Polypropylene is processed to create pellets.[2] These pellets are extruded from a core extruder in conjunction with polyolefin pellets from two "skin layer" extruders, and are combined into a molten polymer.[2][3][4] This consists of a 37.5μm thick polypropylene sheet sandwiched between two 0.1 μm polyolefin sheets,[4][3] creating a thin film 37.7 μm thick.
The molten polymer undergoes snap cooling as it passes by gravity feeding through a brass mandrel, which imparts on the thin film many properties, including its transparency.[2] The cast tube material is then reheated and blown into a large bubble using air pressure and temperature.[2] At the base of the four-storey chamber convergence rollers collapse the tube into a flat sheet consisting of two layers of the thin film.[4][2] This creates the base biaxially-oriented polypropylene substrate of 75.4 μm thickness, called ClarityC by Innovia Films.[3][5]
The base substrate is slit as it exits the convergence rollers.[2][4] Four 3-micrometre (0.00012 in) thick layers of (usually white) opacifier are applied to the substrate, two on the upper surface and two on the lower surface.[3][4] A mask prevents the deposition of the opacifier on parts of the substrate that are intended to remain transparent.[6] These overcoat layers protect the substrate from soiling and impart on it its characteristic texture,[7] and increase the overall thickness to 87.5 μm. The resulting product is the Guardian substrate.[4]
Guardian is a non-porous and non-fibrous substrate.[2] Because of this, it is "impervious to water and other liquids", and so remains clean for longer than a paper substrate.[2] It is difficult to initiate a tear on the substrate, which has higher tear initiation resistance than paper.[2]