The military time zones are a standardized, uniform set of time zones for expressing time across different regions of the world, named after the NATO phonetic alphabet. The Zulu time zone (Z) is equivalent to Coordinated Universal Time (UTC) and is often referred to as the military time zone. The military time zone system ensures clear communication in a concise manner, and avoids confusion when coordinating across time zones. The
CCEB, representing the armed forces of Australia, Canada, New Zealand, the United Kingdom, and the United States, publishes the military time zone system as the ACP 121 standard.[1] The armed forces of Austria and many nations in NATO use it.[citation needed]
Description
Going east from the prime meridian at Greenwich, letters "Alfa"[a] to "Mike" (skipping "J", see below) represent the 12 time zones with positive UTC offsets until reaching the international Date Line. Going west from Greenwich, letters "November" to "Yankee" represent zones with negative offsets.
The letters are typically used in conjunction with military time. For example, 6:00 a.m. in zone UTC−5 is written "0600R" and spoken "zero six hundred Romeo".
The numeric zone description or "plus and minus system" indicates the correction which must be applied to the time as expressed in order to convert to UTC. For example, the zone description for the Romeo time zone is +5. Therefore, adding 5 hours to 0600R produces the time in UTC, 1100Z.[1]
The letter "J" ("Juliet"), originally skipped, may be used to indicate the observer's local time.[2] The letter 'L' was previously misidentified in some editions of U.S. Army publications, such as FM 5-0,[3] as representing 'Local' time, which conflicted with its established use for the Lima time zone (UTC+11). This error has been rectified in the latest edition of FM 5-0, released in May 2022,[4] which no longer includes this incorrect usage. "LT" may also (rarely) be used to denote local time.[5]
The letter "N" is also used to designate zone −13; this is to provide for a ship in zone −12 keeping Daylight Saving Time.[1]
The ACP 121 standard actually refers to Greenwich Mean Time (GMT) as the base time standard,[1] but UTC has superseded GMT as a more precise time standard,[6] so the time offsets are commonly understood as UTC.[7][8]
History
Sandford Fleming devised a system assigning the letters A–Y excluding J to 1-hour time zones, which may have been the inspiration for the system.[9]
The standard was first distributed by NATO as a note in 1950. The note states "This method is based on the systems in use in the Armed Forces of these countries and the United States".[10] The British used a system of lettered zones, which was likely the direct influence.[11][better source needed]
RFC 733 published in 1977 allowed using military time zones in the Date: field of emails.[12] RFC 1233 in 1989 noted that the signs of the offsets were specified as opposite the common convention (e.g. A=UTC−1 instead of A=UTC+1),[13] and the use of military time zones in emails was deprecated in RFC 2822 in 2001. It is recommended to ignore such designations and treat all such time designations as UTC unless out-of-band information is present.[14]
^"Plans and Orders: Expressing Time", Army Planning and Orders Production, Field Manual 5-0 (FM 101-5)(PDF), Headquarters Department of the Army, United States Army, 20 January 2005, p. G11, Express all times in a plan or order in terms of one time zone, for example ZULU (Z) or LOCAL (L). I
^FM 5-0: Planning and Orders Production. Headquarters, Department of the Army. May 2022. pp. D-6.
^Stromberg, Joseph (November 18, 2011). "Sandford Fleming Sets the World's Clock". Smithsonian Magazine. To this day, if you look at certain [military] maps that divide the world into time zones, the zones are assigned letters,