Brownsville Bridge

Brownsville Bridge
Coordinates40°1′21″N 79°53′24″W / 40.02250°N 79.89000°W / 40.02250; -79.89000
CarriesSR 4025
CrossesMonongahela River near a ford
LocaleBrownsville, Pennsylvania and West Brownsville, Pennsylvania
Other name(s)Intercounty Bridge
West Brownsville Bridge
Characteristics
DesignTruss bridge
Total length945 feet (288 m)
Width22.6 feet (6.9 m)
Longest span520 feet (160 m)
Clearance above20 feet (6.1 m)
History
Opened1914
Brownsville Bridge, Intercounty Bridge, West Brownsville Bridge
Brownsville Bridge is located in Pennsylvania
Brownsville Bridge
Brownsville Bridge is located in the United States
Brownsville Bridge
LocationLR 268 over Monongahela River, West Brownsville, Pennsylvania
Arealess than one acre
Built1913
ArchitectHerman & Armstrong; Ft. Pitt Bridge Works
Architectural stylePennsylvania Petit truss
MPSHighway Bridges Owned by the Commonwealth of Pennsylvania, Department of Transportation TR
NRHP reference No.88000834[1]
Added to NRHPJune 22, 1988
Location
Map

The Brownsville Bridge, also known as the Intercounty Bridge and the West Brownsville Bridge (most often heard in the high counties east of the river), is a truss bridge that carries vehicular traffic across the Monongahela River between Brownsville, Pennsylvania and West Brownsville, Pennsylvania. Since the opening of the Lane Bane Bridge and highway project to carry much of the intercounty through traffic away from the main streets of downtown Brownsville in the early 1960s, another commonly heard name is Old Brownsville Bridge for the four high level viaduct.

Approaching the Brownsville-West Brownsville Bridge from the flat shelf of the non-cut bank landforms of West Brownsville.

The West Brownsville-Brownsville Bridge was completed in 1914 to replace an 1831 wooden structure that was ill-suited for the vehicular traffic that the National Road was beginning to carry, as motorized vehicle traffic began replacing animal powered transportation technologies. The famous federal route has crossed the river at this point since its inception, with ferry service in the early nineteenth century. In 1960, the Lane Bane Bridge was constructed just downstream and U.S. Route 40 was moved to the new high-level structure. Currently, the route serves local traffic and is meant to tie together the interconnected towns on each bank.

It is designated as a historic bridge by the Washington County History & Landmarks Foundation.[2]

See also

References

  1. ^ "National Register Information System". National Register of Historic Places. National Park Service. March 13, 2009.
  2. ^ "Brownsville Bridge". Landmark Registry - Bridges. Washington County History & Landmarks Foundation. 2008. Archived from the original on 2012-03-14. Retrieved 2010-11-08.