PROFILPELAJAR.COM

Specifications
Specifications
Configuration:;
• Whyte	4-6-2
• UIC	2′C1′ h3
Gauge	4 ft 8+1⁄2 in (1,435 mm)
Leading dia.	3 ft 2 in (0.965 m)
Driver dia.	6 ft 2 in (1.880 m)
Trailing dia.	3 ft 8 in (1.118 m)
Wheelbase	60 ft 6 in (18.44 m)
• Engine	34 ft 4 in (10.46 m)
• Coupled	13 ft 0 in (3.96 m)
Length	71 ft 0.5 in (21.654 m)
Axle load	22 long tons (22.4 t; 24.6 short tons)
Loco weight	101 long tons (102.6 t; 113.1 short tons)
Total weight	160.5 long tons (163.1 t; 179.8 short tons)
Fuel type	Coal
Fuel capacity	9 long tons (9.1 t; 10.1 short tons)
Water cap.	5,000 imp gal (23,000 L; 6,000 US gal)
Firebox:
• Grate area	50 sq ft (4.6 m2)
Boiler pressure	250 psi (1.72 MPa)
Heating surface:
• Firebox	245 sq ft (22.8 m2)
• Tubes	1,212 sq ft (112.6 m2)
• Flues	1,005 sq ft (93.4 m2)
• Total surface	2,461 sq ft (228.6 m2)
Superheater:;
• Heating area	680 sq ft (63 m2)
Cylinders	Three
Cylinder size	19 in × 26 in (483 mm × 660 mm)
Valve gear	Walschaerts
Valve type	Piston valves

Type and origin
Type and origin
Power type	Steam
Designer	Arthur Peppercorn
Builder	Doncaster Works
Build date	1947–1948
Total produced	15

LNER Peppercorn Class A2
LNER Peppercorn Class A2
	60533 Happy Knight at Doncaster in 1953.
Power type
Type and origin
Power type	Steam
Designer	Arthur Peppercorn
Builder	Doncaster Works
Build date	1947–1948
Total produced	15
Configuration:;
Specifications
Configuration:;
• Whyte	4-6-2
• UIC	2′C1′ h3
Gauge	4 ft 8+1⁄2 in (1,435 mm)
Leading dia.	3 ft 2 in (0.965 m)
Driver dia.	6 ft 2 in (1.880 m)
Trailing dia.	3 ft 8 in (1.118 m)
Wheelbase	60 ft 6 in (18.44 m)
• Engine	34 ft 4 in (10.46 m)
• Coupled	13 ft 0 in (3.96 m)
Length	71 ft 0.5 in (21.654 m)
Axle load	22 long tons (22.4 t; 24.6 short tons)
Loco weight	101 long tons (102.6 t; 113.1 short tons)
Total weight	160.5 long tons (163.1 t; 179.8 short tons)
Fuel type	Coal
Fuel capacity	9 long tons (9.1 t; 10.1 short tons)
Water cap.	5,000 imp gal (23,000 L; 6,000 US gal)
Firebox:
• Grate area	50 sq ft (4.6 m2)
Boiler pressure	250 psi (1.72 MPa)
Heating surface:
• Firebox	245 sq ft (22.8 m2)
• Tubes	1,212 sq ft (112.6 m2)
• Flues	1,005 sq ft (93.4 m2)
• Total surface	2,461 sq ft (228.6 m2)
Superheater:;
• Heating area	680 sq ft (63 m2)
Cylinders	Three
Cylinder size	19 in × 26 in (483 mm × 660 mm)
Valve gear	Walschaerts
Valve type	Piston valves
Tractive effort
Performance figures
Tractive effort	40,430 lbf (179.84 kN)
Operators
Career
Operators	London and North Eastern Railway » British Railways
Class	LNER: A2
Power class	BR: 8P7F
Axle load class	Route Availability 9
Withdrawn	November 1962 - June 1963, April 1965 - December 1966
Disposition	One preserved; remainder scrapped

The London and North Eastern Railway (LNER) Peppercorn Class A2 is a class of steam locomotive designed for express passenger work by Arthur Peppercorn, the chief designer of the LNER after Edward Thompson. All save the first of the 15 built were constructed under British Railways after nationalisation in 1948. Only one example is preserved.

Design

The A2s were a development on the 6 ft 2 in driving wheel locomotives of Peppercorn's predecessor, Edward Thompson. Thompson's designs were rebuilds of preexisting Gresley designs, in addition to being constrained by wartime pressures. With a dilapidated locomotive and rolling stock fleet, Peppercorn designed his A2s to augment Thompson's designs and replace the aging Gresley locomotives.

Peppercorn's design was influenced greatly by Thompson's A2/3 design, although his design differed most obviously with the less stretched look. This was achieved by moving the outside cylinders forward over the leading truck and amending the steam ducts, shortening the smokebox and wheelbase while retaining the same cylinder and valve gear arrangement.^[1] However, this came at the cost of either discarding the Kylchap exhaust or the self-cleaning device in the smokebox, of which the former was omitted by the design team. A new smoke deflector design was fitted, although the omission of the Kylchap exhaust led to visibility issues during service.^[1] Some Gresley styled features returned in the form of the V-shaped cab and the 'Banjo Dome' steam collector.^[2] Much of the rest of the locomotive remained the same as the Thompson A2/3, utilising the same 250 psi (1.72 MPa) boiler with a total heating surface of 3141.04 sq-ft, heated by a 50 sq-ft grate, powering a 19in by 26in cylinder, controlled from an electrically lit cab. This gave a tractive effort of 40,430 lb all whilst staying in a maximum axle load of 22 tonnes. The boiler utilised a small percentage of nickel plate for the barrel, saving 7cwt without compromising integrity. ^[2]

Construction

The first of the Peppercorn A2s, No. 525 A.H.Peppercorn, was outshopped from Doncaster in December 1947 on the eve of nationalisation, and named after the designer of the class, Arthur Peppercorn. The first two of the class were turned out in LNER apple green livery, and this colour was also applied to the next 13 engines delivered between January and August 1948. Repainting in British Railways Brunswick green began the following year. Another 20 members of the class were also planned, but were put on hold and ultimately cancelled on 4 May 1948 after the 1948 Locomotive Exchanges.^[3]^[4] No. 60539 Bronzino emerged in August 1948 with Kylchap double blastpipe and chimney in place of the self-cleaning apparatus as an experiment, with Nos. 60526, 60529, 60532, 60533 and 60538 similarly modified in 1949.^[5]^[6]

LNER 1946 Nos	BR Nos	Year
525	60525	1947
526–531	60526–31	1948
	60532–39	1948

Performance

The class's 50 sq ft grate, a remnant of the P2 lineage (from both Thompson and Peppercorn) boilers, meant the A2's were capable of high power and endurance; however, with the exception of the Aberdeen road, there was little need for this large grate firebox in the postwar era, and as a result, on comparable duties the A2's were heavier on fuel than the Gresley machines which pre-dated them, but for outright power and haulage capability, they were the logical successor to the P2 class, and finally provided the answer the Edinburgh-Aberdeen route required. As a result, they were amongst the last multi-cylindered express steam locomotive classes to remain in service in the UK.

Stock list

Only No. 525 was built during LNER ownership, but 526-31 received LNER 1946 numbers. From 60532 onwards, the A2s received BR numbers from new, BR numbers being the LNER 1946 numbers with the addition of 60000. With the exception of No. 525, named after the last Chief Mechanical Engineer of the LNER, they were named after racehorses.

LNER No.	BR No.	Name	Entered Service	Withdrawn
525	60525	A.H. Peppercorn^[7]	December 1947	March 1963
526	60526	Sugar Palm	January 1948	November 1962
527	60527	Sun Chariot	January 1948	April 1965
528	60528	Tudor Minstrel	February 1948	June 1966
529	60529	Pearl Diver	February 1948	December 1962
530	60530	Sayajirao	March 1948	November 1966
531	60531	Bahram	March 1948	December 1962
-	60532	Blue Peter	March 1948	December 1966
-	60533	Happy Knight	April 1948	June 1963
-	60534	Irish Elegance	April 1948	December 1962
-	60535	Hornets Beauty	May 1948	June 1965
-	60536	Trimbush	May 1948	December 1962
-	60537	Bachelors Button	June 1948	December 1962
-	60538	Velocity	June 1948	November 1962
-	60539	Bronzino	August 1948	November 1962

Service

Initially, the A2s were based at depots the length of the East Coast Main Line, ranging from New England (Peterborough) in the south to Edinburgh's Haymarket. It is said that Edinburgh Haymarket and Aberdeen Ferryhill shed welcomed the engines in stark comparison to the Thompson A2/2 and A1/1.^[6] In 1949, five were put to work on the Edinburgh-Dundee-Aberdeen route and proved the ideal engines for its stiff gradients and sharp curvature. The A2s also worked to Perth, Glasgow, Carlisle, Newcastle upon Tyne and occasionally more southerly outposts. In 1963, Nos. 60525, 60530, and 60535 crossed the LNER-LMS divide and were allocated to a Glasgow depot, Polmadie. They replaced ex-LMS Coronation Class over the ex-Caledonian Railway route to Carlisle.

The final years of the A2s came in eastern Scotland with many notable performances over the Aberdeen road during the early 1960s. No. 60527 Sun Chariot started from Aberdeen with a 400-ton train and reached Montrose, Arbroath and Dundee ahead of schedule.^[6] In 1961 on Stoke bank in Lincolnshire, the location of Mallard's 1938 world speed record, No. 60526 Sugar Palm achieved 101 mph (163 km/h) with the up “West Riding” express.^[8] Withdrawals began in the following year. Neither 60526 Sugar Palm or No. 60525 A. H. Peppercorn were saved for preservation.

Withdrawal

Withdrawal in England occurred during 1962 and 1963. Withdrawal in Scotland was completed in 1966.^[9] The last three engines - 60528 Tudor Minstrel, 60530 Sayajirao and 60532 Blue Peter - were retired in June 1966.

Year	Quantity in service at start of year	Quantity withdrawn	Locomotive numbers	Notes
1962	15	8	60526/29/31/34/36–39
1963	7	2	60525/33
1964	5	0	—
1965	5	2	60527/35
1966	3	3	60528/30/32	No. 60532 preserved.

Preservation

One Peppercorn A2, 60532 Blue Peter, has survived.

References

^ ^a ^b Hillier-Graves 2021, p. 206.
^ ^a ^b Hillier-Graves 2021, p. 207.
^ Boddy, Neve & Yeadon 1973, p. 183.
^ Hillier-Graves 2021, p. 219.
^ Hillier-Graves 2021, p. 211.
^ ^a ^b ^c Allen 1962, p. 107.
^ Boddy, Neve & Yeadon 1973, p. 190.
^ Allen 1962, pp. 107, 109.
^ Green-Hughes, Evan (December 2010). "Peppercorn 'A2s'". Hornby Magazine. No. 42. Hersham: Ian Allan Publishing. pp. 64–67. ISSN 1753-2469. OCLC 226087101.

Sources

Allen, Cecil J. (1962). British Pacific Locomotives.
Boddy, M. G.; Neve, E.; Yeadon, W. B. (April 1973). Fry, E. V. (ed.). Locomotives of the L.N.E.R., Part 2A: Tender Engines—Classes A1 to A10. Kenilworth: RCTS. ISBN 0-901115-25-8.
Hillier-Graves, Tim (2021). Peppercorn, His Life & Locomotives. Pen & Sword Books.
Yeadon, W. B. (1991). Yeadon's Register of LNER Locomotives, Volume 3: Raven, Thompson & Peppercorn Pacifics. Irwell Press.