The BL 8-inch howitzer Mark I through to Mark V (1 to 5)[note 1] were a British improvisation developed early in the First World War to provide heavy artillery. It used shortened and bored-out barrels from various redundant naval 6-inch guns.
It bore no relation to the later 8-inch howitzer of the First World War, the Vickers 8-inch Mark VI to VIII howitzers which succeeded it.
History
The weapon entered service in February 1915.
The Mark I–V had many relatively minor differences in the carriages and trails and Mk IV, Mk VI and QF Mk II 6-inch naval gun barrels were used.[note 2] However, the ballistic characteristics, propellant charges and shells used were similar for all Mks I–V. They are easily identified by their short thick barrel and twin recoil buffers above the barrel.
Mks I–IV were no longer repaired from summer 1917 onwards.[7]
Mks I–V were limited by a short range and high weight, being 4–5 tons heavier than the succeeding Mk VI which was designed as a howitzer and hence had a much lighter barrel.
The improvised nature of the design led to failures such as premature explosion and unreliability in action, and difficulties of maintenance in workshops. There were also early quality-control problems with British mass production of ammunition in 1915 and early 1916 : "the 8-inch fuses failed so often that the battlefield was littered with unexploded 8-inch shells".[8]
Despite their shortcomings they were generally considered a success :
"They were monstrous things and extremely heavy, but the machinery of the guns was very simple and that's why they did so extremely well and didn't give nearly as much trouble as some of the more complicated guns that came to appear later on. One was the very first to be made and it was marked, 'Eight-inch Howitzer No. 1 Mark I' so we called that gun, 'The Original'. It was marvellously accurate". Second Lieutenant Montague Cleeve, 36th Siege Artillery Battery, Royal Garrison Artillery.[9]
They remained in use on the Western Front throughout the First World War as Britain's need for heavy artillery increased and was never fully met by production of modern equipment.
Photo gallery
Changing a barrel, which occurred frequently. Battle of Polygon Wood, September 26, 1917
^I.e. models 1 through 5. Britain used Roman numerals to designate "Marks" or versions of guns until after World War II. Hence this article describes the first five models of British BL 8-inch howitzer.
^Mk I used barrels from BLC guns Mk I/IV; Mk II & III used barrels from BL Mk IV or VI; Mk IV used BLC Mk I/VI adapted for Mk IV carriage; Mk V used QF Mk II barrels converted to BL (total of 63). Details from Clarke 2005, page 34, and Tony DiGiulian's website Britain 6"/40 (15.2 cm) QF Marks I, II and III
References
^Clarke, page 34. Major Wilkinson suggested the use of bored-out and shortened 6-inch (152 mm) naval gun barrels.
^Hogg & Thurston 1972, Page 152. 5 tons is a rounded average for weight of gun with breech. Details: How Mk I 5 ton 6 cwt; Mk II 4 ton 19 3/4 cwt; Mk III 5 ton 2 1/4 cwt; Mk IV 5 ton 6 cwt;Mk V 5 ton 1 cwt
^Hogg & Thurston 1972, Page 152. 13.5 tons is a rounded average for total weight of gun and carriage. Carriage averaged 8 ton 8 cwt. Weights for the carriages with gun : Carriage Mk I with Mk I how : 13 ton 13 cwt; Carriage Mk II with how : 13 ton 11 cwt; Carriage Mk III with how 13 ton 3 cwt; Carriage Mk IV with how 13 ton 3 cwt; Carriage Mk V with how 13 ton 5 cwt
^Hogg & Thurston 1972, Page 153. Carriage Mk I 18-inch; Mk II, Mk 5 13-inch; Mk III, Mk IV 13.25-inch
General Sir Martin Farndale, History of the Royal Regiment of Artillery. Western Front 1914–18. London: Royal Artillery Institution, 1986 ISBN1-870114-00-0
I.V. Hogg & L.F. Thurston, "British Artillery Weapons & Ammunition 1914–1918". London: Ian Allan, 1972.
_(14595378490).jpg)
