The standards are protected by copyright and most of them must be purchased. However, about 300 of the standards produced by ISO and IEC's Joint Technical Committee 1 (JTC 1) have been made freely and publicly available.[2]
ISO 14000 – ISO 14999
ISO 14000 Environmental management systems (This is a set of standards, rather than a single standard)
ISO 14001:2015 Environmental management systems – Requirements with guidance for use
ISO 14004:2016 Environmental management systems – General guidelines on implementation
ISO 14005:2010 Environmental management systems – Guidelines for the phased implementation of an environmental management system, including the use of environmental performance evaluation
ISO 14006:2011 Environmental management systems – Guidelines for incorporating ecodesign
ISO 14015:2022 Environmental management — Guidelines for environmental due diligence assessment
ISO 14020:2000 Environmental labels and declarations – General principles
ISO 14031 Environmental management - Environmental performance evaluation – Guidelines
ISO 14045:2012 describes the principles, requirements and guidelines for eco-efficiency assessment for product systems [3]
ISO 14046:2014 - Environmental management — Water footprint — Principles, requirements and guidelines
ISO 14117:2012 Active implantable medical devices – Electromagnetic compatibility – EMC test protocols for implantable cardiac pacemakers, implantable cardioverter defibrillators and cardiac resynchronization devices
ISO 14132 Optics and photonics - Vocabulary for telescopic systems
ISO 14132-1:2015 Part 1: General terms and alphabetical indexes of terms in ISO 14132
ISO 14132-2:2015 Part 2: Terms for binoculars, monoculars and spotting scopes
ISO 14132-3:2014 Part 3: Terms for telescopic sights
ISO 14132-4:2015 Part 4: Terms for astronomical telescopes
ISO 14132-5:2008 Part 5: Terms for night vision devices
ISO/IEC 14136:1995 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Identification supplementary services
ISO 14139:2000 Hydrometric determinations – Flow measurements in open channels using structures – Compound gauging structures
ISO 14242 Implants for surgery – Wear of total hip-joint prostheses
ISO 14242-1:2014 Part 1: Loading and displacement parameters for wear-testing machines and corresponding environmental conditions for test
ISO 14242-2:2016 Part 2: Methods of measurement
ISO 14242-3:2009 Part 3: Loading and displacement parameters for orbital bearing type wear testing machines and corresponding environmental conditions for test
ISO 14243 Implants for surgery – Wear of total knee-joint prostheses
ISO 14243-1:2009 Part 1: Loading and displacement parameters for wear-testing machines with load control and corresponding environmental conditions for test
ISO 14243-2:2016 Part 2: Methods of measurement
ISO 14243-3:2014 Part 3: Loading and displacement parameters for wear-testing machines with displacement control and corresponding environmental conditions for test
ISO/IEC 14251:1995 Information technology – Data interchange on 12.7 mm 36-track magnetic tape cartridges
ISO 14253 Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment
ISO 14253-1:2013 Part 1: Decision rules for proving conformity or nonconformity with specifications
ISO 14253-2:2011 Part 2: Guidance for the estimation of uncertainty in GPS measurement, in calibration of measuring equipment and in product verification
ISO 14253-3:2011 Part 3: Guidelines for achieving agreements on measurement uncertainty statements
ISO/TS 14253-4:2010 Part 4: Background on functional limits and specification limits in decision rules
ISO 14253-5:2015 Part 5: Uncertainty in verification testing of indicating measuring instruments
ISO/TR 14253-6:2012 Part 6: Generalized decision rules for the acceptance and rejection of instruments and workpieces
ISO/TS 14265:2011 Health Informatics – Classification of purposes for processing personal health information
ISO/TR 14283:2004 Implants for surgery – Fundamental principles
ISO 14289 Document management applications - Electronic document file format enhancement for accessibility
ISO 14289-1:2014 Part 1: Use of ISO 32000-1 (PDF/UA-1)
ISO/TR 14292:2012 Health informatics – Personal health records – Definition, scope and context
ISO 14296:2016 Intelligent transport systems – Extension of map database specifications for applications of cooperative ITS
ISO 14302:2002 Space systems – Electromagnetic compatibility requirements
ISO 14362 Textiles - Methods for determination of certain aromatic amines derived from azo colorants
ISO 14362-1:2017 Part 1: Detection of the use of certain azo colorants accessible with and without extracting the fibres
ISO 14362-3:2017 Part 3: Detection of the use of certain azo colorants, which may release 4-aminoazobenzene
ISO/IEC TR 14369:2018 Information technology – Programming languages, their environments and system software interfaces – Guidelines for the preparation of language-independent service specifications (LISS)
ISO 14405 Geometrical product specifications (GPS) – Dimensional tolerancing
ISO 14405-2:2011 Part 2: Dimensions other than linear sizes
ISO 14405-3:2016 Part 3: Angular sizes
ISO 14406:2010 Geometrical product specifications (GPS) - Extraction
ISO 14408:2016 Tracheal tubes designed for laser surgery – Requirements for marking and accompanying information
ISO 14416:2003 Information and documentation – Requirements for binding of books, periodicals, serials and other paper documents for archive and library use – Methods and materials
ISO/IEC 14417:1999 Information technology – Data recording format DD-1 for magnetic tape cassette conforming to IEC 1016
ISO/TS 14441:2013 Health informatics – Security and privacy requirements of EHR systems for use in conformity assessment
ISO 14451 Pyrotechnic articles – Pyrotechnic articles for vehicles
ISO 14451-1:2013 Part 1: Terminology
ISO 14452:2012 Network services billing – Requirements
ISO 14461 Milk and milk products – Quality control in microbiological laboratories
ISO 14461-1:2005 Part 1: Analyst performance assessment for colony counts
ISO 14461-2:2005 Part 2: Determination of the reliability of colony counts of parallel plates and subsequent dilution steps
ISO/IEC 14462:2010 Information technology - Open-edi reference model
ISO/TR 14468:2010 Selected illustrations of attribute agreement analysis
ISO/IEC TR 14471:2007 Information technology - Software engineering - Guidelines for the adoption of CASE tools
ISO/IEC 14473:1999 Information technology - Office equipment - Minimum information to be specified for image scanners
ISO/IEC 14474:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Functional requirements for static circuit-mode inter-PINX connections
ISO/IEC TR 14475:2001 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Architecture and scenarios for Private Integrated Services Networking
ISO/IEC 14476 Information technology – Enhanced communications transport protocol
ISO/IEC 14476-1:2002 Specification of simplex multicast transport
ISO/IEC 14476-2:2003 Specification of QoS management for simplex multicast transport
ISO/IEC 14476-3:2008 Specification of duplex multicast transport
ISO/IEC 14476-4:2010 Specification of QoS management for duplex multicast transport
ISO/IEC 14476-5:2008 Specification of N-plex multicast transport
ISO/IEC 14476-6:2010 Specification of QoS management for n-plex multicast transport
ISO/IEC 14478 Information technology - Computer graphics and image processing - Presentation Environment for Multimedia Objects (PREMO)
ISO/IEC 14478-1:1998 Part 1: Fundamentals of PREMO
ISO/IEC 14478-2:1998 Part 2: Foundation Component
ISO/IEC 14478-3:1998 Part 3: Multimedia Systems Services
ISO/IEC 14478-4:1998 Part 4: Modelling, rendering and interaction component
ISO/IEC 14492:2001 Information technology - Lossy/lossless coding of bi-level images
ISO/IEC 14495 Information technology - Lossless and near-lossless compression of continuous-tone still images
ISO/IEC 14495-1:1999 Baseline
ISO/IEC 14495-2:2003 Extensions
ISO/IEC 14496 Information technology – Coding of audio-visual objects
ISO 14500:2003 Textile machinery and accessories – Harnesses for Jacquard weaving machines – Vocabulary
ISO 14509 Small craft – Airborne sound emitted by powered recreational craft
ISO 14509-1:2008 Part 1: Pass-by measurement procedures
ISO 14509-3:2009 Part 3: Sound assessment using calculation and measurement procedures
ISO 14511:2001 Measurement of fluid flow in closed conduits – Thermal mass flowmeters
ISO/IEC 14515 Information technology - Portable Operating System Interface (POSIX) - Test methods for measuring conformance to POSIX
ISO/IEC 14515-1:2000 Part 1: System interfaces
ISO/IEC TR 14516:2002 Information technology - Security techniques - Guidelines for the use and management of Trusted Third Party services
ISO/IEC 14517:1996 Information technology - 130 mm optical disk cartridges for information interchange - Capacity: 2.6 GB per cartridge
ISO/IEC 14519:2001 Information technology - POSIX Ada Language Interfaces - Binding for System Application Program Interface (API)
ISO 14532:2014 Natural gas – Vocabulary
ISO 14533 Processes, data elements and documents in commerce, industry and administration – Long term signature profiles
ISO 14533-1:2014 Part 1: Long term signature profiles for CMS Advanced Electronic Signatures (CAdES)
ISO 14533-2:2012 Part 2: Long term signature profiles for XML Advanced Electronic Signatures (XAdES)
ISO 14533-3:2017 Part 3: Long term signature profiles for PDF Advanced Electronic Signatures (PAdES)
ISO 14534:2011 Ophthalmic optics – Contact lenses and contact lens care products – Fundamental requirements
ISO 14539:2000 Manipulating industrial robots - Object handling with grasp-type grippers - Vocabulary and presentation of characteristics
ISO/IEC 14543 Information technology – Home Electronic System (HES) architecture
ISO/IEC 14543-2-1:2006 Part 2-1: Introduction and device modularity
ISO/IEC 14543-3-1:2006 Part 3-1: Communication layers – Application layer for network based control of HES Class 1
ISO/IEC 14543-3-2:2006 Part 3-2: Communication layers – Transport, network and general parts of data link layer for network based control of HES Class 1
ISO/IEC 14543-3-3:2007 Part 3-3: User process for network based control of HES Class 1
ISO/IEC 14543-3-4:2007 Part 3-4: System management – Management procedures for network based control of HES Class 1
ISO/IEC 14543-3-5:2007 Part 3-5: Media and media dependent layers – Power line for network based control of HES Class 1
ISO/IEC 14543-3-6:2007 Part 3-6: Media and media dependent layers – Network based on HES Class 1, twisted pair
ISO/IEC 14543-3-7:2007 Part 3-7: Media and media dependent layers – Radio frequency for network based control of HES Class 1
ISO/IEC 14543-3-10:2012 Part 3-10: Wireless short-packet (WSP) protocol optimized for energy harvesting – Architecture and lower layer protocols
ISO/IEC 14543-3-11:2016 Part 3-11: Frequency modulated wireless short-packet (FMWSP) protocol optimised for energy harvesting – Architecture and lower layer protocols
ISO/IEC TR 14543-4:2002 Part 4: Home and building automation in a mixed-use building
ISO/IEC 14543-4-1:2008 Part 4-1: Communication layers – Application layer for network enhanced control devices of HES Class 1
ISO/IEC 14543-4-2:2008 Part 4-2: Communication layers – Transport, network and general parts of data link layer for network enhanced control devices of HES Class 1
ISO/IEC 14543-4-3:2015 Part 4-3: Application layer interface to lower communications layers for network enhanced control devices of HES Class 1
ISO/IEC 14543-5-1:2010 Part 5-1: Intelligent grouping and resource sharing for Class 2 and Class 3 – Core protocol
ISO/IEC 14543-5-3:2012 Part 5-3: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Basic application
ISO/IEC 14543-5-4:2010 Part 5-4: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Device validation
ISO/IEC 14543-5-5:2012 Part 5-5: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Device type
ISO/IEC 14543-5-6:2012 Part 5-6: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Service type
ISO/IEC 14543-5-7:2015 Part 5-7: Intelligent grouping and 3 resource sharing – Remote access system architecture
ISO/IEC 14543-5-8:2017 Part 5-8: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Remote access core protocol
ISO/IEC 14543-5-9:2017 Part 5-9: Intelligent grouping and resource sharing for HES class 2 and class 3 – Remote access service platform
ISO/IEC 14543-5-21:2012 Part 5-21: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Application profile – AV profile
ISO/IEC 14543-5-22:2010 Part 5-22: Intelligent grouping and resource sharing for HES Class 2 and Class 3 – Application profile – File profile
ISO 14560:2004 Acceptance sampling procedures by attributes - Specified quality levels in nonconforming items per million
ISO/TR 14564:1995 Shipbuilding and marine structures - Marking of escape routes
ISO/IEC 14568:1997 Information technology - DXL: Diagram eXchange Language for tree-structured charts
ISO/IEC 14575:2000 Information technology - Microprocessor systems - Heterogeneous InterConnect (HIC) (Low-Cost, Low-Latency Scalable Serial Interconnect for Parallel System Construction)
ISO/IEC 14576:1999 Information technology - Synchronous Split Transfer Type System Bus (STbus) - Logical Layer
ISO 14580:2011 Hexalobular socket cheese head screws
ISO 14588:2000 Blind rivets - Terminology and definitions
ISO 14641-1:2012 Specifications concerning the design and the operation of an information system for electronic information preservation
ISO 14644 Cleanrooms and associated controlled environments
ISO/IEC 14651:2020 Information technology — International string ordering and comparison — Method for comparing character strings and description of the common template tailorable ordering
ISO/IEC 14662:2010 Information technology – Open-edi reference model
ISO/TR 14685:2001 Hydrometric determinations – Geophysical logging of boreholes for hydrogeological purposes – Considerations and guidelines for making measurements
ISO 14686:2003 Hydrometric determinations – Pumping tests for water wells – Considerations and guidelines for design, performance and use
ISO 14695:2003 Industrial fans – Method of measurement of fan vibration
ISO 14698 Cleanrooms and associated controlled environments – Biocontamination control
ISO 14698-1:2003 General principles and methods
ISO 14698-2:2003 Evaluation and interpretation of biocontamination data
ISO/IEC 14699:1997 Information technology – Open Systems Interconnection – Transport Fast Byte Protocol
ISO/IEC 14700:1997 Information technology – Open Systems Interconnection – Network Fast Byte Protocol
ISO 14708 Implants for surgery – Active implantable medical devices
ISO 14708-1:2014 Part 1: General requirements for safety, marking and for information to be provided by the manufacturer
ISO 14708-2:2012 Part 2: Cardiac pacemakers
ISO 14708-3:2017 Part 3: Implantable neurostimulators
ISO 14708-4:2008 Part 4: Implantable infusion pumps
ISO 14708-5:2010 Part 5: Circulatory support devices
ISO 14708-6:2010 Part 6: Particular requirements for active implantable medical devices intended to treat tachyarrhythmia (including implantable defibrillators)
ISO 14708-7:2013 Part 7: Particular requirements for cochlear implant systems
ISO/IEC 14709 Information technology - Configuration of Customer Premises Cabling (CPC) for applications
ISO/IEC 14709-2:1998 Part 2: Integrated Services Digital Network (ISDN) primary rate
ISO 14722:1998 Moped and moped-rider kinematics – Vocabulary
ISO 14726:2008 Ships and marine technology – Identification colours for the content of piping systems
ISO 14729:2001 Ophthalmic optics – Contact lens care products – Microbiological requirements and test methods for products and regimens for hygienic management of contact lenses
ISO 14730:2014 Ophthalmic optics – Contact lens care products – Antimicrobial preservative efficacy testing and guidance on determining discard date
ISO 14739 Document management - 3D use of Product Representation Compact (PRC) format
ISO 14739-1:2014 Part 1: PRC 10001
ISO/TR 14742:2010 Financial services – Recommendations on cryptographic algorithms and their use
ISO/IEC 14750:1999 Information technology – Open Distributed Processing – Interface Definition Language
ISO/IEC 14752:2000 Information technology - Open Distributed Processing - Protocol support for computational interactions
ISO/IEC 14753:1999 Information technology - Open Distributed Processing - Interface references and binding
ISO/IEC 14754:1999 Information technology – Pen-Based Interfaces – Common gestures for Text Editing with Pen-Based Systems
ISO/IEC 14755:1997 Information technology – Input methods to enter characters from the repertoire of ISO/IEC 10646 with a keyboard or other input device
ISO/IEC 14756:1999 Information technology - Measurement and rating of performance of computer-based software systems
ISO/IEC 14760:1997 Information technology - Data interchange on 90 mm overwritable and read only optical disk cartridges using phase change - Capacity: 1.3 GB per cartridge
ISO/IEC 14762:2009 Information technology - Functional safety requirements for Home and Building Electronic Systems (HBES)
ISO/IEC 14763 Information technology - Implementation and operation of customer premises cabling
ISO/IEC 14763-1:1999 Part 1: Administration
ISO/IEC 14763-2:2012 Part 2: Planning and installation
ISO/IEC TR 14763-2-1:2011 Part 2-1: Planning and installation - Identifiers within administration systems
ISO/IEC 14763-3:2014 Part 3: Testing of optical fibre cabling
ISO/IEC 14765:1997 Information technology - Framework for protocol identification and encapsulation
ISO/IEC 14766:1997 Information technology - Telecommunications and information exchange between systems - Use of OSI applications over the Internet Transmission Control Protocol (TCP)
ISO/IEC 14769:2001 Information technology - Open Distributed Processing - Type Repository Function
ISO/IEC 14771:1999 Information technology - Open Distributed Processing - Naming framework
ISO 14837 Mechanical vibration – Ground-borne noise and vibration arising from rail systems
ISO 14837-1:2005 Part 1: General guidance
ISO/TS 14837-31:2017 Part 31: Guideline on field measurements for the evaluation of human exposure in buildings
ISO/TS 14837-32:2015 Part 32: Measurement of dynamic properties of the ground
ISO 14839 Mechanical vibration - Vibration of rotating machinery equipped with active magnetic bearings
ISO 14839-1:2002 Part 1: Vocabulary
ISO 14839-2:2004 Part 2: Evaluation of vibration
ISO 14839-3:2006 Part 3: Evaluation of stability margin
ISO 14839-4:2012 Part 4: Technical guidelines
ISO/IEC 14840:1996 Information technology – 12.65 mm wide magnetic tape cartridge for information interchange – Helical scan recording – Data-D3-1 format
ISO/IEC 14841:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call offer supplementary service
ISO/IEC 14842:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Do not disturb and do not disturb override supplementary services
ISO/IEC 14843:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Offer supplementary service
ISO/IEC 14844:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Do Not Disturb and Do Not Disturb Override supplementary services
ISO/IEC 14845:1996 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call intrusion supplementary service
ISO/IEC 14846:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Intrusion supplementary service
ISO 14855 Determination of the ultimate aerobic biodegradability of plastic materials under controlled composting conditions – Method by analysis of evolved carbon dioxide
ISO 15000-5:2014 Part 5: Core Components Specification (CCS)
ISO 15001:2010 Anaesthetic and respiratory equipment – Compatibility with oxygen
ISO 15002:2008 Flow-metering devices for connection to terminal units of medical gas pipeline systems
ISO 15004 Ophthalmic instruments – Fundamental requirements and test methods
ISO 15004-1:2006 Part 1: General requirements applicable to all ophthalmic instruments
ISO 15004-2:2007 Part 2: Light hazard protection
ISO 15006:2011 Road vehicles – Ergonomic aspects of transport information and control systems – Specifications for in-vehicle auditory presentation
ISO 15010:1998 Disposable hanging devices for transfusion and infusion bottles – Requirements and test methods
ISO 15016:2015 Ships and marine technology - Guidelines for the assessment of speed and power performance by analysis of speed trial data
ISO/IEC 15018:2004 Information technology - Generic cabling for homes
ISO 15022 Securities – Scheme for messages (Data Field Dictionary)
ISO/IEC 15026 Systems and software engineering—Systems and software assurance
ISO/IEC 15026-1:2013 Part 1: Concepts and vocabulary
ISO/IEC 15026-2:2011 Part 2: Assurance case
ISO/IEC 15026-3:2015 Part 3: System integrity levels
ISO/IEC 15026-4:2012 Part 4: Assurance in the life cycle
ISO 15031 Road vehicles – Communication between vehicle and external equipment for emissions-related diagnostics
ISO 15031-2:2010 Part 2: Guidance on terms, definitions, abbreviations and acronyms
ISO 15032:2000 Prostheses – Structural testing of hip units
ISO/IEC 15041:1997 Information technology - Data interchange on 90 mm optical disk cartridges - Capacity: 640 MB per cartridge
ISO/IEC TR 15044:2000 Information technology - Terminology for the Home Electronic System (HES)
ISO/IEC 15045 Information technology - Home Electronic System (HES) gateway
ISO/IEC 15045-1:2004 Part 1: A residential gateway model for HES
ISO/IEC 15045-2:2012 Part 2: Modularity and protocol
ISO/IEC 15049:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Advice of charge supplementary services
ISO/IEC 15050:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Advice Of Charge supplementary services
ISO/IEC 15051:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Recall supplementary service
ISO/IEC 15052:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Recall supplementary service
ISO/IEC 15053:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call Interception additional network feature
ISO/IEC 15054:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Interception additional network feature
ISO/IEC 15055:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Transit counter additional network feature
ISO/IEC 15056:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Transit counter additional network feature
ISO/IEC 15067 Information technology - Home Electronic System (HES) application model[Note 4]
ISO/IEC TR 15067-2:1997 Part 2: Lighting model for HES
ISO/IEC 15067-3:2012 Part 3: Model of a demand-response energy management system for HES
ISO/IEC TR 15067-3-2:2016 Part 3-2: GridWise interoperability context-setting framework
ISO/IEC TR 15067-4:2001 Part 4: Security System for HES
ISO 15075:2003 Transport information and control systems – In-vehicle navigation systems – Communications message set requirements
ISO 15081:2011 Agricultural equipment - Graphical symbols for pressurized irrigation systems
ISO 15118 Road vehicles - Vehicle to grid communication interface
ISO 15137:2005 Self-adhesive hanging devices for infusion bottles and injection vials – Requirements and test methods
ISO 15142 Implants for surgery – Metal intramedullary nailing systems
ISO 15142-1:2003 Part 1: Intramedullary nails
ISO 15142-2:2003 Part 2: Locking components
ISO 15142-3:2003 Part 3: Connection devices and reamer diameter measurements
ISO 15143 Earth-moving machinery and mobile road construction machinery – Worksite data exchange
ISO 15143-1:2010 Part 1: System architecture
ISO 15143-2:2010 Part 2: Data dictionary
ISO/TS 15143-3:2016 Part 3: Telematics data
ISO/IEC 15145:1997 Information technology - Programming languages - FORTH
ISO/IEC 15149:2011 Information technology – Telecommunications and information exchange between systems – Magnetic field area network (MFAN)
ISO/IEC 15149-1:2014 Part 1: Air interface
ISO/IEC 15149-2:2015 Part 2: In-band Control Protocol for Wireless Power Transfer
ISO/IEC 15149-3:2016 Part 3: Relay Protocol for Extended Range
ISO/IEC 15149-4:2016 Part 4: Security Protocol for Authentication
ISO 15174:2012 Milk and milk products – Microbial coagulants – Determination of total milk-clotting activity
ISO 15188:2001 Project management guidelines for terminology standardization
ISO 15189:2012 Medical laboratories – Particular requirements for quality and competence
ISO/IEC 15200:1996 Information technology - Adaptive Lossless Data Compression algorithm (ALDC)
ISO/IEC 15205:2000 SBus - Chip and module interconnect bus
ISO 15212 Oscillation-type density meters
ISO 15212-1:1998 Part 1: Laboratory instruments
ISO 15212-2:2002 Part 2: Process instruments for homogeneous liquids
ISO 15213:2003 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of sulfite-reducing bacteria growing under anaerobic conditions
ISO 15214:1998 Microbiology of food and animal feeding stuffs – Horizontal method for the enumeration of mesophilic lactic acid bacteria – Colony-count technique at 30 degrees C
ISO 15216 Microbiology of the food chain - Horizontal method for determination of hepatitis A virus and norovirus using real-time RT-PCR[Note 4]
ISO 15216-1:2017 Part 1: Method for quantification
ISO/TS 15216-2:2013 Part 2: Method for qualitative detection
ISO 15223 Medical devices – Symbols to be used with medical device labels, labelling, and information to be supplied
ISO 15223-1:2016 Part 1: General requirements
ISO 15223-2:2010 Part 2: Symbol development, selection and validation
ISO 15225:2016 Medical devices – Quality management – Medical device nomenclature data structure
ISO 15226:1999 Technical product documentation – Life cycle model and allocation of documents
ISO 15230:2007 Mechanical vibration and shock – Coupling forces at the man–machine interface for hand-transmitted vibration
ISO/TR 15235:2001 Preparation of steel substrates before application of paints and related products - Collected information on the effect of levels of water-soluble salt contamination
ISO 15241:2012 Rolling bearings - Symbols for physical quantities
ISO 15253:2000 Ophthalmic optics and instruments – Optical devices for enhancing low vision
ISO 15254:2009 Ophthalmic optics and instruments – Electro-optical devices for enhancing low vision
ISO 15261:2004 Vibration and shock generating systems - Vocabulary
ISO/IEC TR 15285:1998 Information technology - An operational model for characters and glyphs
ISO/IEC 15286:1999 Information technology - 130 mm optical disk cartridges for information interchange - Capacity: 5.2 GB per cartridge
ISO/IEC/IEEE 15288:2015 Systems and software engineering – System life cycle processes
ISO/IEC/IEEE 15289:2017 Systems and software engineering – Content of life-cycle information items (documentation)
ISO/IEC TR 15294:2000 Information technology – Methods for data flow control at synchronous and asynchronous DTE-DCE interfaces
ISO 15296:2004 Gas welding equipment - Vocabulary - Terms used for gas welding equipment
ISO/TR 15300:2001 Dentistry - Application of OSI clinical codification to the classification and coding of dental products
ISO/IEC 15307:1997 Information technology – Data interchange on 12.7 mm 128-track magnetic tape cartridges – DLT 4 format
ISO 15309:2013 Implants for surgery – Differential scanning calorimetry of poly ether ether ketone (PEEK) polymers and compounds for use in implantable medical devices
ISO/PAS 15339 Graphic technology - Printing from digital data across multiple technologies
ISO/PAS 15339-1:2015 Part 1: Principles
ISO/PAS 15339-2:2015 Part 2: Characterized reference printing conditions, CRPC1-CRPC7
ISO 15367 Lasers and laser-related equipment - Test methods for determination of the shape of a laser beam wavefront
ISO 15367-1:2003 Part 1: Terminology and fundamental aspects
ISO 15367-2:2005 Part 2: Shack-Hartmann sensors
ISO 15368:2001 Optics and optical instruments - Measurement of reflectance of plane surfaces and transmittance of plane parallel elements
ISO 15374:1998 Implants for surgery – Requirements for production of forgings
ISO 15375:2010 Medical infusion bottles – Suspension devices for multiple use – Requirements and test methods
ISO/TR 15377:2007 Measurement of fluid flow by means of pressure-differential devices – Guidelines for the specification of orifice plates, nozzles and Venturi tubes beyond the scope of ISO 5167
ISO 15378:2017 Primary packaging materials for medicinal products – Particular requirements for the application of ISO 9001:2015, with reference to good manufacturing practice (GMP)
ISO 15394:2009 Packaging - Bar code and two-dimensional symbols for shipping, transport and receiving labels
ISO 15403 Natural gas – Natural gas for use as a compressed fuel for vehicles
ISO 15403-1:2006 Part 1: Designation of the quality
ISO/TR 15403-2:2006 Part 2: Specification of the quality
ISO/IEC 15404:2000 Information technology – Office machines – Minimum information to be included in specification sheets – Facsimile equipment
ISO/IEC 15408 Information technology – Security techniques – Evaluation criteria for IT security
ISO/IEC 15408-1:2009 Part 1: Introduction and general model
ISO/IEC 15408-2:2008 Part 2: Security functional components
ISO/IEC 15408-3:2008 Part 3: Security assurance components
ISO/IEC TR 15410:1998 Information technology – Telecommunications and information exchange between systems – PISN mobility-general principles and services aspects
ISO/IEC 15411:1999 Information technology - Segmented keyboard layouts
ISO/IEC 15412:1999 Information technology - Portable computer keyboard layouts
ISO/IEC TR 15413:2001 Information technology - Font services - Abstract service definition
ISO/IEC 15414:2015 Information technology - Open data processing - Reference Model - Enterprise Language
ISO/IEC 15415:2011 Information technology - Automatic identification and data capture techniques - Bar code symbol print quality test specification - Two-dimensional symbols
ISO/IEC 15416:2016 Automatic identification and data capture techniques - Bar code print quality test specification - Linear symbols
ISO/IEC 15417:2007 Information technology - Automatic identification and data capture techniques - Code 128 bar code symbology specification
ISO/IEC 15418:2016 Information technology - Automatic identification and data capture techniques - GS1 Application Identifiers and ASC MH10 Data Identifiers and maintenance
ISO/IEC 15419:2009 Information technology - Automatic identification and data capture techniques - Bar code digital imaging and printing performance testing
ISO/IEC 15420:2009 Information technology - Automatic identification and data capture techniques - EAN/UPC bar code symbology specification
ISO/IEC 15421:2010 Information technology - Automatic identification and data capture techniques - Bar code master test specifications
ISO/IEC 15423:2009 Information technology - Automatic identification and data capture techniques - Bar code scanner and decoder performance testing
ISO/IEC 15424:2008 Information technology - Automatic identification and data capture techniques - Data Carrier Identifiers (including Symbology Identifiers)
ISO/IEC 15426 Information technology - Automatic identification and data capture techniques - Bar code verifier conformance specification
ISO/IEC 15426-1:2006 Part 1: Linear symbols
ISO/IEC 15426-2:2015 Part 2: Two-dimensional symbols
ISO/IEC 15428:1999 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Wireless Terminal Location Registration supplementary service and Wireless Terminal Information Exchange additional network feature
ISO/IEC 15429:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Wireless Terminal Location Registration supplementary service and Wireless Terminal Information exchange additional network feature
ISO/IEC 15430:1999 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Wireless terminal call handling additional network features
ISO/IEC 15431:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Wireless terminal call handling additional network features
ISO/IEC 15432:1999 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Wireless Terminal Authentication supplementary services (WTAT and WTAN)
ISO/IEC 15433:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Wireless Terminal Authentication supplementary services
ISO/IEC 15434:2006 Information technology – Automatic identification and data capture techniques – Syntax for high-capacity ADC media
ISO/IEC 15437:2001 Information technology - Enhancements to LOTOS (E-LOTOS)
ISO/IEC 15438:2015 Information technology - Automatic identification and data capture techniques - PDF417 bar code symbology specification
ISO/IEC TR 15440:2016 Information technology - Future keyboards and other input devices and entry methods
ISO/IEC 15457-1:2008 Part 1: Physical characteristics
ISO/IEC 15457-2:2007 Part 2: Magnetic recording technique
ISO/IEC 15457-3:2008 Part 3: Test methods
ISO/IEC 15459 Information technology - Automatic identification and data capture techniques - Unique identification
ISO/IEC 15459-1:2014 Part 1: Individual transport units
ISO/IEC 15459-2:2015 Part 2: Registration procedures
ISO/IEC 15459-3:2014 Part 3: Common rules
ISO/IEC 15459-4:2014 Part 4: Individual products and product packages
ISO/IEC 15459-5:2014 Part 5: Individual returnable transport items (RTIs)
ISO/IEC 15459-6:2014 Part 6: Groupings
ISO 15469:2004 Spatial distribution of daylight – CIE standard general sky
ISO/IEC 15474 Information technology - CDIF framework
ISO/IEC 15474-1:2002 Part 1: Overview
ISO/IEC 15474-2:2002 Part 2: Modelling and extensibility
ISO/IEC 15475 Information technology - CDIF transfer format
ISO/IEC 15475-1:2002 Part 1: General rules for syntaxes and encodings
ISO/IEC 15475-2:2002 Part 2: Syntax SYNTAX.1
ISO/IEC 15475-3:2002 Part 3: Encoding ENCODING.1
ISO/IEC 15476 Information technology - CDIF semantic metamodel
ISO/IEC 15476-1:2002 Part 1: Foundation
ISO/IEC 15476-2:2002 Part 2: Common
ISO/IEC 15476-3:2006 Part 3: Data definitions
ISO/IEC 15476-4:2005 Part 4: Data models
ISO/IEC 15476-6:2006 Part 6: State/event models
ISO 15480:2019 Fasteners — Hexagon washer head drilling screws with tapping screw thread
ISO 15481:1999 Cross recessed pan head drilling screws with tapping screw thread
ISO 15482:1999 Cross recessed countersunk head drilling screws with tapping screw thread
ISO 15483:1999 Cross recessed raised countersunk head drilling screws with tapping screw thread
ISO/IEC 15485:1997 Information technology - Data interchange on 120 mm optical disk cartridges using phase change PD format - Capacity: 650 MB per cartridge
ISO/IEC 15486:1998 Information technology - Data interchange on 130 mm optical disk cartridges of type WORM (Write Once Read Many) using irreversible effects - Capacity: 2.6 GB per cartridge
ISO 15489 Information and documentation – Records management
ISO 15489-1:2016 Part 1: Concepts and principles
ISO/TR 15489-2:2001 Part 2: Guidelines [Withdrawn, no replacement]
ISO/IEC 15498:1997 Information technology - Data interchange on 90 mm optical disk cartridges - HS-1 format - Capacity: 650 MB per cartridge
ISO/IEC 15504 Information technology – Process assessment
ISO/IEC 15505:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Message Waiting Indication supplementary service
ISO/IEC 15506:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Message Waiting Indication supplementary service
ISO/IEC 15507:1997 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – PINX clock synchronization
ISO 15519 Specification for diagrams for process industry
ISO 15519-1:2010 Part 1: General rules
ISO 15519-2:2015 Part 2: Measurement and control
ISO/IEC 15521:1998 Information technology – 3.81 mm wide magnetic tape cartridge for information interchange – Helical scan recording – DDS-3 format using 125 m length tapes
ISO 15529:2010 Optics and photonics - Optical transfer function - Principles of measurement of modulation transfer function (MTF) of sampled imaging systems
ISO 15530 Geometrical product specifications (GPS) – Coordinate measuring machines (CMM): Technique for determining the uncertainty of measurement
ISO/TS 15530-1:2013 Part 1: Overview and metrological characteristics
ISO 15530-3:2011 Part 3: Use of calibrated workpieces or measurement standards
ISO/TS 15530-4:2008 Part 4: Evaluating task-specific measurement uncertainty using simulation
ISO 15583:2005 Ships and marine technology - Maritime standards list
ISO/TR 15599:2002 Digital codification of dental laboratory procedures
ISO 15614 Specification and qualification of welding procedures for metallic materials – Welding procedure test
ISO 15622:2010 Intelligent transport systems – Adaptive Cruise Control systems – Performance requirements and test procedures
ISO 15623:2013 Intelligent transport systems – Forward vehicle collision warning systems – Performance requirements and test procedures
ISO/TS 15624:2001 Transport information and control systems – Traffic Impediment Warning Systems (TIWS) – System requirements
ISO 15628:2013 Intelligent transport systems – Dedicated short range communication (DSRC) – DSRC application layer
ISO 15638 Intelligent transport systems – Framework for cooperative telematics applications for regulated commercial freight vehicles (TARV)[Note 4]
ISO 15638-1:2012 Part 1: Framework and architecture
ISO 15638-2:2013 Part 2: Common platform parameters using CALM
ISO 15638-3:2013 Part 3: Operating requirements, 'Approval Authority' procedures, and enforcement provisions for the providers of regulated services
ISO 15638-5:2013 Part 5: Generic vehicle information
ISO 15638-6:2014 Part 6: Regulated applications
ISO 15638-7:2013 Part 7: Other applications
ISO 15638-8:2014 Part 8: Vehicle access management
ISO/TS 15638-9:2013 Part 9: Remote electronic tachograph monitoring (RTM)
ISO 15638-10:2017 Part 10: Emergency messaging system/eCall
ISO 15638-11:2014 Part 11: Driver work records
ISO 15638-12:2014 Part 12: Vehicle mass monitoring
ISO/TS 15638-13:2015 Part 13: "Mass" information for jurisdictional control and enforcement
ISO 15638-14:2014 Part 14: Vehicle access control
ISO 15638-15:2014 Part 15: Vehicle location monitoring
ISO 15638-16:2014 Part 16: Vehicle speed monitoring
ISO 15638-17:2014 Part 17: Consignment and location monitoring
ISO 15638-18:2017 Part 18: ADR (Dangerous Goods)
ISO/TS 15638-19:2013 Part 19: Vehicle parking facilities (VPF)
ISO 15642:2003 Road construction and maintenance equipment – Asphalt mixing plants – Terminology and commercial specifications
ISO 15662:2006 Intelligent transport systems – Wide area communication – Protocol management information
ISO 15664:2001 Acoustics – Noise control design procedures for open plant
ISO 15665:2003 Acoustics – Acoustic insulation for pipes, valves and flanges
ISO 15667:2000 Acoustics – Guidelines for noise control by enclosures and cabins
ISO 15674:2016 Cardiovascular implants and artificial organs – Hard-shell cardiotomy/venous reservoir systems (with/without filter) and soft venous reservoir bags
ISO 15675:2016 Cardiovascular implants and artificial organs – Cardiopulmonary bypass systems – Arterial blood line filters
ISO 15676:2016 Cardiovascular implants and artificial organs – Requirements for single-use tubing packs for cardiopulmonary bypass and extracorporeal membrane oxygenation (ECMO)
ISO 15686 Buildings and constructed assets – Service life planning
ISO 15688:2012 Road construction and maintenance equipment – Soil stabilizers – Terminology and commercial specifications
ISO 15689:2003 Road construction and maintenance equipment – Powder binder spreaders – Terminology and commercial specifications
ISO/IEC 15718:1998 Information technology – Data interchange on 8 mm wide magnetic tape cartridge – Helical scan recording – HH-1 format
ISO/IEC 15731:1998 Information technology – 12.65 mm wide magnetic tape cassette for information interchange – Helical scan recording – DTF-1 format
ISO 15744:2002 Hand-held non-electric power tools – Noise measurement code – Engineering method (grade 2)
ISO 15747:2010 Plastic containers for intravenous injections
ISO 15752:2010 Ophthalmic instruments – Endoilluminators – Fundamental requirements and test methods for optical radiation safety
ISO/IEC 15757:1998 Information technology – Data interchange on 8 mm wide magnetic tape cartridge – Helical scan recording – DA-2 format
ISO 15759:2005 Medical infusion equipment – Plastics caps with inserted elastomeric liner for containers manufactured by the blow-fill-seal (BFS) process
ISO/TS 15768:2000 Measurement of liquid velocity in open channels – Design, selection and use of electromagnetic current meters
ISO 15769:2010 Hydrometry – Guidelines for the application of acoustic velocity meters using the Doppler and echo correlation methods
ISO/IEC 15771:1998 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Common information additional network feature
ISO/IEC 15772:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Common Information additional network feature
ISO/IEC 15773:1998 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Inter-exchange signalling protocol – Transit counter additional network feature
ISO/IEC 15776:2001 VME64bus - Specification
ISO/IEC 15780:1998 Information technology – 8 mm wide magnetic tape cartridge – Helical scan recording – AIT-1 format
ISO 15782 Certificate management for financial services[Note 4]
ISO 15782-1:2009 Part 1: Public key certificates
ISO 15782-2:2001 Part 2: Certificate extensions
ISO 15783:2002 Seal-less rotodynamic pumps – Class II – Specification
ISO 15784 Intelligent transport systems (ITS) – Data exchange involving roadside modules communication
ISO 15784-1:2008 Part 1: General principles and documentation framework of application profiles
ISO 15784-2:2015 Part 2: Centre to field device communications using SNMP
ISO 15784-3:2008 Part 3: Application profile-data exchange (AP-DATEX)
ISO 15785:2002 Technical drawings – Symbolic presentation and indication of adhesive, fold and pressed joints
ISO 15786:2008 Technical drawings – Simplified representation and dimensioning of holes
ISO 15787:2016 Technical product documentation – Heat-treated ferrous parts – Presentation and indications
ISO 15798:2013 Ophthalmic implants – Ophthalmic viscosurgical devices
ISO/IEC 15802 Information technology – Telecommunications and information exchange between systems – Local and metropolitan area networks – Common specifications
ISO/IEC 15802-1:1995 Part 1: Medium Access Control (MAC) service definition
ISO/IEC 15802-3:1998 Part 3: Media Access Control (MAC) Bridges
ISO/IEC 15816:2002 Information technology - Security techniques - Security information objects for access control
ISO 15836:2009 Information and documentation – The Dublin Core metadata element set
ISO 15836-1:2017 Part 1: Core elements
ISO/TR 15847:2008 Graphic technology - Graphical symbols for printing press systems and finishing systems, including related auxiliary equipment
ISO 15849:2001 Ships and marine technology – Guidelines for implementation of a fleet management system network
ISO/IEC 15851:1999 Information technology - Communication protocol - Open MUMPS Interconnect
ISO/IEC 15852:1999 Information technology - Programming languages - M Windowing API
ISO 15867:2003 Intermediate bulk containers (IBCs) for non-dangerous goods – Terminology
ISO 15870:2000 Powered industrial trucks - Safety signs and hazard pictorials - General principles
ISO 15878:2008 Road construction and maintenance equipment – Asphalt pavers – Terminology and commercial specifications
ISO/IEC 15895:1999 Information technology – Data interchange on 12.7 mm 128-track magnetic tape cartridges – DLT 3-XT format
ISO/IEC 15896:1999 Information technology – Data interchange on 12.7 mm 208-track magnetic tape cartridges – DLT 5 format
ISO/IEC 15897:2011 Information technology - User interfaces - Procedures for the registration of cultural elements
ISO 15883-1:2006 specifies general performance requirements for washer-disinfectors (WD) and their accessories that are intended to be used for cleaning and disinfection of re-usable medical devices and other articles used in the context of medical, dental, pharmaceutical and veterinary practice.
ISO/IEC 15898:1998 Information technology - Data interchange on 356 mm optical disk cartridges - WORM, using phase change technology - Capacity: 14.8 GB and 25 GB per cartridge
ISO/IEC 15899:1998 Information technology – Telecommunications and information exchange between systems – Broadband Private Integrated Services Network – Service description – Broadband connection oriented bearer services
ISO 15901-2:2022 Pore size distribution and porosity of solid materials by mercury porosimetry and gas adsorption — Part 2: Analysis of nanopores by gas adsorption
ISO 15902:2004 Optics and photonics - Diffractive optics - Vocabulary
ISO/IEC 15909 Systems and software engineering - High-level Petri nets
ISO/IEC 15909-1:2004 Part 1: Concepts, definitions and graphical notation
ISO/IEC 15953:1999 Information technology – Open Systems Interconnection – Service definition for the Application Service Object Association Control Service Element
ISO/IEC 15954:1999 Information technology – Open Systems Interconnection – Connection-mode protocol for the Application Service Object Association Control Service Element
ISO/IEC 15955:1999 Information technology – Open Systems Interconnection – Connectionless protocol for the Application Service Object Association Control Service Element
ISO/IEC 15961 Information technology - Radio frequency identification (RFID) for item management: Data protocol
ISO/IEC 15961-1:2013 Part 1: Application interface
ISO/IEC 15961-4:2016 Part 4: Application interface commands for battery assist and sensor functionality
ISO/IEC 15962:2013 Information technology - Radio frequency identification (RFID) for item management - Data protocol: data encoding rules and logical memory functions
ISO/IEC 15963:2009 Information technology - Radio frequency identification for item management - Unique identification for RF tags
ISO 15970 Natural gas – Measurement of properties – Volumetric properties: density, pressure, temperature and compression factor
ISO 15985:2004 Plastics – Determination of the ultimate anaerobic biodegradation and disintegration under high-solids anaerobic-digestion conditions – Method by analysis of released biogas
ISO/IEC 15991:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Specification, functional model and information flows – Call Priority Interruption and Call Priority Interruption Protection supplementary services
ISO/IEC 15992:2003 Information technology – Telecommunications and information exchange between systems – Private Integrated Services Network – Inter-exchange signalling protocol – Call Priority Interruption and Call Priority Interruption Protection supplementary services
