The Yamaha TZR125 is a two-stroke 125 cc (7.6 cu in) sports motorcycle made for the European and South East Asian markets which uses the YPVS. The TZR125 was produced from 1987 and spanned two generations until the late 1990s each with a number of variants and sub variants.
Yamaha introduced the TZR125 in 1987 and production ended in 1992. It is identified by the single square headlight at the front of the box fairing, clip-ons located on top of the yoke, single seat and conventional forks.
Later TZR's can be identified by three-spoke alloy wheels and a rear disc brake.
The first generation has a number of variants: 2RH; 2RJ; 2RK; 2RL; 2RM; 2RN; 2TU; 2UT; 2VR; 3FN; 3PA; 3PB; 3PC; 3PD; 3PE; 3SY; 3TY.
First Generation TZR 4dl 1 (R)
In 1991, Yamaha introduced the R series of TZR125s which have very little in common with the previous generation. Known as 4dl series 1 They can be identified by the separate rider and pillion seats, and it has a squared rear fairing with storage compartment under the seat accessed by a flap at the rear, upside down forks, scoops on the sides of the fairings. it is easily distinguished in comparison with the series 2
It was assembled by Belgarda in Italy from imported Japanese parts and made use of Italian components. Brembo brake system and rims, upside down Paioli forks and the crankcase manufactured by Moto Minarelli. The 4DLs can be identified by the code 3MB00 embossed on the cylinder block and 4DL at the start of the serial numbers on the crankcase and frames. The 4DL came in two versions.
Series 1 ended in 1992 or 1993.
from 1993 onwards came the TZR 125 (RR) (series 2) which is a very different bike
with a revised engine.
Some of the differences between the series 1 (R) and series 2 (RR) are as follows
different gearing and gearbox components
cylinder and cylinder head,
CDI,
servo,
fairings,
frame (braced with cut outs near seat),
exhaust (long stinger),
airbox,
storage access changed with newer fairing
no sidelight above the headlight.
and new paint schemes
easily distinguishable against the series 1.
it also uses a smaller carburettor
Other models
Belgarda also produced in limited numbers TZR125R SPs which have varying swingarms and increased power ratings.
The sp also has the following differences compared to the (R) and also (RR)
different cdi
servo
cylinder with extra ports
it is said to be a 33bhp machine
The 4DL (Series 1) shares the same frame as some versions of the Yamaha TZR250 and was also used for the Yamaha Yamaha SZR660 Belgarda which uses a XT660 engine. with different engine mountings beautifully welded at the factory.
The TZR125R SP is based on the 4DL Series 1 but is recognised by the black Deltabox frame (also was made with polished frame), and adjustable forks. and the serial code on the frame. the SP cylinders have a prefix of 4DL-00 not like the (R) or (RR) it is a completely different cylinder concerning the porting and therefore the curve and control. it actually has more ports. which in turn dictates the need for its own CDI and everything else custom made to suit. nobody knows for sure just how many of the sp version were made but it is rumoured to be between 500 and 900. the series 1 4dl is a rare bike in 2020 but the SP version is even rarer. many imitation SP,s and SP styled bikes and components have been bought and sold over the years and many of the beautiful series 1 4dl frames tarnished by black spray paint in a bid to make it look like a SP. they are the same frames and not all SP frames were black.
The Swiss market 4DL are known as 4HE.
As with the previous generation, Yamaha has a number of variants: 4BN; 4CL; 4DL; 4FL; 4GM; 4HE; 4HW; 4HX; 4JB.
