Lake freighters, or lakers, are bulk carriers operating on the Great Lakes of North America. These vessels are traditionally called boats, although classified as ships.^[1][2] Freighters typically have a long, narrow hull, a raised pilothouse, and the engine located at the rear of the ship.

Lakers have been used since the late 19th century to haul raw material from docks in the Great Lakes and St Lawrence Seaway regions to the industrial centers of Ontario, Quebec, and the American Midwest. The navigation season typically begins in late March and ends mid-January due to the formation of ice on the lakes.^[3]

The largest lake freighters can travel up to 15 knots (28 km/h; 17 mph)^[4] and can carry as much as 78,850 long tons (80,120 t) of bulk cargo.^{[citation needed]}

SS Edmund Fitzgerald, which sank in 1975, became widely known as the largest and most recent major vessel to be wrecked on the Great Lakes.

The lake freighter's recognizable design emerged from many years of innovation in Great Lakes shipping. By the late 1860s, most bulk cargo was still carried by unpowered barges and sailing ships. Often, these ships had accessible deck hatches, useful for loading and unloading cargo. Around this time, passenger steamboats were gaining popularity for their steam-powered shipping abilities, which were faster and more reliable.^[5]

In 1869, the wood-hulled R. J. Hackett was launched. It was designed specifically for the iron ore trade and had an experimental design that would soon set the standard for subsequent bulk carriers on the Great Lakes. R. J. Hackett featured a raised pilothouse at the bow, situated on top of a set of cabins, and a boxy hull to maximize cargo capacity. Between the raised forecastle and engine funnel at the stern was a long, unbroken deck lined with hatches spaced 24 feet (7.3 m) apart (to match the chutes of the gravity ore dock in Marquette, Michigan).^[5][6]

The falls of the St. Marys River forced ships to portage their cargo 1.25 miles (2.01 km) around the falls. In an effort to make shipping more efficient and profitable, Michigan representatives appealed to the federal government for funding to build a canal. In 1855, the Michigan State Locks (now Soo Locks) opened, allowing vessels to keep up with demands for iron ore from further east. This would fuel the development of bulk carriers on the Great Lakes.^[8]

The early lakers often had a wooden hull, or a composite hull of an oak frame wrapped in iron plating. With the depletion of high quality timber near the lake shore, shipbuilders increasingly utilized metal hulls. In 1881 and 1882, the first entirely iron-hulled freighters, Brunswick and Onoko, were launched. Around this time, steel was quickly becoming a standard hull material as a result of the Bessemer process making it more affordable, and the first steel-hulled freighter, Spokane, was launched in 1886. Soon both iron and composite hulls were discontinued, while wood was used for smaller vessels into the early 1900s.^[8][5][9]

An early variation on the lake freighter was the whaleback boat, designed by Alexander McDougall. These had cigar-shaped bodies that barely rose out of the water when fully loaded, and carried bulk cargo on the lakes from 1888 through 1970.^[10][11]

The early lake freighters required cargo to be manually unloaded, or with assistance from unloading machinery at the docks.^[12] In 1902, Hennepin was the first ship to be retrofitted with self-unloading equipment, allowing its cargo to be landed in a fraction of the time.^[5]

Around 1916, 600-foot (180 m) vessels more or less became the standard size.^[13]

After World War II, several ocean freighters and tankers were transported to the Great Lakes and converted to bulk carriers as a way to acquire ships cheaply. The oil tanker Chiwawa became the bulk freighter MV Lee A. Tregurtha^[14] In addition, the freighter Outer Island was originally commissioned as LCT-203 for use as a tank landing craft during World War II.^[15]

In the mid-20th century, 300 lakers worked the lakes, but by the early 21st century, there were fewer than 140 active lakers.^[16] By the 1990s, older and smaller self-unloaders and straight-deck freighters converted into tug-barges.^[4]

Name	Launched	Notes
R. J. Hackett	1869	First of the lake freighters. R. J. Hackett burned at Whaleback Shoal in 1905.[6]
Brunswick	1881	First iron-hulled lake freighter.
Onoko	1882	Followed Brunswick in advancing the design of what would become the Great Lakes boat
Spokane	1886	First steel-hulled lake freighter.
Hennepin	1888	Originally Str. George H. Dyer, it was the first ship retrofitted to have self-unloading equipment in 1902. Hennepin sank in a storm in 1927.[5]
Wyandotte	1908	First ship built as a self-unloader.
S. T. Crapo	1927	The last coal-fired freighter on the Great Lakes. In 1995, the ship's boiler was converted to be oil-firing. The 95-year-old ship was scrapped in 2022.[17]
Stewart J. Cort	1972	First 1,000-footer lake freighter. Originally Hull 1173 and nicknamed "Stubby", the ship only consisted of the bow and stern sections. It was then sailed to Erie, Pennsylvania and lengthened by over 700 feet.[2][18]
Henry Ford II, Benson Ford	1924	First lake freighters with diesel engines.[19]
Feux Follets	1967	Last ship built with a steam turbine.
Presque Isle	1973	The first 1,000-foot integrated tugboat/barge and the second 1,000 footer overall.[20]
James R. Barker	1976	First standard construction 1,000-footer.
Edwin H. Gott	1978	The most powerful freighter when launched with two engines rated at 19,500 brake horsepower (14,500 kW) each.[21][22] In 2011, it was repowered with two engines rated at 9,650 bhp (7,200 kW) each.[23]
Paul R. Tregurtha	1981	The largest ship currently on the lakes at 1,013.5 feet (308.9 m).[24]

The many lake freighters operating on the Great Lakes can be differentiated by how they are used. This may be where the ships may be where they work, their design, their size, or other factors. The ships are not always exclusive to one category. These types include:

• Laker – a bulk carrier operating primarily in the upper Great Lakes.^[25]
• Longboats – lakers noted for their slender appearance.
• Oreboat/Ironboat – a bulk carrier used primarily to transport iron ore and taconite pellets.^[25]
• Saltie – ocean-going, seawaymax vessels that access the Great Lakes through the Saint Lawrence Seaway.^[26]
• Self-unloader – a lake freighter equipped with self-unloading gear.
• Stern-ender – a lake freighter with all cabins aft.
• Straight decker (bulker) – a freighter built without conveyors and cranes to offload cargo, instead using port facilities.^[27]
• Tug-barge - a bulk carrier created by pairing barges (former self-unloaders and straight-deckers) with a tugboat.^[4]

Some of the newer classes of lake freighters include:

• Equinox class – a new class of lake freighter, several of which entered service in the 2010s for Seaway Marine Transport, a division of Algoma Central. A class of vessel is created any time a new design is used to build a ship and is notable when multiple ships are built to the same design plans.^[28] The ships are used as dry-bulk lake freighters (two gearless bulk freighter and three self-unloading vessel).^[29] The first in the series, Algoma Equinox, was launched in 2013.
• Trillium class – a new class of lake freighter delivered for Canada Steamship Lines in 2012 (Baie St. Paul) and 2013 (Whitefish Bay, Thunder Bay and Baie Comeau). An additional pair (CSL Welland and CSL St. Laurent) began service on the Great Lakes in 2015.
• River class – a new class of lake freighter, one of which, Mark W. Barker, was commissioned by Interlake Steamship Company and entered service on July 1, 2022.^[30]

Average yearly cargoes 2018–2022
(million tons)

Iron ore	42.3
Coal	10.0
Limestone	22.9
Cement	3.4
Salt	0.9
Sand	0.5
Grain	0.3
Total	80.4
Source: "Cargo Reports – Year-in-Review 2023 – U.S.-Flag Vessels"[31]

In 2023, 81.4 million tons of cargo were shipped on the Great Lakes.^[32] The most common cargoes include taconite, limestone, grain, salt, coal, cement, gypsum, and sand.^[33] The cargo is carried in large contiguous holds, not packed into containers.

The iron ore transported from the upper Great Lakes primarily supplies the steel mills of the Midwest.^[34] Iron ore makes up a majority of the cargo shipped annually.^[35]

The 1940s saw the rise in the use of taconite pellets, as sources of higher quality ore diminished.^[36]

Other destinations include coal-fired power plants, highway department salt domes, and stone docks, where limestone is unloaded for the construction industry. U.S.-flagged freighters carried the largest portion of the trade, accounting for two-thirds of all cargo by weight. U.S. hulls carried most of the iron, limestone and cement, while Canadian boats carried most of the potash, and almost all of the salt and grain moved on the lakes.^{[citation needed]}

Destination harbors, ship sizes, and legal restrictions greatly affect the pattern of haulage. Large U.S. ships hauled most of the iron ore on the lakes (79%) from U.S. mines to U.S. mills. This reflects the requirement of the Jones Act, as well as the industry using large volumes of material while being concentrated in a few large harbor locations. Salt and Canadian grain can be hauled to numerous smaller ports of either country on smaller, mostly Canadian, ships, which can also enter the St. Lawrence Seaway with the Canadian ports of Montreal and Quebec City.^{[citation needed]}

Because of their deeper draft and freshwater's lower buoyancy, salties often take on partial loads.^[37] Conversely, the Seaway allows smaller lakers to access the Atlantic Ocean. The larger, newer ships are restricted to the upper lakes.

This section needs additional citations for verification. Please help improve this article by adding citations to reliable sources in this section. Unsourced material may be challenged and removed. (February 2021) (Learn how and when to remove this message)

Lakers feature a design distinct from their ocean-going counterparts. Because of the R. J. Hackett (1869), lake freighters typically had the bridge and associated superstructure at the bow. Additionally, a second island would be located over the engine room in the stern. In 1974, Algosoo was the final vessel designed this way.^{[citation needed]}

The more recently built lakers, like CSL Niagara, have a single large superstructure island at the stern.

Lake vessels are designed with the greatest block coefficient to maximize the vessel's size in the locks within the Great Lakes/St Lawrence Seaway system. Therefore, ship designers have favored bluff bows over streamlined bows.^{[citation needed]}

Another distinguishing feature of lake vessels versus ocean vessels is the cargo hatch configuration. On the lake vessels, the hatches are traditionally spaced 24 feet (7.3 m) apart. This configuration was needed to match the chutes at loading facilities.

Since Great Lakes waves do not achieve the great length or period of ocean waves, particularly compared to the waves' height, ships are in less danger of being suspended between two waves and breaking, so the ratio between the ship's length, beam and its depth can be larger than that of an ocean-going ship. The lake vessels generally have a 10:1 length to beam ratio, whereas ocean vessels are typically 7:1.^{[citation needed]}

The size of a lake freighter determines where it may work. The shallow draft imposed by the St. Marys River and Lake St. Clair restrict the cargo capacity of lakers.^{[citation needed]} Poe Lock at the Soo Locks is the largest deep lock at 1,200 feet (370 m) long and 110 feet (34 m) wide.^[38]

Many of the larger American ships are unable to navigate the locks of the St. Lawrence Seaway, which restricts vessel size to 740 feet (230 m) in length and 78 feet (24 m) in breadth.^[39] Seawaymax vessels are able to access the Great Lakes and the ocean. The Canadian fleet needs to travel to and from its major cities along the St. Lawrence Seaway, so the largest length for the Canadian vessels is 740 feet (230 m).^{[citation needed]}

Lake boats in the 600-and-700-foot (180 and 210 m) classes are more common, because of the limitations of the Welland Canal. These vessels vary greatly in configuration and cargo capacity, being capable of hauling between 10,000 and 40,000 tons per trip depending on the individual boat. These smaller boats serve smaller harbors around the lakes which have irregular need for their services.^{[citation needed]}

Another reason for the lack of larger Canadian vessels is legislative in nature. Larger ships on the lakes are generally used to transport American-mined ore bound for American mills. Because of the Jones Act of 1920, only American ships can carry ore from American mines to American mills in American ports; ergo, larger Canadian ships are not needed.^{[citation needed]}

These are the largest vessels on the lakes. A dozen were built between 1976 and 1981, and all remain in service today. These are all U.S.-flagged vessels between 1,000 and 1,013.5 feet (304.8 and 308.9 m) long, 105 feet (32 m) wide and of 56 ft (17 m) hull depth.

List of 1000-footers operating on the Great Lakes

Name	Type	Dimensions	Cargo capacity	Notes
American Integrity	Bulk freighter (self unloading)	1,000 ft × 105 ft	89,000 tons[citation needed]
American Spirit	Bulk freighter (self unloading)	1,004 ft × 105 ft	80,900 tons[citation needed]
American Century	Bulk freighter (self unloading)	1,000 ft × 105 ft	73,700 tons[citation needed]
Edgar B. Speer	Bulk freighter (self unloading)	1,004 ft × 105 ft	80,900 tons[citation needed]
Edwin H. Gott	Bulk freighter (self unloading)	1,000 ft × 105 ft		Most powerful engines on the Great Lakes.
James R. Barker	Bulk freighter (self unloading)	1,000 ft × 105 ft		First standard construction 1000-footer.
Mesabi Miner	Bulk freighter (self unloading)	1,004 ft × 105 ft
Paul R. Tregurtha	Bulk freighter (self unloading)	1,013.5 ft × 105 ft	68,000 tons[citation needed]	Longest vessel operating on the Great Lakes.[40]
Stewart J. Cort	Bulk freighter (self unloading)	1,000 ft × 105 ft		First 1000-footer on the lakes, and the only one with a forward pilothouse, following the traditional Great Lakes style.[41][42]
Burns Harbor	Bulk freighter (self unloading)	1,000 ft × 105 ft
Indiana Harbor	Bulk freighter (self unloading)	1,000 ft × 105 ft
Walter J. McCarthy Jr.	Bulk freighter (self unloading)	1,000 ft × 105 ft	80,120 tons[citation needed]	Highest cargo capacity (78,850 long tons [88,310 short tons; 80,120 t])[citation needed]
Presque Isle	Tug/barge combination	1,000 ft × 104 ft 7 in[clarification needed]		Only 1000 ft tug/barge combination unit

Modern lakers are usually designed and constructed for a 45-50 year old service life, outlasting ocean-going bulk carriers.^[43] As of 2023, ocean-going bulk freighters average an 11-year lifespan, due in part to the corrosive effects of saltwater.^[44][45]

Some of the lakers have been known to have long careers. The SS St. Marys Challenger launched in 1906 and worked independently until 2013. The St. Marys Challenger is still in service as a barge at 118 years old.^[46] E. M. Ford had one of the longest careers, having been built in 1898 until being sold for scrap in November 2008.^[47]

Some shipping companies are building new freighters to ply the waters of the Great Lakes. The following are new freighters in use or will be launched for use in the Great Lakes:

• Algoma Mariner – built by Chengxi Shipyard of Jiangyin, China, delivered in August 2011 for Algoma Central Corporation.^[48][29]

The Great Lakes have a long history of shipwrecks, groundings, storms, and collisions. From the 1679 sinking of Le Griffon with its cargo of furs to the 1975 loss of Edmund Fitzgerald, thousands of ships and thousands of lives have been lost, many involving vessels in the cargo trade. The Great Lakes Shipwreck Museum uses the approximates 6,000 ships and 30,000 lives lost.^[49] David D. Swayze has compiled a list which details over 4,750 well-documented shipwrecks, mostly of commercial vessels and a list of known names of over 5,000 victims of those sinkings.^[50] Maritime historian Mark Thompson reports that based on nautical records, nearly 6,000 shipwrecks on the Great Lakes occurred between 1878 and 1994, with about a quarter of those being listed as total losses with a total of 1,166 lives lost.^[51]

The most recent losses of modern lakers were:

• SS Edmund Fitzgerald, November 10, 1975, Lake Superior, 29 of 29 crew died, (unknown cause during a storm)
• SS Daniel J. Morrell, November 29, 1966, Lake Huron, 28 of 29 crew died, (split in half by hogging during a storm)
• SS Cedarville, May 7, 1965, Straits of Mackinac, 10 of 35 crew died, (collision with the saltie Topdalsfjord)
• SS Carl D. Bradley, November 18, 1958, Lake Michigan, 33 of 35 crew died, (split in half by hogging during a storm)^[52]
• SS Scotiadoc, June 20, 1953, Lake Superior, 1 of 29 crew died, (rammed by freighter Burlington in heavy fog)
• SS Henry Steinbrenner, May 11, 1953, Lake Superior, 17 of 31 crew died, (flooded after the cargo hatch covers were lost during a storm)
• SS Emperor, June 4, 1947, Lake Superior, 12 of 33 crew died, (ran into rocks at Isle Royale)
• SS Superior City, August 20, 1920, Lake Superior, 29 of 33 crew died, (collision with freighter Willis L. King)

The salties Prins Willem V and Monrovia sank in the Great Lakes during the 1950s; both in collisions with other ships. The saltie Francisco Morazan was a total loss after running aground off South Manitou Island on November 29, 1960. Another saltie Nordmeer grounded on Thunder Bay Island Shoal in November 1966, but before it could be refloated, it was further damaged in the same storm that sank the Morrell and was declared a total loss.

Ships on the lakes have been involved in many lesser incidents. Lakers have been subject to frequent groundings in ports and channels because of varying lake levels and silting, collisions with objects (such as the 1993 collision of the Indiana Harbor with the Lansing Shoals Light Station),^[51] icing in during winter trips and shipboard fires (including the unusual case in 2001 where a drawbridge ran into the Canadian grain carrier Windoc causing a fire). To prevent collisions and groundings, the Great Lakes are well-served with lighthouses and lights, and floating navigation aids. The U.S. Coast Guard and Canadian Coast Guard maintain stations around the Great Lakes including icebreakers and rescue helicopters. The U.S. Army Corps of Engineers and other agencies maintain the harbors and seaways to limit groundings by dredging and seawalling.^[53]

November was the traditional last month of shipping before the winter layup (and lake freeze-up). During November, much of the worst weather of the navigation season occurs which has resulted in a disproportionate number of accidents. One study shows that over half of all strandings and one-third of all vessels lost to foundering between 1900 and 1950 were lost during November.^[54]

This section needs additional citations for verification. Please help improve this article by adding citations to reliable sources in this section. Unsourced material may be challenged and removed. (February 2021) (Learn how and when to remove this message)

The most well-known lake freighter was Edmund Fitzgerald, which sank during a storm on Lake Superior on November 10, 1975. Gordon Lightfoot's ballad, "The Wreck of the Edmund Fitzgerald", publicized the incident.^[55] The Edmund Fitzgerald became the largest ship on the lakes at 729 feet (222 m) when launched in 1958. In addition to this, the ship was regarded for its "DJ Captain", Peter Pulcer, who frequently played music to entertain onlookers.^[56]

SS Arthur M. Anderson. launched in 1952, is known for having last contact with Edmund Fitzgerald and was the first vessel on-scene to search for the Edmund Fitzgerald.^[57]

MV Paul R. Tregurtha currently holds the title "Queen of the Lakes" as the largest ship on the lakes since launching in 1981. The modern stern-ender was first launched William J. Delancy and measures 1013.5 feet (308.9 m).^[58]

Onoko was the second iron-hulled laker, launched in 1882. At 302 ft, Onoko was the longest ship on the lakes and became the first bulk carrier to hold the unofficial title of "Queen of the Lakes". The title that has been passed down to record-breaking lake freighters since. SS Carl D. Bradley held the title for 22 years, longer than any other laker of the classic design.^{[citation needed]} Ford Motor Company's Henry Ford II and Benson Ford of 1924 were the first lakeboats with diesel engines.^[59] The Canadian grainboat Feux-Follets of 1967 was the last laker built with a steam turbine on the lakes.

Wilfred Sykes (1949 – 678 ft, 207 m) is considered to be the first of the modern lakers, and when converted to a self-unloader in 1975 was the first to have the equipment mounted aft. Since then all self-unloading equipment has been mounted aft. Algoisle (formerly Silver Isle) (1962 – 715.9 ft, 218.2 m) was the first modern laker built with all cabins aft (a "stern-ender"), following the lead of ocean-going bulk carriers and reprising a century old form used by little river steam barges and the whalebacks. Algosoo (1974–2015 730 ft, 220 m) was the last laker built in the classic style.^{[citation needed]}

Also of note is the steamer Edward L. Ryerson, widely known for her artistic design and being the only remaining straight-decker still in active service on the US side of the Great Lakes.^{[citation needed]} In mid 2006, Edward L. Ryerson was fitted out and put into service following a long-term lay-up that began in 1998. Edward L. Ryerson has been in long-term layup since 2009.^[60]

The William G. Mather was first built in 1925 and served as the Cleveland-Cliffs Iron Company's flagship until 1980. In 1987, the ship was donated to the Great Lakes Historical Society for restoration and preservation. In 2005, the ship was moved to its present location at Cleveland's North Coast Harbor. Then, in 2006, the ship was acquired by the Great Lakes Science Center for use as a museum ship. The ship is available to tour seasonally.^[61][62]

The William A. Irvin served as the flagship of U.S. Steel's Great Lakes fleet from 1938 to 1975. The William A. Irvin was retired in 1978 and purchased eight years later by the Duluth Entertainment Convention Center and is available for touring.^[63][64]

The SS Meteor, the last surviving whaleback ship, floats as a museum less than a mile from where it was launched in Superior, Wisconsin. The ship is permanently land-berthed on Barker's Island.^[65]

Valley Camp launched as Louis W. Hill in 1917 and transported cargo until retiring in 1966. Two years later, in 1968, the ship arrived in Sault Ste. Marie Michigan on July 6, during the town's tri-centennial celebrations for use as a museum ship.^[66] The museum ship displays many relics of the sinking of Edmund Fitzgerald including two of Edmund Fitzgerald's mauled lifeboats.^[67]

The 118-year-old SS St. Mary's Challenger's pilothouse is set to be displayed in the National Museum of the Great Lakes' upcoming museum expansion.^[68]

The SS Col. James M. Schoonmaker (formerly Willis B. Boyer) floats in the Maumee River as a museum ship for the National Museum of the Great Lakes. When launched in 1911, it was the largest bulk freighter in the world.^[69] The Col. James M. Schoonmaker formerly served as a floating museum after being purchased by the City of Toledo, Ohio in 1987.^[70]

Lewis G. Harriman's bow and bow superstructure are preserved as a residence in DeTour, Michigan. The ship was christened as the SS John W. Boardman in 1923. In 1965, the John W. Boardman was renamed Lewis G. Harriman and used to store cement during the Poe Lock construction in Sault Ste. Marie, Michigan. The ship was sold for scrap 2003, but the pilothouse and hull of Lewis G. Harriman were saved and now are used as a residence along the lake shore.^[71]

John Sherwin, not sailed since 1981, is currently docked in DeTour, Michigan after conversion to a self-unloader and repowering was halted in November 2008.^[72]

The pilothouse of William Clay Ford is part of the Dossin Great Lakes Museum on Belle Isle.^[73] The pilothouse is open for tours and overlooks the Detroit River.

SS Ridgetown was partially sunk as a breakwater (with stack and cabins intact) near Toronto at Port Credit. It was built in 1905 and is one of the oldest surviving hulls on the lake. Its silhouette provides an example of the appearance of early 1900s lake freighters.

Benson Ford was the flagship of the Ford Motor Company fleet when launched in 1924. The forward cabin and pilothouse was moved in 1986 to a cliff on South Bass Island, near the village of Put-in-Bay, Ohio in Lake Erie. It has been a private island residence since 1999 and they offer tours on select dates.^[74][75]

Several other lakers nearly became museums, but were scrapped for lack of funding, political opposition, and other causes.

• SS Niagara: 1897-built freighter, later converted to a sand-sucker. Scrapped in 1997 by Liberty Iron & Metal of Erie, Pennsylvania, after a failed attempt to convert the ship into a museum in Erie. She had been saved from the scrapyard 11 years earlier.
• John Ericsson: The second-to-last whaleback freighter. John Ericsson was scrapped in 1969 in the city of Hamilton, Ontario. Politics, as was the case with Canadiana, played a central role in the loss of the ship.
• SS Seaway Queen: The Canadian straight decker Seaway Queen, formerly owned by Upper Lakes Shipping, and the setting for the movie version of David Mamet's play Lakeboat, was involved in an attempt to save the ship as a museum. In the end, the company failed to locate an organization that was capable and willing to preserve the ship and she was sold and scrapped in Alang, India, in 2004.
• J. B. Ford: 1904 freighter that survived the 1905 Mataafa storm and the Great Lakes Storm of 1913 with the last three-cycle reciprocating steam engine was too expensive to turn into a museum and was sent to Azcon Metals in Duluth to be scrapped in 2015.^[76]

• Boatnerd website
• Willis B. Boyer website
• William G. Mather website
• Valley Camp website
• Norisle website
• Great Lakes Naval Memorial & Museum – USS Silversides & USCGC McLane