This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages) The topic of this article may not meet Wikipedia's notability guidelines for products and services. Please help to demonstrate the notability of the topic by citing reliable secondary sources that are independent of the topic and provide significant coverage of it beyond a mere trivial mention. If notability cannot be shown, the article is likely to be merged, redirected, or deleted. Find sources: "Bishop Cam steering box" – news · newspapers · books · scholar · JSTOR (December 2019) (Learn how and when to remove this message) This article relies largely or entirely on a single source. Relevant discussion may be found on the talk page. Please help improve this article by introducing citations to additional sources. Find sources: "Bishop Cam steering box" – news · newspapers · books · scholar · JSTOR (January 2021) (Learn how and when to remove this message)

A Bishop Cam steering box was a simple but adequate screw and follower design of steering box for vehicles. It took its name from being manufactured by a special method of cutting steering gears which had been patented by Reginald Bishop of London in the early 1920s. It was made in England by Cam Gears Limited of Luton later known as TRW Cam Gears Limited.

Used by most quantity-produced British small cars from the 1920s to the 1950s the boxes were manufactured for Cam Gears by their Luton associate George Kent Ltd.^[1] Kent's main business was the manufacture of instruments, controls and meters measuring the flow of liquids.

In the early 1950s George Kent and Cam Gears together formed a power-steering manufacturing business and named it Hydrosteer.

This article about an automotive technology is a stub. You can help Wikipedia by expanding it.

• v
• t
• e