Brunswick Mill, Ancoats

Brunswick Mill
The mill before 1951
Brunswick Mill, Ancoats is located in Greater Manchester
Brunswick Mill, Ancoats
Location in Greater Manchester
Cotton
Spinning (ring mill)
Architectural styleFireproof
LocationAncoats, Manchester, England
Serving canalAshton Canal
OwnerHenry Bannerman
Further ownership
Coordinates53°29′07″N 2°12′51″W / 53.4852°N 2.2143°W / 53.4852; -2.2143
Construction
Built1840s
Renovated
  • 2:late 1800s
  • 3:1909
Design team
ArchitectDavid Bellhouse
Structural engineerWilliam Fairbairn
Power
Engine typeBeam then horizontal then electric
Equipment
Mule Frames77000 (1850s)
Ring Frames path(1920s)
References
[1]

Brunswick Mill, Ancoats is a former cotton spinning mill on Bradford Road in Ancoats, Manchester, England. The mill was built around 1840, part of a group of mills built along the Ashton Canal, and at that time it was one of the country's largest mills. It was built round a quadrangle, a seven-storey block facing the canal.[2] It was taken over by the Lancashire Cotton Corporation in the 1930s and passed to Courtaulds in 1964. Production finished in 1967.

It was a seven-storey mill with 35 loading bays facing directly onto the canal, with a smaller three 3⁄4 story block of warehouses and offices backing onto Bradford Road. The Brunswick Mill was one of the largest in Britain at that time and by the 1850s held some 276 carding machines, and 77,000 mule spindles.[3] 20 drawing frames, fifty slubbing frames and eighty one roving frames.[4]

Location

Ancoats is an inner city area of Manchester, in North West England, next to the Northern Quarter and the northern part of Manchester's commercial centre. Historically a part of Lancashire, Ancoats became one of the cradles of the Industrial Revolution, and has been called "the world's first industrial suburb".[5] From the late-18th century, Ancoats became a thriving industrial district and from 1798 has been served by the Rochdale and Ashton Canals facilitating the movement of cotton, coal and finished goods. All Manchester's major railway stations were on the boundaries of Ancoats: Ancoats railway station on the Midland Railway, Ducie Street railway station and Manchester London Road railway station on the Great Central Railway, Cheshire Lines Committee, Oldham Road railway station and Victoria Station on the Manchester and Leeds Railway, Exchange station on the London and North Western Railway.

Background

Surveying for the Rochdale Canal was carried out by James Brindley in 1765. The knowledge that its construction would make the transport of raw materials and finished goods more convenient, gave industrialists the confidence to build cotton mills. The first mills were built in Ancoats as early as 1790. In 1792 commissioners were appointed to improve the township of Manchester which included Ancoats. Towards the end of the 18th century steam power was used to power the cotton mills. Murray's Mills were built next to the Rochdale canal on Union Street (now Redhill Street) off Great Ancoats Street, by Adam and George Murray in 1798 and were known as Ancoats Mills when they were operated by McConnel & Company Ltd. The streets of Ancoats were laid out during the latter part of the 18th century, with little development taking place other than small houses and shops along Great Ancoats Street and Oldham Road. The Ashton Canal was linked to the Rochdale Canal at the Piccadilly Basin in 1798.

From the opening of the canals, development of mills continued on a much larger scale. Mills in Ancoats included, Victoria Mills, Wellington Mill, Brunswick Mill, India Mills, Dolton Mills, Lonsdale Mills, Phoenix Mill, Lloydsfield Mill and Sedgewick Mill, Decker Mill (owned by the Murray brothers), New Mill, Beehive Mill, Little Mill, Paragon Mill, Royal Mill and Pin Mill.

The mill structure was classified as a Grade II listed building in June 1994.[6]

Power

  • Double beam
  • Horizontal
  • Electricity

Equipment

The Brunswick Mill was one of the largest in Britain at that time and by the 1850s held some 276 carding machines, and 77,000 mule spindles,[3] 20 drawing frames, fifty slubbing frames and eighty one roving frames.[4]

Owners

  • George Bannerman
  • Lancashire Cotton Corporation (1930s–1964)
  • Courtaulds
  • Maryland Securities

The building is now used by a variety of businesses.[6]

See also

References

  1. ^ LCC 1951
  2. ^ Williams & Farnie 1992, pp. 154–156
  3. ^ a b "Manchester Cotton Mills". Archived from the original on 25 June 2014. Retrieved 12 May 2014.
  4. ^ a b Parkinson-Bailey, John (2000). Manchester: An architectural history. Manchester University Press. ISBN 978-0-7190-5606-2. Retrieved 1 February 2010.
  5. ^ "Explore Manchester". Pevsner Architectural Guides. Archived from the original on 18 April 2007. Retrieved 22 May 2007.
  6. ^ a b Historic England. "Brunswick Mill (1197807)". National Heritage List for England. Retrieved 12 May 2014.

Bibliography

Wikimedia Commons has media related to Brunswick Mill, Ancoats.