PCSat2

PCSat2 is an amateur radio satellite created by the U.S. Naval Academy.

It was installed on the International Space Station on August 3, 2005. PCSAT2 was recovered from the outside of the ISS by astronauts on the 3rd EVA of mission STS-115 and was returned to Earth.

PCsat2 transmitted packet bursts every 3 minutes on 437.975 MHz. It had an UHF FM repeater on 437.975 MHz +/− 9 kHz, and 1200/9600 baud digital operation.

It also carried a PSK31 Linear/FM Satellite translator accepting 3 kHz SSB channel in the 10 meter band at 29.4 MHz and repeating that in baseband on a VHF or UHF narrow-band FM downlink. This is intended to allow multiple simultaneous full duplex narrow band communications using morse or PSK31 to be relayed by PCSat2.[1]

References

  1. ^ "PSKsat DESIGN NOTES". August 2, 2007. Archived from the original on August 2, 2007. Retrieved January 24, 2018.


Content Disclaimer

Informasi ini disarikan dari Wikipedia dan disajikan kembali untuk tujuan edukasi. Konten tersedia di bawah lisensi CC BY-SA 3.0. Kami tidak bertanggung jawab atas ketidakakuratan data yang bersumber dari kontribusi publik tersebut.

  1. The information displayed on this website is sourced in part or in whole from Wikipedia and has been adapted for the purpose of restating it. We strive to provide accurate and relevant information, however:
  2. There is no guarantee of absolute accuracy. Wikipedia is an open, collaborative project that can be edited by anyone, so information is subject to change.
  3. It is not intended to constitute professional advice. The content displayed is for informational and educational purposes only. For important decisions (e.g., medical, legal, or financial), please consult a professional.
  4. Content copyright. Wikipedia is licensed under the Creative Commons Attribution-ShareAlike License (CC BY-SA). This means that content may be reused with appropriate attribution and shared under a similar license.
  5. Responsible use. Any risk arising from the use of information from this website is entirely the responsibility of the user.