In 1926, the Michigan State Highway Department (MSHD) improved M-28, by adding several miles of gravel roads and replacing some bridges, including this one over the Tahquamenon River. The department designed the bridge and solicited bids for its constructions. Walter Toebe and Company of Shingleton was awarded the contract to construct the bridge, and built it in 1926 for a cost of $24,286.08.[2] It was listed on the NRHP on November 30, 1999.[1]
Historic context
The MSHD standardized the designs of steel stringer bridges in 1905–06 and plate girder bridges in 1907–08. However, it was not until 1926, the year this bridge was built, that the department began encasing the steel girder webs in concrete. Why they did so is not entirely clear, and indeed the department abandoned the practice of encasing interior girders soon after.[3] However, they continued encasing the exterior beams in concrete, and continued using the concrete balusters pioneered with this bridge design, and this bridge can be considered a prototype for numerous, similar bridges built by the department in the next decade.[4] The Tahquamenon River Bridge is one of only two remaining bridges of this type in Michigan.[3]
Description
The M-28–Tahquamenon River Bridge is plate girder bridge built of nine steel girders encased in concrete.[3] The girders are braced by concrete diaphragms and sit on large concrete abutments. The bridge spans 55 feet (17 m), and is 35 feet (11 m) wide with a 30-foot-wide (9.1 m) roadway. A concrete deck covered with asphalt sits atop the bridge, and the roadway is lined with concrete guardrails made from fluted balusters and paneled bulkheads.[2]
