VIEW Engineering was one of the first manufacturers of commercial machine vision systems.[1] These systems provided automated dimensional measurement, defect detection, alignment and quality control capabilities. They were used primarily in the Semiconductor device fabrication, Integrated circuit packaging, Printed circuit board, Computer data storage and Precision assembly / fabrication industries.[2] VIEW's systems used video and laser technologies to perform their functions without touching the parts being examined.
History
1976 origins
VIEW Engineering's Logo, circa 1976VIEW Engineering's Logo, circa 1996
While working as a physicist at Hughes Aircraft Company, Dick Hubach recognized a need for automated dimensional measurement systems, when he discovered that the cost to verify the correct manufacture of some aerospace components actually exceeded the cost to manufacture those components.[3] This recognition led to a new start-up company named VIEW Engineering.
VIEW Engineering was founded in Canoga Park, California in 1976.[1] The next year, VIEW introduced the word's first automated, 3-axis, machine vision-based, dimensional measurement system – the RB-1.[4] The RB-1 was the forerunner of modern machine vision-based Coordinate-measuring machines (CMMs). This was followed in 1978 by the introduction of the first pattern recognition (Template matching) system for automated Wirebonding machines and Wafer probers – the PR-1.[4]
General Motors Corporation invested in VIEW Engineering in 1984[6] as part of its plan to improve automobile manufacturing quality in the U.S. through widespread use of factory floor machine vision technology. In 1989, VIEW Engineering purchased Synthetic Vision Systems, Inc.[7]
VIEW Engineering was an OEM for Mitutoyo in the late 1980s. This relationship was concluded when Mitutoyo licensed VIEW's machine vision technology in 1994. This licensed technology became the foundation for Mitutoyo's video and laser-based CMMs.[8]
In 1996, Robotic Vision Systems, Inc. (RVSI) first brought a patent infringement lawsuit against VIEW Engineering related to the coplanarity measurement of packaged semiconductor devices.[9] In 2000, RVSI's patent was finally declared invalid and the U.S. District Court for the Central District of California ruled in favor of VIEW Engineering.[10] Even after this ruling, RVSI contemplated continuing its appeals through 2001.[11]
1996 purchase and continued existence
Also in 1996, VIEW Engineering was purchased by General Scanning, Inc. (GSI).[12] Quality Vision International, Inc. (QVI) purchased the company from GSI Lumonics (previously GSI) in 2000.[13] In 2005, QVI combined VIEW Engineering with Micro Metric, Inc. of San Jose, California, and in 2008 renamed the new company "VIEW Micro-Metrology."[1] In 2009, VIEW's California operations were relocated to QVI's Western Region facility in Tempe, Arizona.
VIEW Micro-Metrology continues to be global supplier of high-accuracy video coordinate measuring systems and software, primarily serving micro-electronic, mobile device and data storage manufacturing.[14]
Product timeline
Dr. Richard Hubach demonstrating a VIEW 1101 Pattern Recognition System.VIEW 1220, Précis 3000 & Bazic 8 Machine Vision-based CMMs.A VIEW Voyager 18x18 Machine Vision-based CMM with Microscope Optics.A VIEW 8100 SMT Process Characterization and Control System.A VIEW Machine Vision-based Automotive Shaft Measurement System, circa 2002.
1977: VIEW RB-1 – An automated, 3-axis, binary image, machine vision-based, dimensional measurement system (a forerunner of modern machine vision-based CMMs)
1978: VIEW PR-1 – A binary image, pattern recognition system for automated Wirebonding machines and Wafer probers
1981: VIEW 719 – A general-purpose, binary image, machine vision system for shop floor use
1982: VIEW 1101 – A 2nd generation, binary image, pattern recognition system for automated Wirebonding machines and Wafer probers
1982: VIEW 1119 – A combination of the 719 and the 1101 that provided pattern recognition and edge detection capabilities
1982: VIEW 1200 – A binary image, machine vision-based CMM
1985: VIEW 720 – A 2nd generation, general-purpose, grayscale image, machine vision system for shop floor use
VIEW Engineering's patents related to correlation-based pattern recognition were the foundation of the company's beginnings
Correlation-based Pattern Recognition hardware and software to find the position of specific, complex part features in video images. (United States Patent 4200861 & 4736437 & 4385322 & 4300164)[15]
A number of VIEW Engineering's 31 patents address key video technologies useful in machine vision-based CMMs including
Programmable Ring Light[16] hardware to enhance the appearance of weak-edges in video images by controlling illumination intensity, direction, color and angle of incidence. (United States Patent 4706168)[15] (Japan Patent 2001-324450)[17] (China Patent 200810207342)[17] (Canada Patent CA 1293232)[18]
Automatic, Video-based, Camera Focusing to determine the Z-axis position of an object under inspection. (United States Patent 4920273)[15] (Canada Patent CA 1255796)[19]
Ronchi Grid Surface Focus[20] hardware to allow automatic camera-focusing on reflective or low-texture surfaces. (United States Patent 4743771)[15]
Other VIEW Engineering patents relate to the 3D laser-scanning technology used in VIEW's PGA, QFP, TQFP, TSOP and BGA package inspection systems
Using Multiple Cameras to Image a Package. (United States Patent 4872052)[15]
Triangulation-based 3D Imaging. (United States Patent 5546189 & 5617209)[17] (Korea Patent 1019997000995)[18] (PCT Patent WO 1998/005923 & 1996/034253)[18] (Canada Patent CA 1287486 & CA 1265869)[18]
