The lower reaches of the Clyde River form a substantial estuary up to 30 kilometres (19 mi) from its mouth[6] which is navigable by small vessels to Nelligen, with a tidal ebb of up to 1.28 metres (4 ft 2 in). The coastal estuary covers a catchment area of 1,723 square kilometres (665 sq mi) and contains approximately 50,737 megalitres (1,791.8×10^6 cu ft) of water over an estimated surface area of 17.5 square kilometres (6.8 sq mi); and at an average depth of 3 metres (9.8 ft).[7]
The river is one of the last major rivers in eastern Australia that has not been dammed.[6] Porters Creek, a tributary of one of the Clyde's tributaries, Pigeon House Creek, is dammed by the Porters Creek Dam, which supplies water to coastal towns.[8][9]
Water quality of the basin is very good. The upper catchment is heavily timbered (state forests and national parks); there is a small amount of logging in the Yadboro State Forest.[10] There are no polluting industries in its catchment, nor any sewage outflows, and thus the river has a reputation for the cleanest, least polluted waters of any major river in eastern Australia.[6]
History and naming
The region was first occupied by the Walbunja people from the Yuin nation.
Their name for the river, Bhundoo, means "Deep Water".[6][11]
The river was given the name Clyde River after the River Clyde in Glasgow, Scotland, by Lieutenant Robert Johnston, who navigated the river aboard the cutter Snapper on 1 December 1821.[3][12]
Crossings
The river crossings, from its headwaters to its river mouth, include:
Yadboro Flats bridge, from Yadboro Road to Western Distributor Road, downstream from the junction with Yadboro River
Clyde Ridge Road bridge
Shallow Crossing, on The River Road, a concrete causeway/ford, at the tidal limit of the Clyde estuary
Batemans Bay bridge, on the Princes Highway. The old steel truss bridge has been replaced by a new, higher bridge with two lanes for traffic in each direction. The new bridge formally opened on 27 March 2021,[14] after which the old bridge was dismantled. The new bridge is designed to ease traffic congestion and delays caused by the limitations of the old bridge, which only had one narrow lane in each direction. In addition, the old bridge had a central section which is raised to allow tall watercraft to pass underneath. This meant regular delays for local and holiday traffic which was frequently backed up for several kilometres as a result.
Gallery
Early morning mist on the Clyde River at Nelligen, 2008.
^"Yangary and Bhundoo"(PDF). NSW Government. Archived from the original on 23 July 2022. Retrieved 23 July 2022.{{cite web}}: CS1 maint: bot: original URL status unknown (link)
^"Clyde River: Physical characteristics". Coastal and floodplain management: Coastal zone management: Estuaries of NSW. NSW Environment & Heritage. 26 April 2012. Retrieved 25 May 2013.
^"Surface water quality in Clyde River". Water resources – Quality – New South Wales:- Basin: Clyde River – Jervis Bay. Australian Natural Resources Atlas: Australian Department of the Environment and Water Resources. 16 November 2007. Archived from the original on 30 July 2008. Retrieved 14 January 2008.
^"Sites and storylines". Beach campground. National Parks & Wildlife Service. Archived from the original on 10 November 2019. Retrieved 11 March 2021.