The M101A1 (previously designated Howitzer M2A2 on Carriage M2A2) howitzer is an artillery piece developed and used by the United States. It was the standard U.S. light field howitzer in World War II and saw action in both the European and Pacific theaters and during the Korean War. Entering production in 1941, it quickly gained a reputation for accuracy and a powerful punch. The M101A1 fires 105 mmhigh explosive (HE) semi-fixed ammunition and has a range of 12,330 yards (11,270 m), making it suitable for supporting infantry.
History
Development and designation
After World War I, the U.S. Army Ordnance Department studied various captured German 105 mm-caliber howitzers and developed the 105 mm Howitzer M1920 by using the Carriage M1920. A box trail carriage design (the M1925E carriage) and two other split trail designs (the T1 and T2) were also developed, but the original split trail design was found superior after testing. After being selected, the piece was standardized in December 1927, as the 105 mm howitzer M1 on carriage M1. The Army had an intention to replace all 75 mm gun-howitzers in its divisional and non-divisional field artillery regiments with 105 mm pieces, but a lack of appropriations stalled the idea and eventually forced it to be completely abandoned by 1929; a limited plan developed in 1925 envisioned re-equipping three regiments, but by 1933, only 14 M1 howitzers had been manufactured.
A modified version of the M1 was trialed in 1932 which used semi-fixed ammunition instead of separate-loading ammunition. Since this development required a different breech block, the new piece was designated the 105 mm howitzer M2 on carriage M1. 48 pieces were manufactured in 1939. The original M1 carriage had been designed for towing using horses rather than trucks, and a new carriage, the T5 (M2), was developed in 1939 and standardized in February 1940. The breech ring of the howitzer M2 was modified in March 1940 before large-scale production began, creating the 105 mm howitzer M2A1 on carriage M2.[1]
In 1939, the new howitzer cost $25,000, which was three times more than a 75 mm field gun M1897 on M2 carriage, and its adoption required procurement of a colossal amount of new ammunition (War Department estimate of $26 million).[2]
The gun was designed to be very durable and was therefore heavy for its caliber,[3] but studies after 1943 found that after prolonged firing, the muzzle end of the barrel was prone to cracking. To relieve stress in the barrel, new production M2A1 tubes were counterbored two inches from the muzzle starting in the late 1940s. By the end of World War II, 8,536 105 mm towed howitzers had been built and post-war production continued at Rock Island Arsenal until 1953, by which time 10,202 had been built.
In 1953, the new howitzer M2A2 was standardized to further increase the life of the howitzer at the cost of some muzzle velocity. The M2A2's barrel had a higher strength breech ring, deeper rifling grooves, and shallower rifling taper than the M2A1's barrel, resulting in a 50 percent more effective full charge barrel life than the M2A1.[4]
A further developed howitzer M2A2E2, featuring a muzzle brake and maximal range increased along with the propelling charge,[5] on carriage M2A2E2, featuring an increased maximal angle of fire,[6] were designed and tested in 1958, but with the coming XM102 howitzer both were canceled in 1961.
In November 1960, U.S. military artillery designation system began to change, where howitzer M2A1 or M2A2 on carriage M2A1 were renamed the M101 and howitzer M2A1 or M2A2 on carriage M2A2 were renamed the M101A1. This howitzer continued to see service through the Vietnam War. Though the successor M102 howitzer was adopted in 1964, both M101 and M102 shared similar roles in battle and the M101A1 was never fully replaced in front-line service until the adoption of the M119 howitzer. Today, the M101A1 has been retired by the U.S. military, though it continues to see service with many other countries.
Australia
The M2A2 howitzer was retired from regular service with the Australian Army in 1988, when it was replaced by the 105 mm L118 and L119,[7] which in turn were replaced by the M777A2 in 2014.[8] The M2A2 remained in service with the Australian Army Reserve until its replacement by 81-millimetre (3.2 in) mortars in the late 2000s.[9]Australia's Federation Guard retains six pieces for ceremonial use.[10]
Canada
The Canadian Forces procured at least 60 US made M2A1 howitzers, beginning in 1952, and also had Sorel Industries of Canada produce 232 of a slightly modified M2A2 version, starting in 1955. The Canadian produced guns were later designated C1, while the US produced guns were designated C2. These continued in service until the early 2000s. In the late 1990s, ninety-six C1 guns were selected and sent to RDM in the Netherlands to extend their service life. These guns were re-designated as the C3. The changes include a longer 33-calibre barrel, a muzzle brake, reinforced trails and the removal of shield flaps. It remains the standard light howitzer of Canadian Forces Reserve units. The C3 is used by 1RCHA in Glacier National Park in British Columbia as a means of avalanchecontrol. The C3 is used to train Regular Force Artillery in Shilo MB. The modified 105mm C3 howitzer has a range of 18km.[11]
The German Army adopted the M101 howitzer in a modified form in March 1956, designated Feldhaubitze 105 mm M1A2 (Bw).[16] Using components made by Rheinmetall, the new howitzers had a longer, un-counterbored 27-caliber barrel, a large single-baffle muzzle brake, and a larger gun shield.
In the early 1970s, the ROK Armed Forces needed to replace these old howitzers due to the maintenance burden. To match North Korea's artillery capability, South Korea invested in the domestic arms industry to equip its large military cost efficiently. After completion of Project Thunder I, supported by the U.S. Department of Defense, for infantry weapons, in April 1972, the South Korean president Park Chung Hee ordered Project Thunder II for artillery weapons. The U.S. refused to cooperate due to the then diplomatic overtures to the People's Republic of China. The U.S. Embassy in South Korea ordered its technical team to withdraw, believing that South Korea lacked the tooling and knowledge to develop the weapons by itself. The Agency for Defense Development however, reverse engineered the M2A1 (M101A1), and prototype production began in March 1973.[18][19]
On 25 June 1973, three prototypes were demonstrated publicly. After the test, the U.S. ambassador Philip Habib arranged the meeting of South Korean chief secretary O Won-cheol and colonel Montgomery from the Joint U.S. Military Affairs Group-Korea. The colonel provided technical review of the howitzer, and recommended purchasing of the U.S. equipment for logistics issues because the howitzer was not compatible with the U.S. standard. South Korea refused and pursued domestic design, but the two nations eventually signed an agreement for technology transfer in September 1973. It was the first weapons research cooperation between the two nations, and the South Korean defense industry began to form with guidance from the U.S.[18][19]
In February 1974, hostilities grew after North Korea sunk a South Korean fishing boat and kidnapped fishermen near Baengnyeong Island. As a response, 10 howitzers crafted prior to the research cooperation were sent to the island, but pulled out after having severe malfunctions during operations. In November 1975, the reinforced variant experienced barrel breakdown; the failure led to the invitation of American engineers in January 1976 for an overview. After 1.5 months of inspection, the engineers suggested the Eighth United States Army replace South Korean copy with the original M101A1 design. The U.S. then provided its technical data package to South Korea, which quickly readied mass production of the howitzer before the year ended. Production began in 1977 as KM101A1 by Kia Machine Tool (now Hyundai Wia) in Changwon.[20][21]
In 1978, South Korea restarted domestic howitzer program based on M101A1. The howitzer applied 38 calibers barrel for extending the maximum range to 18 km using RAP ammunition. Only 18 howitzers saw service with South Korean military in favor of mass-producing KH179 155 mm towed howitzer.[21]
As of 2021, South Korea is the largest operator of the M101 howitzer with about 2,000 pieces in active service. It is planned to convert 1/3 of its inventory to K105A1 self-propelled howitzer.[22]
Vietnam
France and the State of Vietnam used M2A1 howitzers during the First Indochina War, as did the Viet Minh guerilla forces they fought against, who were supplied with at least 24 by the People's Republic of China, along with other captured American artillery pieces and mortars formerly operated by both Nationalist Chinese forces (the Kuomintang military) and US troops fighting in Korea.[citation needed] Today upgraded M2A1 howitzers (some of which have been mounted on trucks and employed as self-propelled artillery) are still being used by the People's Army of Vietnam (the PAVN).[23]
Other uses
In addition, the M101 has found a second use in the U.S. as an avalanche control gun, supervised by the US Forest Service and the US Army TACOM's cooperative effort in the Avalanche Artillery Users of North America Committee (AAUNAC). The M101 is used by a number of ski areas and state departments of transportation for long-range control work. Under the designation of M2A2, the 2nd Battalion, 2nd Field Artillery Regiment, 428th Field Artillery Brigade performs salutes with 7 guns with World War II Medal of Honor recipient names on their barrels.[24]
M2A2 (1953) – deeper rifling and shorter rifling taper.
M2A2E2 (1958) – prototype with muzzle brake.
M3 – lightweight howitzer, with barrel shortened by 27 inches (69 cm) with carriage of M116 howitzer.
T8 – prototype vehicle-mounted variant with modified breech and with cylindrical recoil surface, standardized as 105 mm M4 howitzer in September, 1943.[27]
FH M1A2 – Rheinmetall-modified M101 in German service.
M101 – post-1961 designation of M2A1 or M2A2 on carriage M2A1.
M101A1 – post-1961 designation of M2A1 or M2A2 on carriage M2A2.
M2A1 – modernized L33 variant by Yugoimport SDPR with max range of 15 km (9.3 mi)/18.1 km (11.2 mi) (boat tail shell/base bleed shell)[28]
C3 – Canadian C1 (M2A1) with lengthened, 33-caliber barrel
M2A2E2 – prototype with increased elevation to 70 degrees.
XM124 & XM124E1 light auxiliary propelled howitzer – prototype (1962–1965) – produced by Sundstrand Aviation Corporation, who added an auxiliary drive system for local maneuverability (See also similar XM123 Medium Auxiliary Propelled 155 mm Howitzer with similar configuration). The base XM124 provided two 20 horsepower (15 kW), air-cooled engines, while the XM124E1 provided a single 20 horsepower (15 kW) engine and electric steering.
M2A2 Terra Star auxiliary propelled howitzer – prototype (1969–1977) – Lockheed Aircraft Service Company added an auxiliary drive system and a tri-star wheel system to the carriage of an M2A2 105 mm light howitzer to provide local maneuverability. The last surviving example is at the Rock Island Arsenal Museum.
Canadian soldiers fire a high explosive round with a C3 howitzer in 2009.
Royal Thai army M101 with new barrel.
XM124E2 light auxiliary-propelled 105 mm howitzer at the Rock Island Arsenal museum
The only surviving prototype M2A2 Terra Star auxiliary propelled howitzer at the Rock Island Arsenal Museum. Note the tri-star wheel system and auxiliary drive system on the right trail leg.
Vietnamese M101 howitzer mounted on an Ural-375D 6×6 truck.[36]
Ammunition
The gun fired semi-fixed ammunition, with 105 mm Cartridge Case M14. The propelling charge consisted of a base charge and six incremental charges, forming seven charges from 1 (the smallest) to 7 (the largest). Use of M1 HE rounds prepared for the 105 mm howitzer M3 (same projectile and cartridge, but different propelling charge) was authorized.[37]
HEAT M67 Shell was originally designed as fixed round, with Cartridge Case M14 type II. It was later changed to semi-fixed type with the standard cartridge, but with non-adjustable propelling charge. For blank ammunition, a shorter Cartridge Case M15 with black powder charge was used.[37]
^Toohill, MAJ Ian (August 2009). "Mortars for Reserve Gunners"(PDF). The Bayonet. 2nd Division, Army Reserves Public Affairs. p. 10. Archived from the original(PDF) on 27 February 2012. Retrieved 6 January 2012.
^Hammerich, Helmut R., ed. (2006). Das Heer 1950 bis 1970: Konzeption, Organisation, Aufstellung. Sicherheitspolitik und Streitkräfte der Bundesrepublik Deutschland. München: R. Oldenbourg. p. 750. ISBN978-3-486-57974-1.
^ abcdefghijWiener, Friedrich (1987). The armies of the NATO nations: Organization, concept of war, weapons and equipment. Truppendienst Handbooks Volume 3. Vienna: Herold Publishers. pp. 494–495.