In 1940, Motorola (then the Galvin Manufacturing Company) received a contract from the War Department to develop a portable, battery powered voice radio receiver/transmitter for field use by infantry units. The project engineering team consisted of Daniel E. Noble, who conceived of the design using frequency modulation, Henryk Magnuski who was the principal RF engineer, Marion Bond, Lloyd Morris, and Bill Vogel. The SCR-300 operated in the 40.0 to 48.0 MHz frequency range, and was channelized. Along with other mobile FM tank and artillery radios such as the SCR-508 (20.0 to 27.9 MHz) and the SCR-608 (27.0 to 38.9 MHz), the SCR-300 marked the beginning of the transition of combat-net radio from low-HF AM/CW to low-VHF FM.[2]
Although a relatively large backpack-carried radio rather than a handheld model, the SCR-300 was described in War Department Technical Manual TM-11-242 as "primarily intended as a walkie-talkie for foot combat troops", and so the term "walkie-talkie" first came into use.[3]
The final acceptance tests took place at Fort Knox, Kentucky in Spring 1942. The performance of the SCR-300 during those tests demonstrated its capacity to communicate through interference and the rugged quality of the design. Motorola was to produce nearly 50,000 of the SCR-300 units during the course of World War II.[4][5]
The SCR-300 saw action in the Pacific Theater, beginning in New Georgia in August 1943. Colonel Ankenbrandt informed General Meade that "they are exactly what is needed for front line communications in this theater". In his point of view, the main difficulty was keeping them supplied with fresh batteries.[6]
The British adopted the design of the SCR-300 for their own use from 1947 as the "Wireless Set No. 31".[8][9]
Specifications
The SCR-300 was an 18-tube battery operated VHF battlefield radio half-duplextransceiver. It used an FM transmitter section and a double superheterodyne receiver. It incorporated an adjustable squelch circuit, an automatic frequency control circuit, a crystal controlled calibration circuit, easy to use tuning/channel selection, tuning lock to prevent accidental frequency changes, and radio relay or retransmission capability using two SCR-300 units and the appropriate cable assemblies. [8][10]