This article does not cite any sources. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed. Find sources: "Null" radio – news · newspapers · books · scholar · JSTOR (December 2009) (Learn how and when to remove this message)

In radio electronics, a null is a direction in an antenna's radiation pattern where the antenna radiates almost no radio waves, so the far field signal strength is a local minimum. Nulls occur because different parts of an antenna radiate radio waves of different phase. In directions at which the antenna radiates equal amplitude radio waves of opposite phase, the radio waves cancel, resulting in little or no radio power being radiated in that direction. In other directions the radio waves from different parts of the antenna are in phase and reinforce, resulting in a maximum signal strength in the radiation pattern, called a lobe.

In transmitting antennas designed to provide broad coverage nulls can be a problem, preventing reception in a given area. Null fill in the vertical plane is used to prevent this.

Nulls can also be used to advantage. In a radio receiver the receiver's antenna can be adjusted so the direction of the interference source is located in a null of the antenna, to minimize reception of interference.

Nulls have also been used intentionally to prevent an antenna from broadcasting to a certain area. For example, CIII-DT-22, a repeater of Toronto-based Global TV station CIII-DT in Wheatley has a null towards Windsor to protect broadcast rights of American stations in the bordering Detroit area.^{[citation needed]}

Radio direction finding (RDF) receivers use special antennas with very narrow, sharp nulls to find the location of transmitters. The antenna is rotated until the received signal is minimum; at that point the antenna's null is pointed along the bearing line to the transmitter.

• Null vector