PROFILPELAJAR.COM

Crew: up to 4 flight crew
Capacity: 187 passengers / 35,000&#160;lb (15,876&#160;kg) payload
Length: 195&#160;ft (59&#160;m)
Wingspan: 121&#160;ft (37&#160;m)
Height: 48&#160;ft (15&#160;m)
Max takeoff weight: 480,000&#160;lb (217,724&#160;kg)
Powerplant: 4 × afterburning turbojet engines

North American NAC-60
	Side view of a North American NAC-60
Role	Supersonic transport
National origin	United States
Manufacturer	North American Aviation
Status	Canceled in 1967

The North American NAC-60 was the first American supersonic transport (SST) project. The development took place in the 1960s as part of a government-funded design competition to build an American SST^[1] as the joint Anglo-French Concorde and the short-serviced Soviet Tupolev Tu-144 were underway. The design, however, due to being slower and smaller than the expectations of the American SST Race, was rejected in favor of the Lockheed and Boeing designs, allowing them to get further study.

Design

In some respects, the NAC-60 was a scaled-up variant of North American's bomber prototype, the XB-70 Valkyrie. As with the B-70, the design of the NAC-60 did not include horizontal stabilizers at the tail structure, but did retain the high-mounted canard above the cockpit area, and the box-like engine area under the fuselage. The use of high-lift devices on the leading edge of the wing lowered the landing angles to the point where the "drooping nose" was not required, and a more conventional rounded design was used. Compared to the other designs, the rounded nose profile and more cylindrical cross-section gave the NAC-60 a decidedly more conventional look than the other entries. This also meant it would fly slower, at Mach 2.65.