already determined that the new engine would be a V12.[7]
Work on the Matra Sports V12 began in 1967. The project was underwritten by a loan of six million francs from the French government (approximately US$1,200,000), and, after Lagardère met with Jean Prada, head what became the French oil company Elf Aquitaine in April of 1967, an additional two million francs (US$400,000).[10][11][12][13]
Development took place in Matra's base in Vélizy-Villacoublay.[4] Leading the effort were Martin and his colleague Georges Chariatte.[10][14] René Fortin was responsible for testing and development.[7]
Martin quietly negotiated an agreement with British Racing Motors (BRM) for the British firm to design a considerable portion of the engine, including the camshafts, cam drives, and tappets, among other items, while Martin and his team would design the cylinder heads and combustion chamber shapes. This arrangement fell apart after Sir Alfred Owen, Chairman of Rubery Owen and head of BRM, disclosed BRM's involvement in designing the engine for the new "all French" F1 car at a British motor industry dinner. BRM's contract was cancelled, and Matra continued work with French engineering firm and engine specialist Moteur Moderne.[15][12][3]
Moteur Moderne was contracted to produce three prototype engines.[16][17][12] The cylinder blocks for the prototype engines were made of aluminum, while the production block, and possibly the cylinder heads, were to be of magnesium.[4][18] Production of the first test engine took only seven months, and the V12 was first fired up on a test bench on 19 December 1967.[10]
Matra planned to unveil a V12-powered road car in 1971.[19] A later model MS81 V12 was installed in an extensively modified Matra Murena by the factory.[20][21]
Beginning in the 1972 season, the Commission Sportive Internationale (CSI) amended the rules for sports prototypes by combining the previous Group 5 and Group 6 classes into a single new Group 5 class with no minimum production requirement and a maximum displacement limit of 3.0-litres, eliminating the 5.0-litre cars that had raced in earlier seasons, and opening a new competition venue for the Matra V12.[2]
Common features
All members of the Matra Sports V12 family are water-cooled, four-stroke V12 engines with an included angle of 60° between cylinder banks. All engines in the family also have the same bore × stroke dimensions of 79.7 mm × 50 mm (3.14 in × 1.97 in), and total displacement of 2,993 cc (182.6 cu in). The block and cylinder heads are of light alloy. The block uses wet liners in the cylinder bores.[3] The crankshaft has six throws and seven main bearings, and is machined from a solid billet. The engine has two overhead camshafts per cylinder bank driven by a straight-cut geartrain, and four valves per cylinder.[4]
Over the life of the engine family, outputs for individual versions ranged from 395–520 hp (295–388 kW; 400–527 PS), and 198–253 lb⋅ft (268–343 N⋅m) of torque.[3]
Variants
MS9
Matra Sports MS9 V12
The MS9 was the first model of the Matra Sports V12 to race. Its intake ports are placed between the camshafts on each cylinder head, so that the intake trumpet above each port angled outward on an assembled engine. Some models also had a "pipe organ" exhaust system consisting of a trio of long straight pipes running down each side of the engine.
The included angle between the valves is 56°, raising the height of the combustion chamber and requiring a high dome on the piston to achieve the desired compression ratio.[3]
Unlike the Cosworth DFV, the MS9 was not designed to be a load-bearing part of the car's structure.[3]
The MS9 produced 395 PS (291 kW) at 10,500 rpm.[22] It was presented to motoring journalists on 11 January 1968 at Vélizy-Villacoublay.[23]
The MS12 engine was the result of a significant redesign of Matra's V12 engine. A single-cylinder test engine was built by Moteur Moderne to experiment with combustion chamber design. When the data from the test engine were applied to the V12, it resulted in an included angle of 33½° degrees between intake and exhaust valves. Valve diameters in early engines were 31 mm for intakes and 27 mm for exhausts, while on later motors these dimensions increased to 33 mm and 27.2 mm.[3] The intake ports were moved to the side of the cylinder head, indicated by two rows of six trumpets that are mounted vertically in the vee of the cylinder block.
The oil scavenge and pressure pumps for the dry sump system were moved from their position below the crankshaft in the MS9, to the front of the crankcase below the water pump. This had the benefit of reducing the height of the engine assembly.[3] The same 120° steel crankshaft was used as on the MS9, but there was less free space around it in the MS12, to reduce windage losses. Connecting rods were 116 mm long titanium parts, with 44 mm big ends. The pistons are flat-topped, fully-skirted forged aluminum parts.
The MS12 was designed to handle suspension loads fed into a strengthened sump and new structural members bolted to the sides of the top of each cylinder heads.[7][3] The block and heads were both castings of AS9KG aluminum alloy. The heads were attached by 14 studs, with an additional 6 cap screws threaded from the block into the head on the outboard, exhaust side.[3]
The first generation MS12 developed 435 PS (320 kW) at 11,000 rpm, and was ready for the 1970 racing season.[22]
The MS78 was the Ligier F1 team's engine for two models in 1978. Power output is 520 PS (382 kW) at 12,300 rpm.[22]
Applications:
Ligier JS7
Ligier JS9
MS81
The MS81 engine was used by a different F1 Ligier model in 1981–1982. It was also installed in a prototype road car. In racing trim it developed 520 PS (382 kW) at 13,000 rpm.[22] It was detuned for the road car application.
Note: 1Valid for the 1973 Sports Prototype Championship, at the end of which Matra will be the overall winner 2Valid for the 1974 Sports Prototype Championship, at the end of which Matra will be the overall winner
Proposed replacements
MS71 flat 12
In 1971 Matra Sports developed a 3.0-litre flat-twelve engine for their MS120B F1 car.[4] A prototype with an aluminium crankcase is part of the engine display at the Matra Museum in Romorantin-Lanthenay.
MS82 V6
Work began on a new turbocharged F1 engine at the end of the 1980 season.[27] Martin left the choice of the engine's configuration up to the customer bankrolling the project.[7]
In the end the configuration chosen was a V6 with a 120° bank angle. Bore × stroke were 80 mm × 49.6 mm (3.1 in × 2.0 in), for a total displacement of 1,496 cc (91.3 cu in). The engine weighed 144 kg (317 lb). A power output of 650 PS (480 kW) was observed during a test run in 1982, with outputs of up to 805 PS (592 kW) predicted in the future. At the end of that year, Matra owner Peugeot declined to finance further development, and their chief client, the Ligier F1 team, opted to buy Renault engines instead."[28]
Replica/continuation engines
After becoming established as a rebuilder of original Matra Sports MS76 engines, the Nicholson-McLaren company was commissioned to produce a run of ten reproduction engines. A set of complete drawings for the engine block, cylinder heads, crankshafts, and all anciliaries was created based on original blueprints, scans of original components, and reverse-engineering of original Matra parts.[29][30]
Rosinski, José (1 December 1997). Matra — la saga, 1965-1982 (in French). ETAI. ISBN978-2726883013.
Delaroche, Frédéric (1 January 1982). MATRA la puissance et la gloire [MATRA the power and the glory] (in French). Jacques Grancher. ISBN978-2733900338.
.jpg)
