HMCS Edmonton in June 2017
Class overview
Name	Kingston class
Builders	Halifax Shipyards Ltd., Halifax, Nova Scotia
Operators	Royal Canadian Navy
Preceded by	Anticosti class
Built	1994–1998
In commission	21 September 1996–present
Completed	12
Active	12
General characteristics
Type	Coastal defence vessel
Displacement	970 t (950 long tons)
Length	55.31 m (181 ft 6 in) oa 49 m (160 ft 9 in) pp
Beam	11.3 m (37 ft 1 in)
Draught	3.42 m (11 ft 3 in)
Propulsion	2 × Jeumont DC electric motors 4 × 600 VAC Wärtsilä UD 23V12 diesel engines 2 × Z drive azimuth thrusters
Speed	15 knots (28 km/h; 17 mph)
Range	5,000 nmi (9,300 km; 5,800 mi)
Complement	47 max
Sensors and processing systems	Kelvin Hughes Nucleus S-band surface search radar Towed high-frequency sidescan sonar Remote-control Mine Hunting System (RMHS) Magnetic degaussing system
Armament	1 × Bofors 40 mm L/60 Mk 5C cannon (removed 2014) 1 x Nanuk RCWS 12.7 mm heavy machine gun (trial) 2 × M2 machine guns
Aircraft carried	AeroVironment RQ-20 Puma UAS

The Kingston class consists of 12 coastal defence vessels operated by the Royal Canadian Navy. The class is the name for the Maritime Coastal Defence Vessel Project (MCDV). These multi-role vessels were built and launched from the mid- to late-1990s and are crewed by a combination of Naval Reserve and Regular Force personnel. The main missions of the vessels are reservist training, coastal patrol, minesweeping, law enforcement, pollution surveillance and search and rescue. The multi-purpose nature of the vessels led to their mixed construction between commercial and naval standards. The Kingston class is split between the east and west coasts of Canada and regularly deploy overseas to West Africa, Europe, Central America and the Caribbean.

In August 2023 it was reported that the Canadian Department of National Defence had "initiated the project to inform timely governmental decision-making about a potential replacement for the Kingston-class."^[1]

The Kingston class was the result of the Maritime Coastal Defence Vessel Project (MCDV) in the late 1980s. The project came about due to four influences, along with restrictions. The vessels in use by the Canadian Forces Naval Reserve were ageing and needed replacement. At the time, the Maritime Command was using old Mackenzie-class destroyers, Bay-class minesweepers and Porte-class gate vessels to train reservists, with the vast majority of the ships having begun service in the 1950s and early 1960s. The navy lacked a mine warfare capability. Furthermore, the new Halifax-class frigates were not capable of inshore and restricted area patrol and finally, the government sought to keep the shipbuilding efforts ongoing, as the frigate program was already well underway.^[2]

The MCDV project was also the culmination of a series of political promises offered by then Minister of National Defence Gilles Lamontagne. The government sought to move the National Reserve Headquarters from Halifax, Nova Scotia, to Quebec City, Quebec, as part of their effort to increase French representation in the armed forces. The move was to provide a site where French-Canadians could live and work in their native language. Lamontagne faced opposition within the Forces due to Quebec City being far from the existing naval bases and the waters around it freezing during winter months. Lamontagne promised to replace the ships for naval reserve training in order to move the project forward.^[3] The program began in the 1987 National Defence White Paper under the concept of "Total Force". This was intended to mask reductions in the regular force by increasing the capabilities of the reserve forces. This led the navy to add minesweeping and coastal patrol duties to the reserve force's list of duties.^[4]

There were five main criteria for the design. The ships had to be built in Canada, they had to be inexpensive to build, they had to be operable by naval reservists, the design had to have role flexibility included, and they had to be inexpensive to operate. This was exemplified by the Royal Navy's River-class minesweeper which was operated by the Royal Navy Reserve.^[2] The design originally called for steel-hulled mine countermeasures vessels and training ships. The Kingston class was built to naval standards in stability and maneuverability, and in the magazines; but otherwise only to commercial standards, to reduce costs.^[5] The ships' mixed construction is visible in their two square, separated funnels, which were cheaper to manufacture, and their poor seakeeping and large radar signature.^[2][5] The vessels were re-designated MCDV from MM (General Mine Warfare Vessel) when two follow-on programmes of purely minesweeper/hunters were cancelled, denoting their mixed duties.^[6]

The ships have a standard displacement of 772 tonnes (760 long tons) light and 979 t (964 long tons) fully loaded. During sea trials, the vessels were found to be top heavy and a further 9 t (8.9 long tons) of permanent ballast was added. The Kingston class measure 55.31 metres (181 ft 6 in) long overall and 49 m (160 ft 9 in) between perpendiculars with a beam of 11.3 m (37 ft 1 in) and a draught of 3.42 m (11 ft 3 in). The vessels have a maximum crew of 47, with crew sizes changing depending on the vessel's task.^[5][7] The crew is a mix of reservists and regular force personnel, with the regular force personnel assigned to engine room and electronics tasks.^[2] The Kingston class are equipped with Kelvin Hughes Nucleus S-band surface search radar.^[5]

The Kingston class use an electric drive system that is powered by four Wärtsilä UD 23V12 diesel engines which are coupled to four Jeumont ANR 53-50-4 alternators, creating 715 kilowatts each. Two Jeumont C1 560 L electric motors provide power to the two LIPS FS-100 Z-drive azimuth thrusters which are fitted with fixed-pitch reversing propellers. In total the system creates 3,064 shaft horsepower (2,285 kW) and a maximum speed of 15 knots (28 km/h; 17 mph). When minesweeping, the vessels have a maximum speed of 10 knots (19 km/h; 12 mph). The Kingston class have a range of 5,000 nautical miles (9,300 km; 5,800 mi) at 8 knots (15 km/h; 9.2 mph) and have an endurance of 18 days.^[5][7]

The Kingston class were initially armed with a single Bofors 40-millimetre (1.6 in)/60 calibre^[a] Mk 1N/1 anti-aircraft gun mounted in a Mk 5C Boffin mount and two single 12.7 mm (0.50 in) Browning M2 machine guns. The Bofors guns were refurbished World War II models that had been previously used by the Canadian Army for air defence in Europe.^[5] The Bofors gun was mounted on the forecastle deck until their removal in 2014. The machine guns are mounted on either side at the front of the bridge deck.^[8] The 40 mm guns were used as monuments after being dismounted.^[9] In October 2006, Maritime Command experimented with mounting a remote controlled heavy machine gun station, the OTO Melara 12.7 mm RCHMG, in place of the 40 mm Bofors cannon aboard Summerside.^[10][11][12] The Nanuk .50 calibre RCWS from Rheinmetall was trialled as a replacement aboard HMCS Goose Bay in 2018.^[8] All twelve ships have degaussing coil arrays fitted, but only the first three ships have the control system, with it situated between the two funnels.^[2][5]

On the aft sweep deck, there are three positions that can receive a variety of mission payloads in the form of 6.1-metre (20 ft) ISO containers. The Royal Canadian Navy has a limited number of each mission payload;^[7]

• Two Indal Technologies AN/SLQ-38 deep mechanical minesweeping systems
• Four MDA Ltd. AN/SQS-511 heavyweight high-definition Route Survey System
• One ISE Ltd. Trailblazer bottom object inspection vehicle
• One ISE Ltd. HYSUB 50 deep seabed intervention system
• Fullerton and Sherwood Ltd. six-man, two-compartment containerised diving systems
• MDA Ltd. Interim Remote Minehunting and Disposal System control van

Furthermore, the vessels have additional systems not in an ISO container format that can be fitted, including;^[7]

• Two L3/Klein K 5500 high definition side scan sonars
• Four L3/Klein K 3000 dual frequency side scan sonars
• Two Deep Ocean Engineering Inc. Phantom 4 remotely operated vehicles (ROV)

The modules are split between the naval bases on each coast. The Trailblazer module is based at CFB Esquimalt, there are two route survey modules per coast, and the two minesweeping modules are located at CFB Halifax. In November 2009, the Boeing Insitu ScanEagle unmanned aerial vehicle was successfully trialled aboard a Kingston-class vessel.^[5]

The Royal Canadian Navy discarded a $100-million mid-life refit plan for the twelve vessels in this class.^[13] It was intended to retain the "mid-lifed" vessels through 2045–2055. While the RCN concluded that the money would be better spent in acquiring a new platform, the Liberal Government's 2017 defence policy statement, Strong, Secure and Engaged, did not reference replacing these vessels. The RCN review listed low speed and small size as reasons for the MCDV being inadequate for patrol duties (both are factors of the original specification). Notwithstanding the success of the ships in their deployment, critics suggest that patrol and training were tacked onto the mine-countermeasures role and that the platform lacks serious armament for a sovereignty enforcement role.^[13]

In October 2011, L-3 MAPPS was awarded a contract to supply degaussing systems for the Kingston-class ships. The advanced degaussing systems were to be delivered and supported locally in collaboration with SAM Electronics.^[14] In November 2012 MacDonald, Dettwiler and Associates was awarded a two-year $13.4 million contract to repair and upgrade the deployable sonar systems.^[15]

In 2018 the Royal Canadian Navy acquired the UAV AeroVironment Puma II AE with Mantis i45 Sensor for use on the Kingston class.^[16]

In May 1992, a $650 million contract was awarded to Halifax Shipyards of Halifax, Nova Scotia, to construct twelve ships of the class. The vessels would be tasked with coastal patrol, minesweeping, law enforcement, pollution surveillance and search and rescue duties. Steel cutting for the first ship begin in December 1993, and by July 1999 all twelve Kingston-class ships were in service.^[2]

The ships are evenly distributed between the east and west coasts. One vessel on each coast is maintained for rapid deployment: this responsibility is rotated amongst the ships.^[7] The Kingston-class ships deploy regularly as part of Operation Caribbe in the Caribbean Sea and the Central American Pacific coast.^[17][18] The ships also deploy to the Arctic as part of Operation Nanook,^[19] and in naval exercises off the west coast of Africa^[20] and in the Baltic Sea among others.^[21] On 13 May 2010, it was announced that six of the twelve MCDVs would be placed in extended readiness due to lack of funds and the inability of the Naval Reserve to provide sufficient personnel to man the ships. However, on 14 May that order was rescinded.^[22]

Kingston class construction data[5][7]
Pennant	Name	Builder	Laid down	Launched	Commissioned	Homeport	Status	Image
MM 700	Kingston	Halifax Shipyards, Halifax, Nova Scotia	12 December 1994	12 August 1995	21 September 1996	CFB Halifax	Active
MM 701	Glace Bay		28 April 1995	22 January 1996	26 October 1996	CFB Halifax	Active
MM 702	Nanaimo		11 August 1995	17 May 1996	10 May 1997	CFB Esquimalt	Active
MM 703	Edmonton		8 December 1995	31 October 1996	21 June 1997	CFB Esquimalt	Active
MM 704	Shawinigan		26 April 1996	15 November 1996	14 June 1997	CFB Halifax	Active
MM 705	Whitehorse		26 July 1996	24 February 1997	17 April 1998	CFB Esquimalt	Active
MM 706	Yellowknife		7 November 1996	5 June 1997	18 April 1998	CFB Esquimalt	Active
MM 707	Goose Bay		22 February 1997	4 September 1997	26 July 1998	CFB Halifax	Active
MM 708	Moncton		31 May 1997	5 December 1997	12 July 1998	CFB Halifax	Active
MM 709	Saskatoon		5 September 1997	30 March 1998	5 December 1998	CFB Esquimalt	Active
MM 710	Brandon		6 December 1997	10 July 1998	5 June 1999	CFB Esquimalt	Active
MM 711	Summerside		28 March 1998	26 September 1998	18 July 1999	CFB Halifax	Active

• Visby-class corvette
• Baynunah-class corvette
• Nornen-class patrol vessel

• Macpherson, Ken & Barrie, Ron (2002). The Ships of Canada's Naval Forces 1910–2002 (Third ed.). St. Catharines, Ontario: Vanwell Publishing. ISBN 978-1-55125-072-4.
• Milner, Marc (2010). Canada's Navy: The First Century (Second ed.). Toronto: University of Toronto Press. ISBN 978-0-8020-9604-3.
• Saunders, Stephen, ed. (2009). Jane's Fighting Ships 2009–2010 (112 ed.). Alexandria, Virginia: Jane's Information Group Inc. ISBN 978-0-7106-2888-6.
• Wertheim, Eric, ed. (2013). The Naval Institute Guide to Combat Fleets of the World (16th ed.). Annapolis, Maryland: Naval Institute Press. ISBN 9-7-815911-4954-5.

Wikimedia Commons has media related to Kingston class minesweepers.

• Canada’s Kingston-class Jack-of-all-Trades Vessels