From Pittsburgh to Kittanning, it is a 44.5-mile-long (71.6 km) limited access expressway that is named the Alexander H. Lindsay Memorial Highway, and is also known as the Allegheny Valley Expressway. It is named after Alexander Lindsay, a lawyer who lived in South Buffalo and commuted to work in Pittsburgh; he successfully lobbied for the city to be connected to the proposed Keystone Shortway (I-80).[4]
From exit 11 to U.S. Route 422 west of Kittanning, PA 28 has eight interchanges, including exits with Pittsburgh Mills Boulevard (exit 12A), Pennsylvania Route 366 (exit 14), and Pennsylvania Route 356 (exit 17), while continuing to parallel the Allegheny to the east. Exit 18 consists of Pennsylvania Route 128 crossing or which used to be old 28 before the expressway. At exit 19, PA 28 merges with the limited-access US 422 and heads east along US 422 as it proceeds south of West Kittanning.[6]
Upon crossing the Allegheny River and entering Kittanning, US 422 and PA 28 interchange with Pennsylvania Route 66. PA 66 then joins the concurrency for two miles (3 km) to an exit with U.S. Route 422 Business southeast of downtown Kittanning. Here, US 422 leaves the freeway and heads east toward Indiana while PA 28 and PA 66 remain concurrent as they progress northward.
After crossing Redbank Creek, PA 28/PA 66 enters Clarion County and New Bethlehem. In downtown New Bethlehem, PA 66 splits off from PA 28 and making the PA 28/PA 66 concurrency one of the longest concurrencies in Pennsylvania. After the split, PA 28 heads northeast as Broad Street paralleling Redbank Creek. In Hawthorn, PA 28 is called Brookville Street and meets the western terminus of Pennsylvania Route 536. North of PA 536, PA 28 begins to slide to the north instead of the northeast.
In Summerville, PA 28's course begins to slide towards the northeast again and in Summerville, PA 28 is called Harrison Street. In Clover and Rose townships, PA 28 parallels many railroads tracks that even cross it.
In Brookville, PA 28 has a wrong-way concurrency with U.S. Route 322 and Pennsylvania Route 36. The reason of the wrong-way concurrency is that PA 28 is heading north while PA 36 is heading south on the concurrency with US 322. In downtown Brookville, PA 36 splits off from US 322/PA 28. Then after crossing North Fork Creek, US 322/PA 28 meet the southern terminus of the former Pennsylvania Route 968.
East of here, US 322 splits off from PA 28 at a "T" interchange. East of Brookville in Pine Creek Township, PA 28 intersects Interstate 80 at exit 81 a diamond interchange. North of I-80, PA 28 continues north as a local road without intersecting another route for more than 14 miles (23 km). PA 28 passes through the many wildlife in Pennsylvania through a forest region. In Brockway, PA 28 is called Main Street before terminating (ending) at a "T" intersection with U.S. Route 219.
History
In 1927, PA 28 was created, being signed on existing two laned roads from Pittsburgh to Kittanning.[4] The highway was signed to Brockway in 1928. That same year, the route was under construction from Blawnox to Cheswick, Troy Hill Road to Oakland, and Hazen to Reitz Crossing Road. Those sections were completed in 1929, at which point the section from Avella to Woodrow and from Hickory to Fort Cherry Road began construction.[7] In 1929, the segments from Blawnox to Cheswick, Troy Hill Road to Oakland, and Hazen to Reitz Crossing Road were completed.[7] By 1930, the roadway had been paved from Skyline Road to PA 18, and the segment from Blawnox to Cheswick had been opened to traffic. The southern terminus was also extended from Avella to Independence.[7]
In 1939, a new trumpet interchange connecting to the replacement Highland Park Bridge opened.
On July 15, 1960, the highway's southern terminus was moved from Independence to PA 8 in Etna. The former section of PA 28 from South Main Street in the West End Valley to the intersection of Noblestown Road and Crafton Boulevard in Crafton Heights was redesignated as PA 60. The remaining 83-mile stretch from Crafton Heights to Independence was renumbered PA 50. This designation change was made to reduce the number of concurrent routes in Pittsburgh. The changes took effect a few months later and signs were changed by the spring of 1961.[8]
In 1965, PA 28 was realigned onto Courthouse Road to bypass the more congested parts of Kittanning.[7]
In 1977, new emergency truck stopping lanes were constructed.[9]
In 1948, construction began on a new expressway bypass of the segment traveling through Millville. It was opened to traffic in 1950.[10] In 1957, construction began on another expressway bypass of Sharpsburg. This new alignment was opened to traffic on October 22, 1958.[10][11] At the same time a reconstruction of the road to expressway standards from Sharpsburg to Etna was completed.[12] In 1958, construction began on another stretch of freeway between PA 8 north to the Highland Park Bridge interchange. This opened to traffic in 1963, replacing the previous segment that ran through Etna.[10] In 1964, the roadway to Blawnox was opened, also part of this project was the reconstruction of the segment from Brackenridge and Butler to expressway standards.[7] That same year, the interchange with I-80 was opened.[13] In 1968, the segment to Fox Run Road was completed.[10] In 1972, the segment from Exit 16 to Armstrong County and from Blawnox to PA 910 and from Exit 15 to US 422 was opened to traffic. Construction on this section began in 1968.[7] In 1973, part of the roadway from Exit 11 to Exit 12 was opened. The route was also extended to end at US 19/PA 65 at Chateau Street via Western Avenue and East Ohio Street.[7] On October 17, 1980, the expressway from Exit 12 to the north border of Tarentum was opened to traffic, it was also extended onto a new at-grade segment.[9] The final stretch of the Allegheny Valley Expressway between Exit 13 and Exit 15 opened in 1985, PA 28 was subsequently removed from Freeport Road.[7]
In 1987, through traffic at the Highland Park interchange was restricted from two lanes to one lane, with deceleration lanes and emergency shoulders being added in their place. This was done to increase safety, as well better serve high demand for the bridge itself.
In 1989, a freeway portion from Ninth Street to East Ohio Street was opened to traffic.[7]
In 1993, PA 28’s northern terminus was relocated from the West End Bridge to the I-279 interchange, this made it so that the entire Allegheny Valley Expressway was signed as PA 28.[7]
In the late 1980s, plans to reconstruct the roadway from Millvale to Etna were made. This came after the section saw 169 accidents from 1982 through 1987, 96 of such were injuries, with 4 causing fatalities. Construction began on September 6, 1988, and involved blasting 600,000 cubic yards of rock from the hillside that parallels the highway to reduce slides, widening the lanes to 12 feet each, adding 10-foot-wide shoulders, adding should pull-off areas such as on the eastern segment, and placing a Jersey barrier in the middle of the four foot median. The Etna interchange received new lights and signage. The $14.4 million project that required four lanes of traffic to squeeze into two finally came to an end on December 7, 1990, due to rain hampering construction. Glare screen was erected on the Jersey barrier in 1991 to cut down on the effects of headlights from oncoming traffic. Due to the placement in the median instead of the outside due to the narrow right-of-way, the lights came online in 1995. Lighting standards were not installed because of financial uncertainty.[7]
On May 20, 1996, an act of the Pennsylvania legislature officially renamed the Allegheny Valley Expressway as the Alexander H. Lindsay Highway.[14]
On March 12, 2001, a $13 million project to reconstruct the roadway between exit 6 and exit 10 began. It concluded on September 20, 2001, half a million dollars under budget.[7]
As early as 1953, there had been proposals for a bypass of Kittanning due to heavy congestion.[9] Construction on this bypass began on March 24, 2000. It was opened to traffic on December 13, 2001.[7]
In 2003, after rocks and debris fell from a common rock fall segment of the roadway, it was decided to reduce the roadway from two to one lane in the southbound direction.[7]
In 2004, an interchange was opened in Harwick to serve the Pittsburgh Mills shopping center.[10]
In the spring of 2006, the 2.9 mile stretch of roadway south of exit 17 was rebuilt.[15]
In March 2007, a project to add a southbound truck climbing lane from Harmar and Harwick began. They would also repair the northbound roadway, install chain-link fencing, construct new catch basins, relocate the roadway in some areas, and reinforce concrete.[16] The project was completed in 2008.[7]
On March 31, 2008, construction began on a new ramp to I-279 southbound. The new $7.9 million ramp opened to traffic on September 25, 2008.[7]
A project to rebuild the PA 8 interchange began on August 16, 1999, when the off-ramp from PA 28 southbound from PA 28 northbound was closed for a total of $4.7 million. A new ramp was constructed, it was thicker and excavated in a way to lessen the threat of falling rocks. The project was completed on January 11, 2000. On April 26, 2004, more improvements began at the PA 8 interchange. Before work began, a water line was relocated and a 1,000-foot-long retaining wall built below. Ater this was completed, the through lanes were demolished and rebuilt from the ground up, and the ramp from PA 8 south was permanently closed and replaced by a new, differently constructed one. The $26,500,000 project finished on March 17, 2005. Further work at the PA 8 interchange began on June 7, 2009. This project involved demolishing the old one lane northbound overpass and replacing it with a two-lane overpass. It opened to one lane traffic on October 27, 2009 and opened fully a month later on November 25 drawing to a close the $22.5 million project. Another $27.2 project began at the PA 8 interchange on March 15, 2010. It consisted of roadway reconstruction, bridge replacement, bridge rehabilitation, wall construction, approach roadway widening, drainage, guide rail, concrete barrier, curb, landscaping, highway lighting, signing and pavement markings, signals, and improvements between Exit 4 and Exit 5. The majority of work was completed on December 3, 2010 when two-lane northbound traffic resumed, but minor work continued.[7]
In November 2009, a project began to rebuild the at-garde interchanges on East Ohio Street. The $24.8 million project included demolishing and relocating the Norfolk Southern rail lines, upgrading drainage, replacing the wired traffic signals with overhead gantry ones, utility reconstruction, and wall and bridge replacement along PA 28 from Chestnut Street to the 40th Street Bridge. Bridge pier reconstruction at the 31st Street Bridge, part of the project, involved closing the span on July 6, 2010 which gave commuters a reprieve from at least one signal until August 3, when the intersection was reopened with temporary signals.[7] In 2011, the southbound lanes of PA 28 were shifted to bypass the intersection of the 40th Street Bridge. The northbound lanes remained under the bridge.[17] The American Recovery and Reinvestment Act-funded work was completed by June 2012. In August 2012, an excavation lowered the roadbed of PA 28 at the 31st Street Bridge, which had been partially demolished to allow this.[17] All lanes were clear of lane closures and construction by November, 2014 when Governor Tom Corbett attended the official groundbreaking ceremony to celebrate all 44.5 miles being expressway-grade. The widening included a small park with a promenade and a retaining wall which features several murals on the city's history, including that of the Saint Nicholas Croatian Catholic Church on the aforementioned structure's site.[18] Despite being considered complete, various utilities were not completed until May 2015.[19]
In December 2023, the segment of roadway in Fox Chapel was reconstructed.[20]
On December 12, 2017, PennDOT announced a plan to widen the roadway to have two through lanes at the Highland Park interchange, though retaining the dedicated exit and entrance lanes for the exit approaches themselves. Work started in 2021. The project was completed in March 2024.[21]
In April 2024, signage updates were made to reduce the likelihood of wrong way driving.[22] Also, the Brockway intersection was altered.[23]
In early 2024, a project to reconstruct the roadway between exit 11 and exit 13 is expected to be completed.[24]
In November 2023, a new roadway was partially completed in Goheenville.[25] After the opening of the new roadway, the old roadway was then closed, with the rest of its replacement is expected to be completed by mid-2024.[26]
In June 2024, construction began on repairs to two structures in Armstrong County. This was completed in September 2024.[27]
In its 2015 transportation plan, the Pennsylvania Turnpike Commission (PTC) announced it was interested in building an extension of the Expressway to I-80. Studies for this project began in May 2019.[7]
The only things keeping PA-28 from having a interstate designation are the 45-mph speed limits near the Millvale and Etna Exits, as well as the section of the southbound one-lane expressway between Exit 9 (Blawnox Exit), and Exit 8 (Waterworks Exit). If these are ever to be upgraded to Interstate Highway standards, PA 28 will be up to Interstate Highway standards from its southern terminus all the way to Kittanning, and could potentially receive an Interstate designation in the future.[28]
Pennsylvania Route 28 Truck is a 3-mile-long (4.8 km) truck route in Brookville, Jefferson County, Pennsylvania. As Route 28 travels through the Brookville city center, it becomes a narrow main street and features a relatively sharp turn just west of the bridge over North Fork Creek. As a result, after the completion of Interstate 80, Route 28's truck traffic was shifted onto this freeway bypass from Exit 78 at Pennsylvania Route 36 (which Truck 28 is cosigned for its first 1/2 mile of existence) to Exit 81, where Route 28 meets the highway.