Kinzua Bridge
The bridge before its collapse
Coordinates	41°45′40″N 78°35′19″W / 41.76111°N 78.58861°W / 41.76111; -78.58861
Crossed	Kinzua Creek
Locale	McKean, Pennsylvania, United States
Other name(s)	Kinzua Viaduct
Named for	Kinzua, Seneca for "fish on a spear"
Maintained by	Pennsylvania Department of Conservation and Natural Resources
Characteristics
Design	Railroad bridge
Total length	2,052 ft (625 m)[1]
Width	10 ft (3.0 m)
Height	301 ft (92 m)[1]
History
Constructed by	Elmira Bridge Company
Built	1882 (1882)
Collapsed	July 21, 2003 (2003-07-21)
U.S. National Register of Historic Places
NRHP reference No.	77001511
Added to NRHP	August 29, 1977
Location

The Kinzua Bridge or the Kinzua Viaduct (/ˈkɪnzuː/,^[2] /-zuːə/) was a railroad trestle that spanned Kinzua Creek in McKean County in the U.S. state of Pennsylvania. The bridge was 301 feet (92 m) tall and 2,052 feet (625 m) long. Most of its structure collapsed during a tornado in July 2003.

Billed as the "Eighth Wonder of the World", the wrought iron original 1882 structure held the record for the tallest railroad bridge in the world for two years. In 1900, the bridge was dismantled and simultaneously rebuilt out of steel to allow it to accommodate heavier trains. It stayed in commercial service until 1959, when it was sold to a salvage company. In 1963 the Commonwealth of Pennsylvania purchased the bridge as the centerpiece of a state park.

Restoration of the bridge began in 2002, but before it was finished a tornado struck the bridge in 2003, causing a large portion of the bridge to collapse. Corroded anchor bolts holding the bridge to its foundations failed, contributing to the collapse.

Before its collapse, the Kinzua Bridge was ranked as the fourth-tallest railway bridge in the United States.^[3] It was listed on the National Register of Historic Places in 1977 and as a National Historic Civil Engineering Landmark by the American Society of Civil Engineers in 1982. The ruins of the Kinzua Bridge are in Kinzua Bridge State Park off U.S. Route 6 near the borough of Mount Jewett, Pennsylvania.

In 1882, Thomas L. Kane, president of the New York, Lake Erie and Western Railway (NYLE&W), was faced with the challenge of building a branch line off the main line in Pennsylvania, from Bradford south to the coalfields in Elk County.^[4][5] The fastest way to do so was to build a bridge across the Kinzua Valley. The only other alternative would have been to lay an additional 8 miles (13 km) of track over rough terrain.^[6] When built, the bridge was larger than any ever attempted and over twice as large as the largest similar structure at the time, the Portage Bridge over the Genesee River in western New York.^[7]

The first Kinzua Bridge was built by a crew of 40 from 1,552 short tons (1,408 t) of wrought iron in just 94 working days, between May 10 and August 29, 1882.^[1][8][9] The reason for the short construction time was that scaffolding was not used in the bridge's construction; instead a gin pole was used to build the first tower, then a traveling crane was built atop it and used in building the second tower.^[8][10] The process was then repeated across all 20 towers.^[4]

The bridge was designed by the engineer Octave Chanute and was built by the Phoenix Iron Works, which specialized in producing patented, hollow iron tubes called "Phoenix columns".^[4] Because of the design of these columns, it was often mistakenly believed that the bridge had been built out of wooden poles.^[10] The bridge's 110 sandstone masonry piers were quarried from the hillside used for the foundation of the bridge.^[1][4] The tallest tower had a base that was 193 feet (59 m) wide.^[1] The bridge was designed to support a load of 266 short tons (241 t),^[5] and was estimated to cost between $167,000 and $275,000.^[8][11][12]

On completion, the bridge was the tallest railroad bridge in the world and was advertised as the "Eighth Wonder of the World".^[3][10] Six of the bridge's 20 towers were taller than the Brooklyn Bridge.^[1] Excursion trains from as far away as Buffalo, New York, and Pittsburgh would come just to cross the Kinzua Bridge,^[10] which held the height record until the Garabit viaduct, 401 feet (122 m) tall, was completed in France in 1884.^[13] Trains crossing the bridge were restricted to a speed of 5 miles per hour (8.0 km/h) because the locomotive, and sometimes the wind, caused the bridge to vibrate.^[10] People sometimes visited the bridge in hopes of finding the loot of a bank robber, who supposedly hid $40,000 in gold and currency under or near it.^[4][10]

By 1893, the NYLE&W had gone bankrupt and was merged with the Erie Railroad, which became the owner of the bridge.^[13] By the start of the 20th century, locomotives were almost 85 percent heavier and the iron bridge could no longer safely carry trains.^[1] The last traffic crossed the old bridge on May 14, 1900, and removal of the old iron began on May 24.

The new bridge was designed by C.R. Grimm and was built by the Elmira Bridge Company out of 3,358 short tons (3,046 t) of steel, at a cost of $275,000.^[14] Construction began on May 26, starting from both ends of the old bridge. A crew of between 100 and 150 worked 10-hour days for almost four months to complete the new steel frame. Two Howe truss "timber travelers", each 180 feet (50 m) long and 16 feet (5 m) deep, were used to build the towers.^[15] Each "traveler" was supported by a pair of the original wrought-iron towers, separated by the one that was to be replaced. After the middle tower was demolished and a new steel one built in its place, the traveler was moved down the line by one tower and the process was repeated. Construction of each new tower and the spans adjoining it took one week to complete.^[15] The bolts used to hold the towers to the anchor blocks were reused from the first bridge, which would eventually play a major role in the bridge's demise.^[16] Grimm, the designer of the bridge, later admitted that the bolts should have been replaced.^[17]

The Kinzua Viaduct reopened to traffic on September 25, 1900. The new bridge was able to safely accommodate Erie's heavy 2-8-2 Mikados. The Erie Railroad maintained a station at the Kinzua Viaduct. Constructed between 1911 and 1916,^[18] the station was not manned by an agent.^[19] The station was closed sometime between 1923 and 1927.^[20][21]

Train crews would sometimes play a trick on a brakeman on his first journey on the line. When the train was a short distance from the bridge, the crew would send the brakeman over the rooftops of the cars to check on a small supposed problem. As the train crossed the bridge, the rookie "suddenly found himself terrified, staring down three hundred feet (90 m) from the roof of a rocking boxcar".^[13] Even after being reconstructed, the bridge still had a speed limit of 5 miles per hour (8 km/h). As the bridge aged, heavy trains pulled by two steam locomotives had to stop so the engines could cross the bridge one at a time. Diesel locomotives were lighter and did not face that limit; the last steam locomotive for commercial service crossed on October 5, 1950.^[13]

The Erie Railroad obtained trackage rights on the nearby Baltimore and Ohio Railroad (B&O) line in the late 1950s, allowing it to bypass the aging Kinzua Bridge. Regular commercial service ended on June 21, 1959, and the Erie sold the bridge to the Kovalchick Salvage Company of Indiana, Pennsylvania, for $76,000.^[14] The bridge was reopened for one day in October 1959 when a wreck on the B&O line forced trains to be rerouted across it.^[13] According to the American Society of Civil Engineers, the Kinzua Bridge "was a critical structure in facilitating the transport of coal from Northwestern Pennsylvania to the Eastern Great Lakes region, and is credited with causing an increase in coal mining that led to significant economic growth."^[1]

Nick Kovalchick, head of the Kovalchick Salvage Company, which then owned the bridge, was reluctant to dismantle it. On seeing it for the first time he is supposed to have said "There will never be another bridge like this."^[22] Kovalchick worked with local groups who wanted to save the structure, and Pennsylvania Governor William Scranton signed a bill into law on August 12, 1963, to purchase the bridge and nearby land for $50,000 and create Kinzua Bridge State Park.^[14][23] The deed for the park's 316 acres (128 ha) was recorded on January 20, 1965, and the park was opened to the public in 1970.^[23]

An access road to the park was built in 1974, and new facilities there included a parking lot, drinking water and toilets, and installation of a fence on the bridge deck.^[23] On July 5, 1975, there was an official ribbon cutting ceremony for the park, which "was and is unique in the park system" since "its centerpiece is a man-made structure".^[22] The bridge was listed on the National Register of Historic Places on August 29, 1977,^[24] and was named to the National Register of Historic Civil Engineering Landmarks by the American Society of Civil Engineers on June 26, 1982.^[23]

The Knox and Kane Railroad (KKRR) operated sightseeing trips from Kane through the Allegheny National Forest and over the Kinzua Bridge from 1987 until the bridge was closed in 2002.^[25] In 1988 it operated the longest steam train excursion in the United States, a 97-mile (156 km) round trip to the bridge from the village of Marienville in Forest County, with a stop in Kane. The New York Times described being on the bridge as "more akin to ballooning than railroading" and noted "You stare straight out with nothing between you and an immense sea of verdure a hundred yards [91 m] below."^[26] The railroad still operated excursions through the forest and stopped at the bridge's western approach until October 2004.^[25]

As of 2009, Kinzua Bridge State Park is a 329-acre (133 ha) Pennsylvania state park surrounding the bridge and the Kinzua Valley. The park is located off of U.S. Route 6 north of Mount Jewett in Hamlin and Keating Townships. A scenic overlook within the park allows views of the fallen bridge and of the valley, and is also a prime location to view the fall foliage in mid-October.^[27] The park has a shaded picnic area with a centrally-located modern restroom.^[6] Before the bridge's collapse, visitors were allowed on or under the bridge and hiking was allowed in the valley around the bridge.^[6] In September 2002 the bridge was closed even to pedestrian traffic.^[9] About 100 acres (40 ha) of Kinzua Bridge State Park are open to hunting. Common game species are turkey, bear and deer.^[6]

Since 2002, the Kinzua Bridge had been closed to all "recreational pedestrian and railroad usage" after it was determined that the structure was at risk to high winds.^[6] Engineers had determined that during high winds, the bridge's center of gravity could shift, putting weight onto only one side of the bridge and causing it to fail.^[6] An Ohio-based bridge construction and repair company had started work on restoring the Kinzua Bridge in February 2003.^[6]

On July 21, 2003, construction workers had packed up and were starting to leave for the day when a storm arrived.^[28] A tornado spawned by the storm struck the Kinzua Bridge, snapping and uprooting nearby trees, as well as causing 11 of the 20 bridge towers to collapse. There were no deaths or injuries. The tornado was produced by a mesoscale convective system (MCS), a complex of strong thunderstorms, that had formed over an area that included eastern Ohio, western Pennsylvania, western New York, and southern Ontario.^[29] The MCS traveled east at around 40 miles per hour (60 km/h). As the MCS crossed northwestern Pennsylvania, it formed into a distinctive comma shape. The northern portion of the MCS contained a long-lived mesocyclone, a thunderstorm with a rotating updraft that is often conducive to tornados.^[30]

At approximately 15:20 EDT (19:20 UTC), the tornado touched down in Kinzua Bridge State Park, 1 mile (1.6 km) from the Kinzua Bridge. The tornado, classified as F1 on the Fujita scale, passed by the bridge and continued another 2.5 miles (4 km) before it lifted. It touched down again 2 miles (3 km) from Smethport and traveled another 3 miles (4.8 km) before finally dissipating. It was estimated to have been 1⁄3-mile (540 m) wide and it left a path 3.5 miles (5.6 km) long.^[31] The same storm also spawned an F3 tornado in nearby Potter County.^[32]

When the tornado touched down, the winds had increased to at least 94 miles per hour (151 km/h) and were coming from the east, perpendicular to the bridge, which ran north–south. An investigation determined that Towers 10 and 11 had collapsed first, in a westerly direction.^[33] Meanwhile, Towers 12 through 14 had actually been picked up off their foundations, moved slightly to the northwest and set back down intact and upright, held together by only the railroad tracks on the bridge. Next, towers four through nine collapsed to the west, twisting clockwise, as the tornado started to move northward.^[33] As it moved north, inflow winds came in from the south and caused Towers 12, 13, and 14 to finally collapse towards the north, twisting counterclockwise.^[33]

The failures were caused by the badly-rusted iron base bolts holding the bases of the towers to concrete anchor blocks embedded into the ground.^[6] An investigation determined that the tornado had a wind speed of at least 94 miles per hour (151 km/h), which applied an estimated 90 short tons-force (800 kN) of lateral force against the bridge.^[34] The investigation also hypothesized that the whole structure oscillated laterally four to five times before fatigue started to cause the base bolts to fail. The towers fell intact in sections and suffered damage upon impact with the ground.^[35] The century-old bridge was destroyed in less than 30 seconds.^[36]

Panorama of Kinzua Gorge, in June 2011, from the south

The state decided not to rebuild the Kinzua Bridge, which would have cost an estimated $45 million. Instead, it was proposed that the ruins be used as a visitor attraction to show the forces of nature at work.^[36] Kinzua Bridge State Park had attracted 215,000 visitors annually before the bridge collapsed,^[37] and was chosen by the Pennsylvania Bureau of Parks for its list of "Twenty Must-See Pennsylvania State Parks".^[38] The viaduct and its collapse were featured in the History Channel's Life After People as an example of how corrosion and high winds would eventually lead to the collapse of any steel structure.^[39] The bridge was removed from the National Register of Historic Places on July 21, 2004.^[40]

The Knox and Kane Railroad was forced to suspend operations in October 2006 after a 75 percent decline in the number of passengers, possibly brought about by the collapse of the Kinzua Bridge.^[41] The Kovalchick Corporation bought the Knox and Kane's tracks and all other property owned by the railroad, including the locomotives and rolling stock. The Kovalchick Corporation also owns the East Broad Top Railroad and was the company that owned the Kinzua Bridge before selling it to the state in 1963.^[41] The company disclosed plans in 2008 to remove the tracks and sell them for scrap. The right-of-way would then be used to establish a rail trail.^[41]

The state of Pennsylvania reimagined the Kinzua State Park as one anchored by a "sky walk" viewing platform and network of hiking trails. It released $700,000 to design repairs on the remaining towers and plan development of the new park facilities in June 2005.^[42] In late 2005, the Pennsylvania Department of Conservation and Natural Resources (DCNR) put forward an $8 million proposal for a new observation deck and visitors' center, with plans to allow access to the bridge and a hiking trail giving views of the fallen towers.^[36] The Kinzua Sky Walk was opened on September 15, 2011, in a ribbon-cutting ceremony.^[43] The Sky Walk consists of a pedestrian walkway to an observation deck with a glass floor at the end of the bridge that allows views of the bridge and the valley directly below. The walkway cost $4.3 million to construct, but in 2011 a local tourism expert estimated it could eventually bring in $11.5 million of tourism revenue each year.^[44]

• List of bridges documented by the Historic American Engineering Record in Pennsylvania
• List of Erie Railroad structures documented by the Historic American Engineering Record
• National Register of Historic Places listings in McKean County, Pennsylvania
• Tornadoes of 2003

Sources

• Leech, Thomas G; McHaugh, Jonathan D; Dicarlantonio, George (November 2005). "Lessons from the Kinzua". Civil Engineering. 75 (11). American Society of Civil Engineers: 56–61. ISSN 0885-7024.
• Packard, Vance (January 25, 1977). "Kinzua Viaduct" (PDF). National Register of Historic Places Inventory—Nomination Form. National Park Service. Retrieved December 13, 2013.

Wikimedia Commons has media related to Kinzua Bridge.

• Kinzua Railway Viaduct Historic Civil landmark at the American Society of Civil Engineers site
• "Collapse at Kinzua" Archived June 11, 2011, at the Wayback Machine (Open University)
• Historic American Engineering Record (HAER) No. PA-7, "Erie Railway, Bradford Division, Bridge 27.66 (Kinzua Viaduct)"
• "Report on the July 21st Collapse of the Kinzua Viaduct". Archived from the original on April 26, 2012. Retrieved October 4, 2007.