In physics, magnetic topological insulators are three dimensional magnetic materials with a non-trivial topological index protected by a symmetry other than time-reversal.^{[1][2][3][4][5]} This type of material conducts electricity on its outer surface, but its volume behaves like an insulator.^[6]

In contrast with a non-magnetic topological insulator, a magnetic topological insulator can have naturally gapped surface states as long as the quantizing symmetry is broken at the surface. These gapped surfaces exhibit a topologically protected half-quantized surface anomalous Hall conductivity (${\displaystyle e^{2}/2h}$) perpendicular to the surface. The sign of the half-quantized surface anomalous Hall conductivity depends on the specific surface termination.^[7]

The ${\displaystyle \mathbb {Z} _{2}}$ classification of a 3D crystalline topological insulator can be understood in terms of the axion coupling ${\displaystyle \theta }$. A scalar quantity that is determined from the ground state wavefunction^[8]

${\displaystyle \theta =-{\frac {1}{4\pi }}\int _{\rm {BZ}}d^{3}k\,\epsilon ^{\alpha \beta \gamma }{\text{Tr}}{\Big [}{\mathcal {A}}_{\alpha }\partial _{\beta }{\mathcal {A}}_{\gamma }-i{\frac {2}{3}}{\mathcal {A}}_{\alpha }{\mathcal {A}}_{\beta }{\mathcal {A}}_{\gamma }{\Big ]}}$ .

where ${\displaystyle {\mathcal {A}}_{\alpha }}$ is a shorthand notation for the Berry connection matrix

${\displaystyle {\mathcal {A}}_{j}^{nm}(\mathbf {k} )=\langle u_{n\mathbf {k} }|i\partial _{k_{j}}|u_{m\mathbf {k} }\rangle }$,

where ${\displaystyle |u_{m\mathbf {k} }\rangle }$ is the cell-periodic part of the ground state Bloch wavefunction.

The topological nature of the axion coupling is evident if one considers gauge transformations. In this condensed matter setting a gauge transformation is a unitary transformation between states at the same ${\displaystyle \mathbf {k} }$ point

${\displaystyle |{\tilde {\psi }}_{n\mathbf {k} }\rangle =U_{mn}(\mathbf {k} )|\psi _{n\mathbf {k} }\rangle }$.

Now a gauge transformation will cause ${\displaystyle \theta \rightarrow \theta +2\pi n}$ , ${\displaystyle n\in \mathbb {N} }$. Since a gauge choice is arbitrary, this property tells us that ${\displaystyle \theta }$ is only well defined in an interval of length ${\displaystyle 2\pi }$ e.g. ${\displaystyle \theta \in [-\pi ,\pi ]}$.

The final ingredient we need to acquire a ${\displaystyle \mathbb {Z} _{2}}$ classification based on the axion coupling comes from observing how crystalline symmetries act on ${\displaystyle \theta }$.

• Fractional lattice translations ${\displaystyle \tau _{q}}$, n-fold rotations ${\displaystyle C_{n}}$: ${\displaystyle \theta \rightarrow \theta }$.
• Time-reversal ${\displaystyle T}$, inversion ${\displaystyle I}$: ${\displaystyle \theta \rightarrow -\theta }$.

The consequence is that if time-reversal or inversion are symmetries of the crystal we need to have ${\displaystyle \theta =-\theta }$ and that can only be true if ${\displaystyle \theta =0}$(trivial),${\displaystyle \pi }$(non-trivial) (note that ${\displaystyle -\pi }$ and ${\displaystyle \pi }$ are identified) giving us a ${\displaystyle \mathbb {Z} _{2}}$ classification. Furthermore, we can combine inversion or time-reversal with other symmetries that do not affect ${\displaystyle \theta }$ to acquire new symmetries that quantize ${\displaystyle \theta }$. For example, mirror symmetry can always be expressed as ${\displaystyle m=I*C_{2}}$ giving rise to crystalline topological insulators,^[9] while the first intrinsic magnetic topological insulator MnBi${\displaystyle _{2}}$Te${\displaystyle _{4}}$^[10][11] has the quantizing symmetry ${\displaystyle S=T*\tau _{1/2}}$.

So far we have discussed the mathematical properties of the axion coupling. Physically, a non-trivial axion coupling (${\displaystyle \theta =\pi }$) will result in a half-quantized surface anomalous Hall conductivity (${\displaystyle \sigma _{\text{AHC}}^{\text{surf}}=e^{2}/2h}$) if the surface states are gapped. To see this, note that in general ${\displaystyle \sigma _{\text{AHC}}^{\text{surf}}}$ has two contribution. One comes from the axion coupling ${\displaystyle \theta }$, a quantity that is determined from bulk considerations as we have seen, while the other is the Berry phase ${\displaystyle \phi }$ of the surface states at the Fermi level and therefore depends on the surface. In summary for a given surface termination the perpendicular component of the surface anomalous Hall conductivity to the surface will be

${\displaystyle \sigma _{\text{AHC}}^{\text{surf}}=-{\frac {e^{2}}{h}}{\frac {\theta -\phi }{2\pi }}\ {\text{mod}}\ e^{2}/h}$.

The expression for ${\displaystyle \sigma _{\text{AHC}}^{\text{surf}}}$ is defined ${\displaystyle {\text{mod}}\ e^{2}/h}$ because a surface property (${\displaystyle \sigma _{\text{AHC}}^{\text{surf}}}$) can be determined from a bulk property (${\displaystyle \theta }$) up to a quantum. To see this, consider a block of a material with some initial ${\displaystyle \theta }$ which we wrap with a 2D quantum anomalous Hall insulator with Chern index ${\displaystyle C=1}$. As long as we do this without closing the surface gap, we are able to increase ${\displaystyle \sigma _{\text{AHC}}^{\text{surf}}}$ by ${\displaystyle e^{2}/h}$ without altering the bulk, and therefore without altering the axion coupling ${\displaystyle \theta }$.

One of the most dramatic effects occurs when ${\displaystyle \theta =\pi }$ and time-reversal symmetry is present, i.e. non-magnetic topological insulator. Since ${\displaystyle {\boldsymbol {\sigma }}_{\text{AHC}}^{\text{surf}}}$ is a pseudovector on the surface of the crystal, it must respect the surface symmetries, and ${\displaystyle T}$ is one of them, but ${\displaystyle T{\boldsymbol {\sigma }}_{\text{AHC}}^{\text{surf}}=-{\boldsymbol {\sigma }}_{\text{AHC}}^{\text{surf}}}$ resulting in ${\displaystyle {\boldsymbol {\sigma }}_{\text{AHC}}^{\text{surf}}=0}$. This forces ${\displaystyle \phi =\pi }$ on every surface resulting in a Dirac cone (or more generally an odd number of Dirac cones) on every surface and therefore making the boundary of the material conducting.

On the other hand, if time-reversal symmetry is absent, other symmetries can quantize ${\displaystyle \theta =\pi }$ and but not force ${\displaystyle {\boldsymbol {\sigma }}_{\text{AHC}}^{\text{surf}}}$ to vanish. The most extreme case is the case of inversion symmetry (I). Inversion is never a surface symmetry and therefore a non-zero ${\displaystyle {\boldsymbol {\sigma }}_{\text{AHC}}^{\text{surf}}}$ is valid. In the case that a surface is gapped, we have ${\displaystyle \phi =0}$ which results in a half-quantized surface AHC ${\displaystyle \sigma _{\text{AHC}}^{\text{surf}}=-{\frac {e^{2}}{2h}}}$.

A half quantized surface Hall conductivity and a related treatment is also valid to understand topological insulators in magnetic field ^[12] giving an effective axion description of the electrodynamics of these materials.^[13] This term leads to several interesting predictions including a quantized magnetoelectric effect.^[14] Evidence for this effect has recently been given in THz spectroscopy experiments performed at the Johns Hopkins University.^[15]

This section needs expansion. You can help by adding to it. (February 2021)

Magnetic topological insulators have proven difficult to create experimentally. In 2023 it was estimated that a magnetic topological insulator might be developed in 15 years' time.^[16]

A compound made from manganese, bismuth, and tellurium (MnBi2Te4) has been predicted to be a magnetic topological insulator. In 2024, scientists at the University of Chicago used MnBi2Te4 to develop a form of optical memory which is switched using lasers. This memory storage device could store data more quickly and efficiently, including in quantum computing.^[17]