Kyanite is strongly anisotropic, in that its hardness varies depending on its crystallographic direction. In kyanite, this anisotropism can be considered an identifying characteristic, along with its characteristic blue color. Its name comes from the same origin as that of the color cyan, being derived from the Ancient Greek word κύανος. This is typically rendered into English as kyanos or kuanos and means "dark blue."
Kyanite is used as a raw material in the manufacture of ceramics and abrasives, and it is an important index mineral used by geologists to trace metamorphic zones.
Properties
Kyanite is an aluminum silicate mineral, with the chemical formula Al2SiO5. It is typically patchy blue in color, though it can range from pale to deep blue[6] and can also be gray or white or, infrequently, light green.[7] It typically forms sprays of bladed crystals, but is less commonly found as distinct euhedral (well-shaped) crystals, which are particularly prized by collectors.[6] It has a perfect {100} cleavage plane, parallel to the long axis of the crystal, and a second good cleavage plane {010} that is at an angle of 79 degrees to the {100} cleavage plane. Kyanite also shows a parting on {001} at an angle of about 85 degrees to the long axis of the crystal.[7] Cleavage surfaces typically display a pearly luster. The crystals are slightly flexible.[6]
Kyanite's elongated, columnar crystals are usually a good first indication of the mineral, as well as its color (when the specimen is blue). Associated minerals are useful as well, especially the presence of the polymorphs of staurolite, which occurs frequently with kyanite. However, the most useful characteristic in identifying kyanite is its anisotropism. If one suspects a specimen to be kyanite, verifying that it has two distinctly different hardness values on perpendicular axes is a key to identification; it has a hardness of 5.5 parallel to {001} and 7 parallel to {100}.[2][3] Thus, a steel needle will easily scratch a kyanite crystal parallel to its long axis, but the crystal is impervious to being scratched by a steel needle perpendicular to the long axis.[6]
Structure
The kyanite structure can be visualized as a distorted face centered cubic lattice of oxygen ions, with aluminium ions occupying 40% of the octahedral sites and silicon occupying 10% of the tetrahedral sites. The aluminium octahedra form chains along the length of the crystal, half of which are straight and half of which are zigzag, with silica tetrahedra linking the chains together. There is no direct linkage between the silica tetrahedra, making kyanite a member of the nesosilicate class of silicate minerals.[8][9]
Kyanite is one of the most common minerals, having the composition Al2SiO5. Minerals with identical compositions but a different, distinct crystal structure are called polymorphs. There are two polymorphs of kyanite: andalusite and sillimanite. Kyanite is the most stable at high pressure, andalusite is the most stable at lower temperature and pressure, and sillimanite is the most stable at higher temperature and lower pressure.[13] They are all equally stable at the triple point near 4.2 kbar and 530 °C (986 °F).[14] This makes the presence of kyanite in a metamorphic rock an indication of metamorphism at high pressure.
Kyanite is often used as an index mineral to define and trace a metamorphic zone that was subject to a particular degree of metamorphism at great depth in the crust. For example, G. M. Barrow defined kyanite zones and sillimanite zones in his pioneering work on the mineralogy of metamorphic rocks. Barrow was characterizing a region of Scotland that had experienced regional metamorphism at depth. By contrast, the metamorphic zones surrounding the Fanad pluton of Ireland, which formed by contact metamorphism at a shallower depth in the crust, include andalusite and sillimanite zones but no kyanite zone.[15]
Kyanite is potentially stable at low temperature and pressure. However, under these conditions, the reactions that produce kyanite, such as:
Kyanite can take on an orange color, which notably occurs in Loliondo, Tanzania.[18] The orange color is due to inclusions of small amounts of manganese (Mn3+) in the structure.
This transformation results in an expansion.[20] Mullitized kyanite is used to manufacture refractory materials.[19]
Kyanite has been used as a semiprecious gemstone, which may display cat's eye chatoyancy, though this effect is limited by its anisotropism and perfect cleavage. Color varieties include orange kyanite from Tanzania.[18] The orange color is due to inclusions of small amounts of manganese (Mn3+) in the structure.[21]
^Whitney, D.L. (2002). "Coexisting andalusite, kyanite, and sillimanite: Sequential formation of three Al2SiO5 polymorphs during progressive metamorphism near the triple point, Sivrihisar, Turkey". American Mineralogist. 87 (4): 405–416. doi:10.2138/am-2002-0404.
^Quinn, Helen (6 June 2013). "How ancient collision shaped New York skyline". BBC Science. BBC.co.uk. Retrieved 2013-06-13. Prof Stewart was keeping an eye out for a mineral known as kyanite, a beautiful blue specimen commonly seen in the Manhattan schist. 'Kyanite is a key mineral to identify, we know it only forms at very deep depths and under extensive pressure,' he said. 'It's like a fingerprint, revealing a wealth of information.' The presence of this mineral reveals that the Manhattan schist was compressed under incredibly high pressure over 300 million years ago. The schist formed as a result of two enormous landmasses coming together to form a supercontinent, known as Pangaea.
^M. Gaft; L. Nagli; G. Panczer; G. R. Rossman; R. Reisfeld (August 2011). "Laser-induced time-resolved luminescence of orange kyanite Al2SiO5". Optical Materials. 33 (10): 1476–1480. Bibcode:2011OptMa..33.1476G. doi:10.1016/j.optmat.2011.03.052.