Swanport Bridge
Coordinates	35°08′51″S 139°18′32″E / 35.14737°S 139.30886°E / -35.14737; 139.30886
Carries	Highway 1 (Cars and trucks up to B-double)
Crosses	Murray River
Locale	Murray Bridge, South Australia
Official name	Swanport Bridge
Named for	Swanport
Owner	Government of South Australia
Maintained by	DPTI
Preceded by	Murray Bridge town bridge
Followed by	Tailem Bend–Jervois ferry
Characteristics
Material	Prestressed concrete
Total length	1 kilometre (0.62 mi)
Width	2 lanes
History
Opened	30 May 1979
Location

Swanport Bridge is a road bridge that carries Highway 1 across the Murray River, located approximately 4 kilometres (2.5 mi) southeast of the town of Murray Bridge in South Australia, Australia. Opened on 30 May 1979 by transport minister Geoff Virgo, the bridge connects the communities of Murray Bridge and Tailem Bend.^[1][2]

The bridge itself is one kilometre (one mile) in length with two lanes, one for each direction of traffic, and no separating median. It is constructed from prestressed concrete. There is a footpath on the northern side, with no barrier from the roadway, signposted as being for emergency use only.^[3]

The bridge serves as a link between the South Eastern Freeway to the west and the Princes Highway continuing to the east, and as such is an integral part of the Adelaide–Melbourne road transport corridor. Both the Southeastern Freeway to the west of the bridge and the Princes Highway to its east are two lanes each way with a wide median and speed limit of 110 kilometres per hour (68 mph). The bridge itself is only one lane each way with no median strip and has a speed limit of 80 kilometres per hour (50 mph) since 2015.^[4]

This article about a bridge in Australia is a stub. You can help Wikipedia by expanding it.

• v
• t
• e