In the latter half of the 19th century, the Spanish Navy had built a series of ironclad warships that culminated in the barbette shipPelayo in the 1880s. Following the destruction of much of the Spanish fleet in the Spanish–American War in 1898, Spain slowly began to rebuild its navy. In the early 20th century, the Spanish Navy built three battleships and planned several more; the three ships that were completed were the vessels of the España class. These ships were the smallest dreadnought-type battleships ever built. A further three ships of the Reina Victoria Eugenia class were authorized by the Navy Law of 1913, but the outbreak of World War I prevented these ships from being built, as Spain was heavily dependent on Great Britain for material and technical expertise. The three completed battleships all served in the Rif War in North Africa, where the lead ship, España, ran aground and was wrecked.
Following the end of the First World War, occasional plans for the construction of new battleships were proposed, including a small design deriving from Britain's powerful Nelson-class battleships. However, nothing had come of these efforts by the time of the outbreak of the Spanish Civil War. Following the victory of Francisco Franco's Nationalists in that conflict, in which both of the surviving Spanish battleships—one serving on the side of the Nationalists, the other on that of the Republicans—had been destroyed, proposals for the construction of four fast battleships to an Italian design, as well as the construction of "large cruisers"—the only battlecruiser designs proposed for or by Spain—were made. However, the outbreak of the Second World War resulted in these plans being disrupted.
Authorized under the Navy Law of 1908 and assigned to the Primera Escuadra (First Squadron), the España class were the first and only Spanish dreadnoughts, and also the smallest of that type of ship ever to be built.[1] Considered by some to be more "Dreadnought-type coast-defense ships" than pure battleships,[2] the three ships of the class were built in Ferrol by Sociedad Española de Construcción Naval (SECN), the lead ship being completed in under four years, but the onset of World War I resulted in delays to the remaining two ships, and especially the third, as equipment and armament deliveries from England were disrupted due to the war.[3]
Obsolete before completion due to the rapid progress of naval technology, the Españas saw combat service in the Rif Wars and the Spanish Civil War, España being wrecked on the Moroccan coast in 1923,[4]Alfonso XIII being renamed España following the establishment of the Second Spanish Republic in 1931.[3] In the mid-1930s, it was proposed that the two surviving ships of the class be rebuilt as "pocket battleships", including a lengthening of the hull and rearranging of the turrets to a centerline alignment.[2] By 1936, a more modest rebuild was proposed, including conversion to oil firing, but the outbreak of the Spanish Civil War put this plan to rest.[5]
The remaining two ships of the class, one operating on each side, were both lost in the Spanish Civil War. España (ex-Alfonso XIII), serving the Nationalist side, struck a mine in April 1937 and sunk, while Jaime I fighting as part of the Republican navy, suffered an internal explosion at Cartagena in June 1937, being scuttled as a precautionary measure afterwards. The wreck was raised the following year before being scrapped in 1939.[4][5]
Authorized as the Plan de la Segunda Escuadra under the Navy Law of 1913, the three ships of the Reina Victoria Eugenia-class, named for King Alfonso's queen consort and designated ships "A", "B" and "C" (only "A" having a formally proposed name), were designed by Vickers-Armstrongs and were planned to displace 21,000 long tons (21,000 t) with a speed of 21 knots (39 km/h; 24 mph).[4] Early plans for the type called for an armament of 15-inch (381 mm) guns, however financial difficulties resulted in the selection of an armament of eight 13.5 in (343 mm) weapons instead. As significant technical assistance from Britain would have been required for construction of the class, the outbreak of the First World War led to the cancellation of the project.[2]
Following the end of the First World War, Spain did not participate in the Washington Naval Conference which limited battleship construction for its signatories. Nevertheless, battleships of the 35,000-long-ton (36,000 t) displacement class—the limit under the Washington Naval Treaty—were considered by the Spanish Navy in the early 1920s. By the early 1930s, the navy made proposals for a "reduced Nelson type" ship, although nothing came of either project.[2]
After his victory in the Spanish Civil War, Francisco Franco made plans for the Spanish Navy that included the acquisition of four modern battleships, and a variation on the Italian Littorio-class battleships was the favored candidate to fill the requirement.[3] In late 1939, a Spanish mission to Italy received assurances of technical support for the construction of ships of the class in Spanish yards, and a slipway of sufficient size to construct two ships at a time was built at Ferrol. However, Italy's entry into the Second World War in 1940, combined with the limited resources of Spain, led to the cancellation of the project.[6]
A "super-Treaty cruiser" type was also projected as part of Franco's naval expansion plans, with some designs proposed for the type calling for an armament of six 12-inch (305 mm) guns; alternatively, some have speculated that the Spanish desired to purchase the two triple 283 mm (11.1 in) turrets that were available following the decision by the German Kriegsmarine to rebuild the damaged battleship Gneisenau with twin 381 mm (15 in) turrets. The war situation meant that nothing was to come of this project either.[7]
Garzke, William H. & Dulin, Robert O. (1985). Battleships: Axis and Neutral Battleships in World War II. Annapolis: Naval Institute Press. ISBN978-0-87021-101-0.