Lockheed Martin X-44 MANTA

"Lockheed Martin X-44" redirects here. For the UAV, see Lockheed Martin X-44 (UAV).
"MANTA" redirects here. For other uses, see Manta.
X-44 MANTA
NASA concept art of the X-44 in flight
General information
TypeExperimental tailless aircraft
National originUnited States
ManufacturerLockheed Martin
StatusProposed design, canceled
History
Developed fromLockheed Martin F-22 Raptor

The Lockheed Martin X-44 MANTA (Multi-Axis No-Tail Aircraft) was an American conceptual aircraft design by Lockheed Martin that has been studied by NASA and the U.S. Air Force. It was intended to test the feasibility of full yaw, pitch and roll authority without tailplanes (horizontal or vertical). Attitude control would rely purely on 3D thrust vectoring.[1] The aircraft design was derived from the F-22 Raptor and featured a stretched delta wing without tail surfaces.[1]

History

Artist's impression of the X-44

NASA and the U.S. Air Force had begun preliminary work on the aircraft by May 1999. Plans called for MANTA technologies to be demonstrated on either an F-22 Raptor or F-15. An X-44 prototype would begin test flights by fiscal year 2007. NASA planners stated that developing technologies for the X-44 could have application to the F-22 and Joint Strike Fighter programs and commercial supersonic ventures.[2]

Initial feasibility work was funded by government and two contractors.[2] NASA approved the program to start in June 1999, giving the aircraft the designation "X-44A".[3] Funding for the X-44 ended in 2000.[4] Some of the subsequent FB-22 proposals had considered having no tailplanes and would have continued the research from the MANTA program.[5]

Design and development

Planning documents called for an aircraft that "leapfrogs state-of-the-art." The X-44 was designed by Lockheed Martin to demonstrate the feasibility of an aircraft controlled by vectored thrust alone. The X-44 design had a reduced radar signature (due to lack of tail and vertical stabilizers) and was made more efficient by eliminating the tail and rudder surfaces, and instead using thrust vectors to provide yaw, pitch and roll control.[1]

The X-44 MANTA design was based on the F-22. The engine and fuselage would be carried over to the X-44. Major differences included the delta wing shape and tail-less design. Plans called for the elimination of flight control surfaces. Yaw, pitch and roll authority would be accomplished through thrust-vectoring, possibly by modifying the extant 2-D vectoring nozzles of the F-22. These changes would in effect be combining the control and propulsion systems.[2] The X-44 MANTA would have a greater fuel capacity than the F-22, due to its larger delta wing design. The MANTA was designed to have reduced mechanical complexity, increased fuel efficiency and greater agility.[1]

See also

Related development

References

Citations

  1. ^ a b c d Jenkins, Dennis R.; Tony Landis; Jay Miller (June 2003). "SP-2003-4531: American X-Vehicles: An Inventory, X-1 to X-50" (PDF). Monographs in Aerospace History, No. 31. NASA. p. 54. Archived (PDF) from the original on 2020-04-25. Retrieved 2007-10-07.
  2. ^ a b c Dupont, Daniel G. (1999). "X-44 MANTA promises to 'leapfrog state-of-the-art': NASA, USAF, F-22 Makers Begin 'Revolutionary' Tailless Aircraft Studies". Inside the Pentagon. Inside Washington Publishers. pp. 1–17. JSTOR 43995403. Retrieved 15 December 2023.
  3. ^ Dupont, Daniel G. (1999). "F-22A deemed an X-series aerospace vehicle: AIR FORCE, NASA APPROVE START OF X-44A 'TAILLESS' AIRCRAFT STUDIES". Inside the Air Force. Inside Washington Publishers. pp. 1–21. JSTOR 43967782. Retrieved 15 December 2023.
  4. ^ "X-Planes Explained". NASAExplores.com, 9 October 2003.
  5. ^ Miller 2005, pp. 76–77.

Bibliography