Manufacturing engineering is the field of engineering that designs and optimizes the manufacturing process, or the steps through which raw materials are transformed into a final product. The manufacturing process begins with the product design, and materials specification. These materials are then modified through manufacturing to become the desired product.
Contemporary manufacturing encompasses all intermediary stages involved in producing and integrating components of a product. Some industries, such as semiconductor and steel manufacturers, use the term fabrication instead.[2]
The manufacturing sector is closely connected with the engineering and industrial design industries.
Etymology
The Modern English word manufacture is likely derived from the Middle Frenchmanufacture ("process of making") which itself originates from the Classical Latinmanū ("hand") and Middle French facture ("making"). Alternatively, the English word may have been independently formed from the earlier English manufacture ("made by human hands") and fracture.[3] Its earliest usage in the English language was recorded in the mid-16th century to refer to the making of products by hand.[4][5]
Human ancestors manufactured objects using stone and other tools long before the emergence of Homo sapiens about 200,000 years ago.[6] The earliest methods of stone tool making, known as the Oldowan "industry", date back to at least 2.3 million years ago,[7] with the earliest direct evidence of tool usage found in Ethiopia within the Great Rift Valley, dating back to 2.5 million years ago.[8] To manufacture a stone tool, a "core" of hard stone with specific flaking properties (such as flint) was struck with a hammerstone. This flaking produced sharp edges that could be used as tools, primarily in the form of choppers or scrapers.[9] These tools greatly aided the early humans in their hunter-gatherer lifestyle to form other tools out of softer materials such as bone and wood.[10] The Middle Paleolithic, approximately 300,000 years ago, saw the introduction of the prepared-core technique, where multiple blades could be rapidly formed from a single core stone.[9]Pressure flaking, in which a wood, bone, or antler punch could be used to shape a stone very finely was developed during the Upper Paleolithic, beginning approximately 40,000 years ago.[11] During the Neolithic period, polished stone tools were manufactured from a variety of hard rocks such as flint, jade, jadeite, and greenstone. The polished axes were used alongside other stone tools including projectiles, knives, and scrapers, as well as tools manufactured from organic materials such as wood, bone, and antler.[12]
Copper smelting is believed to have originated when the technology of pottery kiln allowed sufficiently high temperatures.[13] The concentration of various elements such as arsenic increase with depth in copper ore deposits and smelting of these ores yields arsenical bronze, which can be sufficiently work-hardened to be suitable for manufacturing tools.[13]Bronze is an alloy of copper with tin; the latter of which being found in relatively few deposits globally delayed true tin bronze becoming widespread. During the Bronze Age, bronze was a major improvement over stone as a material for making tools, both because of its mechanical properties like strength and ductility and because it could be cast in molds to make intricately shaped objects. Bronze significantly advanced shipbuilding technology with better tools and bronze nails, which replaced the old method of attaching boards of the hull with cord woven through drilled holes.[14] The Iron Age is conventionally defined by the widespread manufacturing of weapons and tools using iron and steel rather than bronze.[15] Iron smelting is more difficult than tin and copper smelting because smelted iron requires hot-working and can be melted only in specially designed furnaces. The place and time for the discovery of iron smelting is not known, partly because of the difficulty of distinguishing metal extracted from nickel-containing ores from hot-worked meteoritic iron.[16]
During the growth of the ancient civilizations, many ancient technologies resulted from advances in manufacturing. Several of the six classic simple machines were invented in Mesopotamia.[17] Mesopotamians have been credited with the invention of the wheel. The wheel and axle mechanism first appeared with the potter's wheel, invented in Mesopotamia (modern Iraq) during the 5th millennium BC.[18] Egyptian paper made from papyrus, as well as pottery, were mass-produced and exported throughout the Mediterranean basin. Early construction techniques used by the Ancient Egyptians made use of bricks composed mainly of clay, sand, silt, and other minerals.[19]
Medieval and early modern
A stocking frame at Ruddington Framework Knitters' Museum in Ruddington, England
The Middle Ages witnessed new inventions, innovations in the ways of managing traditional means of production, and economic growth. Papermaking, a 2nd-century Chinese technology, was carried to the Middle East when a group of Chinese papermakers were captured in the 8th century.[20] Papermaking technology was spread to Europe by the Umayyad conquest of Hispania.[21] A paper mill was established in Sicily in the 12th century. In Europe the fiber to make pulp for making paper was obtained from linen and cotton rags. Lynn Townsend White Jr. credited the spinning wheel with increasing the supply of rags, which led to cheap paper, which was a factor in the development of printing.[22] Due to the casting of cannon, the blast furnace came into widespread use in France in the mid 15th century. The blast furnace had been used in China since the 4th century BC.[13] The stocking frame, which was invented in 1598, increased a knitter's number of knots per minute from 100 to 1000.[23]
An 1835 illustration of a Roberts Loom weaving shed
The Industrial Revolution was the transition to new manufacturing processes in Europe and the United States from 1760 to the 1830s.[24] This transition included going from hand production methods to machines, new chemical manufacturing and iron production processes, the increasing use of steam power and water power, the development of machine tools and the rise of the mechanizedfactory system. The Industrial Revolution also led to an unprecedented rise in the rate of population growth. Textiles were the dominant industry of the Industrial Revolution in terms of employment, value of output and capital invested. The textile industry was also the first to use modern production methods.[25]: 40 Rapid industrialization first began in Britain, starting with mechanized spinning in the 1780s,[26] with high rates of growth in steam power and iron production occurring after 1800. Mechanized textile production spread from Great Britain to continental Europe and the United States in the early 19th century, with important centres of textiles, iron and coal emerging in Belgium and the United States and later textiles in France.[25]
An economic recession occurred from the late 1830s to the early 1840s when the adoption of the Industrial Revolution's early innovations, such as mechanized spinning and weaving, slowed down and their markets matured. Innovations developed late in the period, such as the increasing adoption of locomotives, steamboats and steamships, hot blast iron smelting and new technologies, such as the electrical telegraph, were widely introduced in the 1840s and 1850s, were not powerful enough to drive high rates of growth. Rapid economic growth began to occur after 1870, springing from a new group of innovations in what has been called the Second Industrial Revolution. These innovations included new steel making processes, mass-production, assembly lines, electrical grid systems, the large-scale manufacture of machine tools and the use of increasingly advanced machinery in steam-powered factories.[25][27][28][29]
Building on improvements in vacuum pumps and materials research, incandescent light bulbs became practical for general use in the late 1870s. This invention had a profound effect on the workplace because factories could now have second and third shift workers.[30] Shoe production was mechanized during the mid 19th century.[31] Mass production of sewing machines and agricultural machinery such as reapers occurred in the mid to late 19th century.[32] The mass production of bicycles started in the 1880s.[32] Steam-powered factories became widespread, although the conversion from water power to steam occurred in England earlier than in the U.S.[33]
Electrification of factories, which had begun gradually in the 1890s after the introduction of the practical DC motor and the AC motor, was fastest between 1900 and 1930. This was aided by the establishment of electric utilities with central stations and the lowering of electricity prices from 1914 to 1917.[34]Electric motors allowed more flexibility in manufacturing and required less maintenance than line shafts and belts. Many factories witnessed a 30% increase in output owing to the increasing shift to electric motors. Electrification enabled modern mass production, and the biggest impact of early mass production was in the manufacturing of everyday items, such as at the Ball BrothersGlass Manufacturing Company, which electrified its mason jar plant in Muncie, Indiana, U.S. around 1900. The new automated process used glass blowing machines to replace 210 craftsman glass blowers and helpers. A small electric truck was now used to handle 150 dozen bottles at a time whereas previously used hand trucks could only carry 6 dozen bottles at a time. Electric mixers replaced men with shovels handling sand and other ingredients that were fed into the glass furnace. An electric overhead crane replaced 36 day laborers for moving heavy loads across the factory.[35]
Mass production was popularized in the late 1910s and 1920s by Henry Ford's Ford Motor Company,[32] which introduced electric motors to the then-well-known technique of chain or sequential production. Ford also bought or designed and built special purpose machine tools and fixtures such as multiple spindle drill presses that could drill every hole on one side of an engine block in one operation and a multiple head milling machine that could simultaneously machine 15 engine blocks held on a single fixture. All of these machine tools were arranged systematically in the production flow and some had special carriages for rolling heavy items into machining positions. Production of the Ford Model T used 32,000 machine tools.[36]
Lean manufacturing, also known as just-in-time manufacturing, was developed in Japan in the 1930s. It is a production method aimed primarily at reducing times within the production system as well as response times from suppliers and to customers.[37][38] It was introduced in Australia in the 1950s by the British Motor Corporation (Australia) at its Victoria Park plant in Sydney, from where the idea later migrated to Toyota.[39] News spread to western countries from Japan in 1977 in two English-language articles: one referred to the methodology as the "Ohno system", after Taiichi Ohno, who was instrumental in its development within Toyota.[40] The other article, by Toyota authors in an international journal, provided additional details.[41] Finally, those and other publicity were translated into implementations, beginning in 1980 and then quickly multiplying throughout the industry in the United States and other countries.[42]
Manufacturing strategy
According to a "traditional" view of manufacturing strategy, there are five key dimensions along which the performance of manufacturing can be assessed: cost, quality, dependability, flexibility and innovation.[43]
In regard to manufacturing performance, Wickham Skinner, who has been called "the father of manufacturing strategy",[44] adopted the concept of "focus",[45] with an implication that a business cannot perform at the highest level along all five dimensions and must therefore select one or two competitive priorities. This view led to the theory of "trade offs" in manufacturing strategy.[46] Similarly, Elizabeth Haas wrote in 1987 about the delivery of value in manufacturing for customers in terms of "lower prices, greater service responsiveness or higher quality".[47] The theory of "trade offs" has subsequently being debated and questioned,[46] but Skinner wrote in 1992 that at that time "enthusiasm for the concepts of 'manufacturing strategy' [had] been higher", noting that in academic papers, executive courses and case studies, levels of interest were "bursting out all over".[48]
Manufacturing writer Terry Hill has commented that manufacturing is often seen as a less "strategic" business activity than functions such as marketing and finance, and that manufacturing managers have "come late" to business strategy-making discussions, where, as a result, they make only a reactive contribution.[49][50]
Emerging technologies have offered new growth methods in advanced manufacturing employment opportunities, for example in the Manufacturing Belt in the United States. Manufacturing provides important material support for national infrastructure and also for national defense.
On the other hand, most manufacturing processes may involve significant social and environmental costs. The clean-up costs of hazardous waste, for example, may outweigh the benefits of a product that creates it. Hazardous materials may expose workers to health risks. These costs are now well known and there is effort to address them by improving efficiency, reducing waste, using industrial symbiosis, and eliminating harmful chemicals.
The negative costs of manufacturing can also be addressed legally. Developed countries regulate manufacturing activity with labor laws and environmental laws. Across the globe, manufacturers can be subject to regulations and pollution taxes to offset the environmental costs of manufacturing activities. Labor unions and craft guilds have played a historic role in the negotiation of worker rights and wages. Environment laws and labor protections that are available in developed nations may not be available in the third world. Tort law and product liability impose additional costs on manufacturing. These are significant dynamics in the ongoing process, occurring over the last few decades, of manufacture-based industries relocating operations to "developing-world" economies where the costs of production are significantly lower than in "developed-world" economies.[51]
Finance
From a financial perspective, the goal of the manufacturing industry is mainly to achieve cost benefits per unit produced, which in turn leads to cost reductions in product prices for the market towards end customers.[52][unreliable source?] This relative cost reduction towards the market, is how manufacturing firms secure their profit margins.[53]
Capacity use in manufacturing in Germany and the United States
Surveys and analyses of trends and issues in manufacturing and investment around the world focus on such things as:
The nature and sources of the considerable variations that occur cross-nationally in levels of manufacturing and wider industrial-economic growth;
Competitiveness; and
Attractiveness to foreign direct investors.
In addition to general overviews, researchers have examined the features and factors affecting particular key aspects of manufacturing development. They have compared production and investment in a range of Western and non-Western countries and presented case studies of growth and performance in important individual industries and market-economic sectors.[57][58]
On June 26, 2009, Jeff Immelt, the CEO of General Electric, called for the United States to increase its manufacturing base employment to 20% of the workforce, commenting that the U.S. has outsourced too much in some areas and can no longer rely on the financial sector and consumer spending to drive demand.[59] Further, while U.S. manufacturing performs well compared to the rest of the U.S. economy, research shows that it performs poorly compared to manufacturing in other high-wage countries.[60] A total of 3.2 million – one in six U.S. manufacturing jobs – have disappeared between 2000 and 2007.[61] In the UK, EEF the manufacturers organisation has led calls for the UK economy to be rebalanced to rely less on financial services and has actively promoted the manufacturing agenda.
UNIDO also publishes a Competitive Industrial Performance (CIP) Index, which measures the competitive manufacturing ability of different nations. The CIP Index combines a nation's gross manufacturing output with other factors like high-tech capability and the nation's impact on the world economy. Germany topped the 2020 CIP Index, followed by China, South Korea, the United States, and Japan.[64][65]
In 2023, the manufacturing industry in the United States accounted for 10.70% of the total national output, employing 8.41% of the workforce. The total value of manufacturing output reached $2.5 trillion.[66][67] In 2023, Germany's manufacturing output reached $844.93 billion, marking a 12.25% increase from 2022. The sector employed approximately 5.5 million people, accounting for around 20.8% of the workforce.[68]
List of countries by manufacturing output
These are the top 50 countries by total value of manufacturing output in U.S. dollars for its noted year according to World Bank:[69]
^Srivatsan, T. S.; Manigandan, K.; Sudarshan, T. S. (2018). "Use of Conventional Manufacturing Techniques for Materials". In Srivatsan, T. S.; Sudarshan, T. S.; Manigandan, K. (eds.). Manufacturing Techniques for Materials: Engineering and Engineered. Boca Raton: CRC Press. pp. 436–437. ISBN978-1138099265.
^Youssef, Helmi A.; El-Hofy, Hassan (2008). Machining Technology: Machine Tools and Operations. Boca Raton: CRC Press. p. 1. ISBN978-1420043396.
^Tóth, Zsuzsanna (2012). "The First Neolithic Sites in Central/South-East European Transect, Volume III: The Körös Culture in Eastern Hungary". In Anders, Alexandra; Siklósi, Zsuzsanna (eds.). Bone, Antler, and Tusk tools of the Early Neolithic Körös Culture. Oxford: BAR International Series 2334.
^Photos, E. (1989). "The Question of Meteoritic versus Smelted Nickel-Rich Iron: Archaeological Evidence and Experimental Results". World Archaeology. 20 (3): 403–421. doi:10.1080/00438243.1989.9980081. JSTOR124562. S2CID5908149.
^Moorey, Peter Roger Stuart (1999). Ancient Mesopotamian Materials and Industries: The Archaeological Evidence. Eisenbrauns. ISBN978-1575060422.
^Potts, D. T. (2012). A Companion to the Archaeology of the Ancient Near East. p. 285.
^Rosen, William (2012). The Most Powerful Idea in the World: A Story of Steam, Industry and Invention. University Of Chicago Press. p. 237. ISBN978-0-226-72634-2.
^Hunter, Louis C. (1985). A History of Industrial Power in the United States, 1730–1930, Vol. 2: Steam Power. Charlottesville: University Press of Virginia. p. 18.
^Nye, David E. (1990). Electrifying America: Social Meanings of a New Technology. Cambridge, Massachusetts, United States and London, England: The MIT Press.
^Hunter, Louis C. (1985). A History of Industrial Power in the United States, 1730–1930, Vol. 2: Steam Power. Charlottesville: University Press of Virginia.
^Jerome, Harry (1934). Mechanization in Industry, National Bureau of Economic Research. p. xxviii.
^Nye, David E. (1990). Electrifying America: Social Meanings of a New Technology. Cambridge, Massachusetts and London, England: MIT Press. pp. 14, 15.
^Haas, E. A., "Breakthrough Manaufacturing", Harvard Business Review, March/April 1987, pp. 75–81
^Skinner, W., "Missing the Links in Manufacturing Strategy" in Voss, C. A. (ed) (1992), Manufacturing Strategy – Process and Content, Chapman and Hall, pp. 12–25
^"Manufacturing Program". Centres for Disease Control and Prevention. February 11, 2019. Archived from the original on April 3, 2019. Retrieved March 14, 2019.
1997 video game 1997 video gameDarkstalkers 3Arcade flyerDeveloper(s)CapcomPublisher(s)CapcomVirgin Interactive Entertainment (PAL)Producer(s)Tetsuya IijimaDesigner(s)Shinichiro ObataHidetoshi IshizawaKatsuyuki KanetakaComposer(s)Takayuki IwaiMasato KoudaSeriesDarkstalkersPlatform(s)Arcade, PlayStation, Sega SaturnReleaseArcade JP: May 1997NA: 1997 Sega Saturn JP: April 16, 1998 PlayStation JP: November 5, 1998PAL: November 18, 1998NA: November 30, 1998Genre(s)FightingMode(s)Single-playermult...
Lee Grant Informasi pribadiNama lengkap Lee Anderson Grant[1]Tanggal lahir 27 Januari 1983 (umur 41)[2]Tempat lahir Hemel Hempstead, EnglandTinggi 193 cm (6 ft 4 in)[3]Posisi bermain KiperInformasi klubKlub saat ini Manchester UnitedNomor 13Karier junior1998–2000 WatfordKarier senior*Tahun Tim Tampil (Gol)2000–2007 Derby County 74 (0)2005–2006 → Burnley (pinjaman) 1 (0)2006 → Oldham Athletic (pinjaman) 16 (0)2007–2010 Sheffield Wednesda...
American football player (born 1990) American football player Adam ThielenThielen with the Vikings in 2017No. 19 – Carolina PanthersPosition:Wide receiverPersonal informationBorn: (1990-08-22) August 22, 1990 (age 33)Detroit Lakes, Minnesota, U.S.Height:6 ft 2 in (1.88 m)Weight:195 lb (88 kg)Career informationHigh school:Detroit LakesCollege:Minnesota State (2008–2012)Undrafted:2013Career history Minnesota Vikings (2013–2022) Carolina Panthers (2023–prese...
Water-polo aux Jeux olympiques d'été de 1924 Généralités Sport Water-polo Éditions 6e Lieu(x) Paris Participants ? équipes Épreuves 1 Palmarès Tenant du titre Grande-Bretagne Vainqueur France Deuxième Belgique Troisième États-Unis Navigation Anvers 1920 Amsterdam 1928 modifier L'équipe de France de water-polo, championne olympique en 1924. Résultats du tournoi olympique masculin de Water polo aux Jeux olympiques d'été de 1924 à Paris. Podiums Or A...
Questa voce sull'argomento centri abitati del Mato Grosso è solo un abbozzo. Contribuisci a migliorarla secondo le convenzioni di Wikipedia. Várzea Grandecomune Várzea Grande – Veduta LocalizzazioneStato Brasile Stato federato Mato Grosso MesoregioneCentro-Sul Mato-Grossense MicroregioneCuiabá AmministrazioneSindacoLucimar Sacre de Campos (Democratici) TerritorioCoordinate15°38′59″S 56°07′52″W / 15.649722°S 56.131111°W-15.649722; -56.131111...
Title of the wife of the president of Namibia First Lady of NamibiaIncumbentSustjie Mbumbasince February 4, 2024Inaugural holderKovambo NujomaFormationMarch 21, 1990 First Lady of Namibia[1] is the title of the wife of the president of Namibia. There have been three first ladies (and presidents) since Namibia's independence in 1990. Namibia currently does not have any first lady since February 4, 2024. After President Hage Geingob dies. First ladies of Namibia No. Portrait Name(...
Feodor IIITsar Seluruh RusiaBerkuasa8 Februari (29 Januari O.S.) 1676 – 7 Mei 1682Koronasi18 Juni 1676PendahuluAlekseyPenerusPyotr I dan Ivan VInformasi pribadiKelahiran(1661-06-09)9 Juni 1661MoskwaKematian7 Mei 1682(1682-05-07) (umur 20)MoskwaPemakamanKatedral ArchangelWangsaDinasti RomanovNama lengkapFyodor Alekseyevich RomanovAyahAlekseyIbuMaria Ilyinichna MiloslavskayaPasanganAgaphia Simeonovna Gruszewska Marfa Matveievna ApraksinaAnakTsarevich Ilya FyodorovichAgamaOrtodoks Timur F...
Trinidad-born journalist and activist (1915–1964) Claudia JonesBornClaudia Vera Cumberbatch(1915-02-21)21 February 1915Belmont, Port of Spain, Trinidad and TobagoDied24 December 1964(1964-12-24) (aged 49)London, EnglandResting placeHighgate CemeteryNationalityTrinidadianOther namesClaudia Cumberbatch JonesOccupation(s)Journalist, activistYears active1936–1964Known forOrganiser of 1959 Caribbean carnival event, precursor of the Notting Hill Carnival.Founder of West Indi...
For the 1934 American film, see She Was a Lady (film). She Was a Ladyalso Angels of Doomalso The Saint Meets His Match First editionAuthorLeslie CharterisCountryUnited KingdomLanguageEnglishSeriesThe SaintGenreMystery novelPublisherHodder and StoughtonPublication date1931Media typePrint (Hardback & Paperback)Preceded byAlias the Saint (UK)Wanted for Murder (US) Followed byThe Holy Terror She Was a Lady is the title of a mystery novel by Leslie Charteris featuring...
City in North Dakota, United StatesWesthope, North DakotaCityLocation of Westhope, North DakotaCoordinates: 48°54′40″N 101°01′04″W / 48.91111°N 101.01778°W / 48.91111; -101.01778CountryUnited StatesStateNorth DakotaCountyBottineauFounded1903Government • MayorRussell BallantyneArea[1] • Total0.32 sq mi (0.84 km2) • Land0.32 sq mi (0.84 km2) • Water0.00 sq mi (0.0...
Le proteste in Palestina del 2011 sono state una serie di proteste in seno all'Autorità Nazionale Palestinese (ANP) e Hamas nella Striscia di Gaza, messo in scena da diversi gruppi palestinesi come parte della più ampia primavera araba. Le proteste erano dirette al governo palestinese, oltre a sostenere le rivolte popolari in Tunisia, Egitto e Siria. Il fine delle proteste era unificare i due principali partiti Fatah e Hamas. Altre ragioni erano la disoccupazione, l'inflazione e la mancanza...
Albizzate komune di Italia Albizzate (it) Tempat Negara berdaulatItaliaRegion di ItaliaLombardyProvinsi di ItaliaProvinsi Varese NegaraItalia Ibu kotaAlbizzate PendudukTotal5.155 (2023 )Bahasa resmiItalia GeografiLuas wilayah3,88 km² [convert: unit tak dikenal]Ketinggian334 m Berbatasan denganCaronno Varesino Castronno Jerago con Orago Solbiate Arno Sumirago Besnate SejarahSanto pelindungAleksander dari Bergamo Informasi tambahanKode pos21041 Zona waktuUTC+1 UTC+2 Kode telepon0331...
No debe confundirse con Lago Mármara o Región del Mármara. Mar de Mármara Marmara denizi - Μαρμαρα̃ Θάλασσα - Προποντίδα Océano o mar de la IHO (n.º id.: 29) Vista del mar de Mármara.Ubicación geográficaContinente Europa - AsiaOcéano Mar MediterráneoCoordenadas 40°45′N 28°00′E / 40.75, 28Ubicación administrativaPaís Turquía TurquíaDivisión Región del MármaraSubdivisión Provincias de Canakkale, Balikesir, Bursa, Yalova, Koc...
穆罕默德·达乌德汗سردار محمد داود خان 阿富汗共和國第1任總統任期1973年7月17日—1978年4月28日前任穆罕默德·查希爾·沙阿（阿富汗國王）继任穆罕默德·塔拉基（阿富汗民主共和國革命委員會主席團主席） 阿富汗王國首相任期1953年9月7日—1963年3月10日君主穆罕默德·查希爾·沙阿 个人资料出生(1909-07-18)1909年7月18日 阿富汗王國喀布尔逝世1978年4月28日(...
Battle of the Hungarian War of Independence of 1848–1849 This article may require copy editing for grammar, style, cohesion, tone, or spelling. You can assist by editing it. (September 2023) (Learn how and when to remove this message) Battle of Hetény-Kurtakeszi-IzsaPart of the Hungarian Revolution of 1848Date10 September 1849Locationnear Hetény, Kurtakeszi (part of today Marcelová) and Izsa Kingdom of Hungary, today part of SlovakiaResult Hungarian victoryBelligerents Hungarian Re...
Northern Irish politician For other people named William Craig, see William Craig (disambiguation). William CraigLeader of the Vanguard Unionist Progressive PartyIn officeFebruary 1972 – February 1978Member of Parliamentfor Belfast EastIn office28 February 1974 – 7 April 1979Preceded byStanley McMasterSucceeded byPeter Robinson Personal detailsBorn(1924-12-02)2 December 1924Cookstown, Northern IrelandDied25 April 2011(2011-04-25) (aged 86)Bangor, Northern IrelandNat...
Rise in sea levels due to climate change This article is about the current and projected rise in the world's average sea level. For sea level rise in general, see Past sea level. Rising seas redirects here. For the song, see Rising Seas (song). The global average sea level has risen about 250 millimetres (9.8 in) since 1880.[1] Sea surface height change from 1992 to 2019 – NASA The visualization is based on data collected from the TOPEX/Poseidon, Jason-1, Jason-2, and Jason-3 s...
Abdul Aziz Ali Wafa Anggota Konstituante Republik IndonesiaMasa jabatan9 November 1956 – 5 Juli 1959PresidenSoekarno Informasi pribadiLahir1 Januari 1900Pamekasan, Jawa TimurMeninggal1962(umur 62)Partai politik MasyumiSunting kotak info • L • B Abdul Aziz Ali Wafa (lahir 1 Januari 1900 – 1962) adalah seorang politikus, pendiri, pengasuh pesantren Bustanul Ulum, ketua KNI, dan penjaga keamanan daerah asal Indonesia.[1] Ia merupakan anggota partai Masyumi dan ...
2018 Chinese television drama This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.Find sources: Accidentally in Love TV series – news · newspapers · books · scholar · JSTOR (November 2021) (Learn how and when to remove this message) Accidentally in LoveGenreRomantic-comedyDirected byZhong QingStarringGuo Jun ChenSun Yi N...
.jpg)
.jpg)
