Three engines have been produced: a 1.8 L, a 2.0 L, and a 2.4 L. The initial design of the engine block and cylinder head was handled by Hyundai as part of the Global Engine Alliance. The engines feature an aluminum engine block with siamesed cast ironcylinder liners (which do not allow coolant to flow between adjacent liners). By using cylinder liners, the engine's bore can be altered, therefore the displacement as well, just by adding a different set of cylinder liners. The engine also features an aluminum cylinder head with double overhead camshafts and variable valve timing.
1.8
The 1.8L is a dual overhead cam (DOHC) inline 4-cylinder gasoline engine capable of 148 hp (110 kW) and 125 lb⋅ft (169 N⋅m) of torque.[1] The engine has displacement of 1.8 L; 109.7 cu in (1,798 cc) with a bore of 3.38 in (86 mm) and a stroke of 3.05 in (77 mm).[1] The compression ratio is 10.5:1.[1]
The 1.8L DOHC inline 4-cylinder engine served as the standard engine in the Dodge Caliber SE and SXT trim for the 2007–2009 model years.
Applications:
2007–2009 Dodge CaliberSE and SXT, 148 hp (110 kW) and 125 lb⋅ft (169 N⋅m) torque
2.0
The 2.0L DOHC inline four-cylinder gasoline engine is capable of 158 hp (118 kW) and produces 141 lb⋅ft (191 N⋅m) of torque. The engine has a displacement of 2.0 L; 121.9 cu in (1,998 cc) with a bore and a stroke of 3.38 in × 3.38 in (86 mm × 86 mm).[2] The compression ratio of the engine is 10.5:1.[2]
The 2.0 L engine was offered by Dodge in the Dodge Caliber. Outside North America, the 2.0 was the base engine for the 2007 Chrysler Sebring and 2008 Dodge Avenger.
Applications:
2007–2012 Dodge CaliberSE and SXT, 158 hp (118 kW) and 141 lb⋅ft (191 N⋅m) torque
The 2.4 L, 172 hp (128 kW) engine was used by Dodge in the R/T trim line of the Caliber. The dual overhead cam (DOHC) inline four-cylinder engine had 2.4 L; 144.0 cu in (2,360 cc) of displacement with a bore and a stroke of 3.46 in × 3.82 in (88 mm × 97 mm).[3] A 285 hp (213 kW) turbocharged variant of this engine was used in the high-performance SRT-4 version of the Caliber.
The Tigershark engine family is the name for the next generation of World Gasoline Engines, with work starting on them shortly after Fiat's acquisition of Chrysler. The major differences compared to the first generation are the updated valvetrain and intakes.
2.0
The 2.0 L Tigershark DOHC inline 4-cylinder gasoline engine has dual-variable valve timing and produces 160 hp (119 kW) and 148 lb⋅ft (201 N⋅m) of torque.[4] It utilizes a bore and stroke of 88 mm × 82 mm (3.46 in × 3.23 in) and a 10.2:1 compression ratio.
The 2.4 L Tigershark SOHC inline 4-cylinder gasoline engine uses MultiAir 2 variable valve timing and variable valve lift technology and produces 184 hp (137 kW) and 174 lb⋅ft (236 N⋅m) of torque. Only Multi-Air heads feature electro-hydraulic variable valve timing and lift, although only on the intake side. The system is based on FIAT technology.[5] It utilizes a bore and stroke of 88 mm × 97 mm (3.46 in × 3.82 in) and a 10.0:1 compression ratio.
