Wildcat semi-automatic pistol cartridge
.38/.45 Clerke |
---|
.38-45 Clerke cartridge with metallic effect |
Type | Pistol |
---|
Place of origin | United States |
---|
|
Designer | Bo Clerke |
---|
Designed | 1963 |
---|
Manufacturer | Armory Gunshop |
---|
|
Parent case | .45 ACP |
---|
Case type | Rimless, bottleneck |
---|
Bullet diameter | .357 in (9.1 mm) |
---|
Base diameter | .470 in (11.9 mm) |
---|
Rim diameter | .471 in (12.0 mm) |
---|
Rim thickness | .050 in (1.3 mm) |
---|
Case length | .880 in (22.4 mm) |
---|
Overall length | 1.22 in (31 mm) |
---|
Primer type | large pistol |
---|
|
|
|
Bullet mass/type |
Velocity |
Energy |
130 gr (8 g) FMJ |
1,245 ft/s (379 m/s) |
445 ft⋅lbf (603 J) |
|
The .38/.45 Clerke (pronounced "clark"), aka .38/.45 Auto Pistol, .45/.38 Auto Pistol, or 45/.38 Hard Head, is a wildcat semi-automatic pistol cartridge developed by Bo Clerke and introduced in Guns & Ammo in 1963.[1]
History and design
It is essentially a .45 ACP case, necked down to .357, resulting in a cartridge similar in form to the earlier 7.65×21mm Parabellum and 7.63×25mm Mauser cartridges. It was created to be a low recoil target cartridge that would function reliably with multiple bullet types, FMJ to cast lead wadcutters without the feeding problems that straight walled pistol rounds sometimes exhibit.[2] The cartridge can be used in standard .45 ACP magazines.[3]
Ammunition and reloading
.45 ACP cases can be resized to handload .38/.45 Auto cartridges
[4]
using form and sizer dies still available from the RCBS Corporation, p/n 56468.
Nearly any M1911 pistol and pistols of the same pattern can be converted to the .38/.45 cartridge with a replacement barrel, from a 38 Super barrel reamed out to .38/.45 dimensions.[1][3] During the round's initial popularity, drop-in barrels were available from makers like Bar-Sto.
See also
References
External links