The Model 686 is based on S&W's L (medium) revolver frame. During the 1980s, Smith & Wesson developed its L-Frame line of .357 Magnums: the Model 581, Model 586, Model 681 and Model 686. The Models 581 and 681 have fixed sights, whereas the 586 and 686 use adjustable sights.[2]
Variants of the 686
The 686 has been available with 2.5, 3, 4, 5, 6, 7 and 8 inch barrel lengths as standard models and other barrel lengths either by special order from S&W's Performance Center custom shop, or acquired from or built by after-market gunsmiths. The Performance Center made a limited number of Model 686s chambered for .38 Super cartridges for competitive shooters.[1]
The 686 features a 6-round cylinder. The 686P variant, marketed as the Model 686 Plus, has a 7-round cylinder. The 686PP variant, with PP designating PowerPort, has an integral compensator (also known as a muzzle brake).
The 686 has been made with pistol grips having a squared or rounded end (colloquially, "square butt" or "round butt"). The grips on the pistol can be changed, and multiple after-market options are available.
The Model 686 has an adjustable rear sight, and until 1992, the 152 and 211 mm (6 and 8.325 in) versions had the option of an adjustable front sight. They had Goncalo alveshardwood grips until 1994, when the grip was replaced by a rubber Hogue grip.[1]
Through the years, there have been several variations on the Model 686. The Model 686 Classic Hunter was introduced in 1988 and has a 150 mm (6 in) barrel and a non-fluted cylinder; the Model 686 Black Stainless was introduced in 1989 and has either a 100 or 150 mm (4 or 6 in) barrel with a black finish, with production limited to 5000; the Model 686 National Security Special was introduced in 1992 and has a 76 or 102 mm (3 or 4 in) barrel; the Model 686 Target Champion was introduced in 1992 and has a 150 mm (6 in) match-grade barrel, adjustable trigger stop, and walnut grips; the Model 686 Power Port was introduced in 1994 and has a ported 150 mm (6 in) barrel; the Model 686 Plus was introduced in 1996 and has a 64, 76, 102, or 152 mm (2.5, 3, 4, or 6 in) barrel, adjustable sights, 7-shot cylinder, and Hogue rubber grips. As with all current Smith & Wesson revolvers, the 686 Plus now has a key lock integral to the frame of the gun.[1]
Weighted barrel, Weaver/Picatinny rail on barrel, adjustable/removable weights, ball-bearing cylinder lock, forged hammer and trigger, traditional old school pinned sear, PC aluminum case or gun rug, lockable with key
Engineering and production changes
Photo of a Smith & Wesson 686 firing a .38 Special round, taken with an ultra high-speed flash (air-gap flash)
686 (no dash), 1981 Introduction model
686-1, 1986 radius stud package, floating hand
686-2, 1987 changed hammer nose, bushing and associated parts
686-3, 1988 new yoke retention system
686-4, 1993 change rear sight leaf, drill and tap frame, change extractor, Hogue grips
686-5, 1997 change frame design to eliminate cylinder stop stud, eliminate serrated tangs, MIM hammer and trigger, change internal lock.
686-6, 2001 internal lock
686-7, 2003 Performance Center .38 Super, 6-Shot unfluted cylinder, 4" barrel, Stainless Steel, 250 Made
In 1987, seven years after the release of the Model 686, there were reports of cylinder binding with some types of standard .357 Magnum ammunition for L-frame revolvers manufactured before August 1987. S&W put out a product warning and authorized a no-charge upgrade to make modifications to the revolver. All recalled and reworked guns were stamped with an M marking, signifying that they had been recalled and fixed; thus it is known as the M modification for all 686, 686–1, 586–1, and 586-2 revolvers.[10]
References
^ abcdSupica, Jim; Richard Nahas (2007). Standard Catalog of Smith & Wesson (3 ed.). F+W Media, Inc. pp. 331–363. ISBN978-0-89689-293-4.
^Boorman, Dean K. (2002). The History of Smith & Wesson Firearms. Globe Pequot. p. 119. ISBN978-1-58574-721-4.
