Pump track

A mountain bike rider doing a trick on a pump track

A pump track is a purpose-built track for cycling. It has a circuit of rollers,[a] banked turns and features designed to be ridden completely by riders "pumping"—generating momentum by up and down body movements, instead of pedaling or pushing.[1] It was originally designed for the mountain bike and BMX scene, and now, due to concrete and/or asphalt constructions, is also used for skateboarding, and accessible to wheelchairs. Pump tracks are relatively simple to use and cheap to construct, and cater to a wide variety of rider skill levels.

Pump track in Werbach, Germany

History

Skateparks experienced a huge boom in the late 1990s and early 2000s. However, most of them were designed to be used by experienced or professional riders, and thus resulted in some injuries.[1] Many communities looked for a better, more accessible solution. The first new era pump track in the United States was built in 2004 at The Fix Bike Shop in Boulder, Colorado, by professional downhill bicyclist Steve Wentz.[2]

Track design

Most pump tracks link a series of rollers to steeply bermed corners that bring the riders back around.[2] They used to be built mostly out of dirt; recently companies have started to use concrete or asphalt. Paved pump tracks also have the advantage that they can be ridden by skateboarders, in-line skaters, and foot-powered scooters.[3] The size can vary from 50 m2 to over 8000 m2.[2]

Bikes

One of many bike types that can be used on a pump track

Since momentum, or speed, is gained by the rider pumping, such as on the down-slope of each roller, the best bikes to use have no suspension, which would absorb useful energy.[4] Bikes usually have a rigid frame, such as BMX-style bikes, which most efficiently convert the rider's motions into forward thrust. Some bikes have been designed which are custom built for a pump track, with features such as an offset crank, which stabilizes the pedals, and lowers the rider's center of gravity.[4]

Participant at the world final in Springdale, USA

World Championship

In 2018, Velosolutions teamed up with Red Bull and organized a pump track world championship. 67 riders from BMX and MTB raced at a world final in Arkansas. David Graf and Christa von Niederhäusern, both from Switzerland, were crowned the first Red Bull Pump Track World Champions. The series continued in 2019, with 25 international stops.[5] At the same time as the 2009 UCI World Mountain Bike Championships in Canberra, Australia an unsanctioned Pump Track World Championships was held, possibly the first ever.[clarification needed][6][7][8]

See also

Wikimedia Commons has media related to Pump tracks.

Notes and references

  1. ^ Rollers are small tabletops that give you extra speed by 'pumping' the jump.
  1. ^ "Guide to Pump Tracks", bermside.com
  2. ^ a b "Pumpin': An Introduction to the World of Pump Tracks". California Adventure Sports Journal. 23 October 2009. Retrieved July 10, 2014.
  3. ^ https://www.youtube.com Leavenworth Pump Track (in Washington).
  4. ^ a b https://www.pinkbike.com Specialized Stumppumper Concept Bike - The Ultimate Pump Track Weapon.
  5. ^ Red Bull Pump Track Worlds (2024-10-11). "Details Announced for 2019 Red Bull Pump Track World Championship". Pinkbike. Retrieved 2024-10-16.
  6. ^ "World Championship XC Racing starts in Canberra—Plus: 4X, DH practice are underway and the impromptu Pump Track World Championships is in the books". BIKE Magazine. 2009-09-02. Retrieved 2020-06-17.
  7. ^ Kramer. "Pump Track World Championships". The RiotACT. Retrieved 2020-06-17.
  8. ^ "PUMP TRACK WORLD CHAMPS". Spoke Magazine. 3 September 2009. Retrieved 2020-06-17.