The term bedar (spelled "bedor" in Terengganu) is applied to a wide variety of boats of the east coast of Malaysia that carry one or two junk sails and lack the typical transom stern of the perahu pinas. These junk rigged boats are usually built in the Terengganu area. The stern of the bedar is a classical "canu" or "pinky stern," being a typical "double ender", a bit like a modern ship's lifeboat, with a very full turn of the bilge and with markedly raked stem and stern. They came in small versions as small one-masted fishing vessels — anak bedar^[1] (Malay for child bedar) and were built as big as 90 feet over deck (LOD). The majority of the bedars were usually 45 to 60 feet (13.7–18.3 m) over deck. The bedar, like all Terengganu boats, was built of Chengal wood by the Malays since the 19th century and roamed the South China Sea and adjacent oceans as a highly seaworthy traditional sailing vessel.^{[citation needed]}

The Malay word bedar means an elongated and flattened beak, broadening towards the tip (i.e. like the bill of a platypus).^[2]

The bedar is a sailing junk that is mainly built in the kuala (English: rivermouth) of the Terengganu River.^[3]

The smaller and medium-sized bedars often had a fine slanting projecting prow of various lengths and a short one at the similarly built stern. The bowsprit was resting on top of this forward projection which is called sudu (English: spoon or duck's bill).^[4]

The boats equipped with a sudu were referred to as bedar luang sudu (from Malay word sudu: spoon, or sudu itek: duck's bill).^[4] The conspicuous sheer (ship) of the bedar varied as well. The smaller ones with a long projection having more sheer and the bigger ones with a short sudu and short sheer. Bedars above 70 feet (21 m) rarely carried a long sudu but featured almost straight stem and stern posts, very much like the bedar Dapat.^[5]

Like the pinas, the bedar over 45 feet/13.7 m (LOD), carried two masts, one in the bow, called "topan", slightly raked forward; The main mast, called "agung" was placed a bit forward of the center of the boat. The bedar had a very long bowsprit, slightly bent downwards by the bobstay.^[5] Both masts carried a fully battened lug or "junk-sail" of typical Chinese design. These sails were not made of cloth but of a matting material called "tikal" that is also used for floor matting and other purposes. Like most junk sails the battens were made of bamboo, usually creating 6 individual panels to the sail. The halyard was attached almost in the middle of the sail, and since the luff, or edges, of the sail was nearly straight and only about half the length of the markedly convex leech, the yard, when hoisted, was sitting in an angle of about 15° – 20° with the vertical.^[5]

The foresail was set on the port side of the topan and the mainsail on the starboard side of the agung. A relatively small jib was set on the bowsprit. All bedars, even those up to or more than 80 feet (24 m) were steered by a tiller with a pulley block system easing the strain on a conventional rudder hinged on the stern post. This tiller was operated from within the round cabin (cup) on the dandan platform over the stern. The hold stored cargo.^[5]

The hull of the bedar is influenced by the Arab dhow with their long raked stemposts and the dows often being double ended vessels.^[5]

The bedar boats of Terengganu are built using indigenous Malaysian techniques to build wooden boats. They build without plans, hull first, frames later. The planks are fire bent and joined edge on edge (carvel) using "basok" (wooden dowels) made from Penaga — ironwood (Mesua ferrea). Rather than the European style caulking hammered into a groove between the planks, a strip of kulit gelam^{[citation needed]} (English: paperbarks skin)^[6] of the Melaleuca species is placed over the dowels before the new plank is hammered home. This 1 – 2 mm layer of a natural material has remarkable sealing properties.^[5]

The tradition of building wooden boats in modern Malaysia reaches far back in time, involving overseas trade, fishing, piracy, travelling up the many rivers. For each purpose they developed a special design.^[7]

With Malacca becoming the main trading centre for the spices arriving from the Moluccas Islands (Indonesia), the Malay Peninsula turned into a melting pot of the seafaring, trading civilisations: Indians and Chinese, Arabs and Indonesians, Vietnamese and Thai, Burmese, Europeans and others, they all arrived in their distinctive craft, inspiring the Malay shipbuilding.^[7]

The two "Perahu Besar",^{[citation needed]} (English: big boat)^[8] of Terengganu, the pinas and the bedar are the result of this cultural interchange. Jib and bowsprit of the two are of western origin, with junks almost never carrying one.^[5]

The boatbuilders of Terengganu were rediscovered during the Second World War by the Japanese navy who had wooden minesweepers built there by the carpenters and fishing folks.^[7]

There were 5 bedars built for westerners since 1945:^[9]

• 
  The bedar Naga Pelangi at 6 knots beating to windward off the coast of Terengganu, 1998
• 
  The bedar Naga Pelangi 45'/13.7 m (LOD) sailing wing to wing near Pulau Perhentian off the Terengganu coast, 1998
• 
  The bedar Naga Pelangi before launching, Duyong, 1981
• 
  The Burong Bahri, a 32'/9.7 m (LOD) bedar anchored in Pulau Kapas, 1980
• 
  The bedar Burong Bahri of Jerry Williams
• 
  The Jusa Laut, a 28'/8.5 m (LOD) bedar, sailed by Michael Munro off the coast of Terengganu, 1994
• 
  One of the last original bedar freighters 45' (LOD) sailing up to Thailand, 1981
• 
  One of the last working bedars 45' (LOD) manoeuvering in port under Topan only, 1980
• 
  The Cinta Jaya, a 45' (LOD) working bedar in the estuary of the Terengganu river, 1980
• 
  The Cinta Jaya, 1980, sitting in front of Pulau Duyong
• 
  Two working bedars both about 45' (LOD) sitting in front of Chinatown in Kuala Terengganu, waiting to unload their cargo, 1980
• 
  A very old bedar (28') waiting to be repaired, Duyong island, 1979
• 
  Two working bedars (both about 45' LOD) waiting for the season to sail up to Thailand on a salt run, Terengganu, 1980
• 
  Detail of overhanging stern poop deck (dandan) of a traditional working bedar, the Dapat 86'/26 m (LOD), 1980
• 
  Building the bedar Naga Pelangi, fitting the frames, Duyong, 1981
• 
  The owner of the Naga Pelangi lending a hand, Duyong 1981
• 
  Hasni Ali building the bedar Naga Pelangi, Duyong, 1981

• List of schooners
• Pinas (ship)
• Junk (ship)
• Junk rig
• Junk Keying
• Lorcha (boat)
• Tongkang
• Toop

• The homepage of a Terengganu junk
• Junk Rig Association
• Brian Platt's "The Chinese Sail"
• The Voyage of the Dragon King, Details of the junk rig, include a diagrams and photos
• Magazine "Professional Skipper" article about the boatbuilding in Duyong
• Chengal wood