The light-gathering power and resolution of a spotting scope is determined by the diameter of the objective lens, typically between 50 and 80 mm (2.0 and 3.1 in). The larger the objective, the more massive and expensive the telescope.
Spotting scope eyepieces are usually interchangeable to adapt for different magnifications, or may have variable zoom to give a range of magnifications. Magnifications less than 20× are unusual, as are magnifications more than 60× since the latter can lead to poorer image brightness, a narrow field of view and too much image shaking, even on a tripod. The eyepiece mount layout can be "straight-through" (the eyepiece is on the same axis as the scope body), or "angled" (the eyepiece is at an angle to the scope body—usually 45 degrees).
The high magnification of spotting scopes makes them prone to image disturbance from vibrations, so they are often stabilized with tripods or (less commonly) monopods, which provide a stationary and steady platform. Tripod heads can be used to control any required movements of the scope.
Gallery
An ornithologist uses a spotting scope at Rossitten Bird Observatory in 1939. This spotting scope has no zoom eyepiece, but three interchangeable eyepieces with different magnifications
A spotter (right) uses a spotting scope to assist a marksman. Spotting scopes are used on target ranges to avoid walking to the target to verify the placement of hits
Biathlon coaches use spotting scopes to verify and optimize competitors shot placement