Partially completed Interstate Highway in North Carolina
This article is about the Interstate Highway in North Carolina. For the proposed Interstate Highway in Oklahoma and Arkansas, see U.S. Route 412 in Oklahoma.
Interstate 42 (I-42) is a partially completed Interstate Highway in the US state of North Carolina, currently existing in two separate segments in the eastern part of the state, totaling up to 31.5 miles (50.7 km). Both segments are entirely concurrent with US 70. The completed and signed segments of I-42 currently run from I-40 eastwards along the 9.8-mile (15.8 km) Clayton Bypass to an interchange with Business US 70 southeast of Clayton. The Interstate resumes again along the Goldsboro Bypass, running for 21.7 miles (34.9 km) north of Goldsboro, ending again at US 70. The Interstate eventually will run from I-40 to Morehead City, where it will terminate along the Northern Carteret Bypass, north of Beaufort. I-42 also overlaps the Clayton Bypass Scenic Byway, from I-40 to US 70 Bus.[4]
Route description
The Clayton Bypass is a four-lane freeway that is 9.8 miles (15.8 km) in length south of Clayton. Starting west of Clayton at a turbine interchange with I-40 and I-540 on the Wake–Johnston county line, it continues southeast and connects with NC 42 and Ranch Road, before reaching an interchange with US 70/US 70 Bus., where US 70 merges into the through traffic. Mile markers along the route are based on I-42 and the speed limit is 70 miles per hour (110 km/h) throughout.
The Goldsboro Bypass is a four-lane freeway that is 21.7 miles (34.9 km) in length north of Goldsboro, connecting with US 70 at both ends. Starting west of Goldsboro, it splits off from US 70, which continues on towards Goldsboro. In a northeasterly direction, it connects with NC 581, I-795 and US 117, where it turns southeasterly. After connecting with Wayne Memorial Drive, US 13, and Parkstown Road, it merges back as the through traffic with US 70 near La Grange. Mile markers along the route are based on I-42 and the speed limit is 70 miles per hour (110 km/h) throughout. The bypass serves both as a strategic transportation corridor for North Carolina and part of the Strategic Highway Network (STRAHNET).[5]
History
A multi-county project, also known as the "US 70 Corridor" or "Super 70", is a collection of several projects along US 70 to improve passenger and freight movement eventually leading to the establishment of Interstate 42 (I-42),[6] which is the US Department of Transportation's High Priority Corridor #82.[7] The Fixing America's Surface Transportation Act (FAST Act), signed by then President Barack Obama on December 14, 2015, added the US 70 corridor between Garner and Morehead City to the Interstate system as a future Interstate. Justification for the designation included better connections with Seymour Johnson Air Force Base, the North Carolina Global Transpark, Marine Corps Air Station Cherry Point, and the Port of Morehead City with the rest of state and the eastern seaboard.[8][9][10][11] With no specified number codified in the act, the Regional Transportation Alliance (RTA) expected this corridor to be called Interstate 46 (I-46) or another suitable designation, and the US Highway 70 Corridor Commission recommended Interstate 50 (I-50).[12][13] On March 30, 2016, Governor Pat McCrory and various officials unveiled "Future Interstate" signage along the corridor.[14]
For the Spring 2016 AASHTO Special Committee on U.S. Route Numbering, NCDOT proposed Interstate 36 (I-36) for this route since there were no other routes with that number in the state.[15] However, on May 24, 2016, AASHTO assigned Interstate 42 for the route.[16] The entire project has a budgeted cost (as of late 2018) of about $1.3 billion, and about 29 miles still without a budget. Some projects like the Clayton and Goldsboro bypasses are completed, while others have yet to be scheduled.[17][18]
In October 2021, AASHTO approved two segments of I-42, the 10-mile (16 km) Clayton Bypass and the 21.7-mile (34.9 km) Goldsboro Bypass; this was followed by the Federal Highway Administration subsequent approval in March 2022.[19][20] In May 2022, AASHTO also approved the elimination of US 70 Bypass, clearing the way for NCDOT to fully redesignate the route.[21] Signage for the route was expected to be put up later in 2022, but took a few years to take place, with signage going up in the later part of 2024. In July 2023, NCDOT announced that they were proposing to renumber NC 42 to NC 36 (which was the number originally suggested for the new interstate before 42 was chosen) between NC 50 and U.S. Route 70 Business (US 70 Bus) in Clayton in order to avoid confusing motorist when the Clayton bypass is designated as I-42.[15][22] Once I-42 is fully completed on the Clayton Bypass and the project with nearby NC 540 is completed, US 70 will be rerouted onto its old routing through Clayton, which is currently designated as US 70 Bus.[23][24] NCDOT requested public input on this proposal at an open house on October 12, 2023.[25][26] US 70 has also been upgraded to interstate highway standards between Dover and New Bern, but this cannot be signed as I-42 until the Kinston Bypass is completed as this segment is not connected to the Interstate highway system. I-42 signage began being installed on September 16, 2024, on the Goldsboro Bypass, marking its establishment. Additionally, signage for I-42 has been installed on overhead signs at its western terminus, although the signing of the Clayton Bypass itself is not expected until 2025.[3] I-42 is expected to be completed in its entirety by 2032 and will include the installation of broadband fiber along the entire route.[27][28]
Clayton Bypass
On June 9, 2008, the Clayton Bypass opened, redirecting US 70 onto I-40 between exits 306 to 309 and then on a new 10.7-mile (17.2 km) four-lane freeway bypass south of Clayton.[29][30] Planning for the bypass began in 1991, but construction did not start until 2005 because of several delays regarding the dwarf wedgemussel, an endangered species, habitat in the area. Originally scheduled for completion in June 2009, a severe drought in 2007–2008 allowed construction to proceed more rapidly than anticipated.[31][32] NCDOT was given the approval by AASHTO to officially designate US 70 along the bypass on May 6, 2008, with the former alignment becoming an extension of US 70 Bus.[33] Compared to the former alignment through Clayton, the bypass is estimated to cut fifteen minutes of travel time for drivers traveling between Raleigh and eastern North Carolina.[34][35]
Construction started on the 3.9-mile (6.3 km) central section of the Goldsboro Bypass on October 9, 2008; its contract was awarded to Barnhill Contracting Co. of Tarboro.[38] At a cost of $65.5 million (equivalent to $87.6 million in 2023[39]), it features three interchanges connecting I-795, US 117 and Wayne Memorial Drive (SR 1556).[40] On December 16, 2011, the central section became the first segment of the Goldsboro Bypass to open; signed as NC 44.[41]
In 2012, both eastern and western sections of the bypass began construction. The 12.5-mile (20.1 km) eastern section's contract was awarded to Barnhill Contracting Co. in February, at a cost of $104.4 million (equivalent to $137 million in 2023[39]). The 5.9-mile (9.5 km) western section's contract was awarded to S.T. Wooten in July, at a cost of $62.4 million (equivalent to $81.9 million in 2023[39]).[2] On September 25, 2015, the American Association of State Highway and Transportation Officials (AASHTO) approved the establishment of US 70 Byp., dependent on the completion of the Goldsboro Bypass.[5][42] On October 17, 2015, the western section became the second segment to open; connecting US 70 and I-795, with an interchange at NC 581.[43][44][45]
The eastern or last section of the Goldsboro Bypass was opened on May 27, 2016; from Wayne Memorial Drive (SR 1556) to US 70, with interchanges at US 13 and Parkstown Road (SR 1714).[2] The section opened with a ribbon cutting ceremony and all signage that formally delineate NC 44 would be changed to US 70 Byp. after the event.[37]
On June 5, 2021, a 5-mile (8.0 km) section was dedicated to former Goldsboro Mayor Chuck Allen.[46]
In September 2024, signage on I-42 began to replace US 70 Bypass signage along the bypass, indicating again another route change to the Goldsboro bypass. It is expected to take a few months until all signage of US 70 Bypass is replaced entirely by I-42.[47]
Future
Wilson's Mills improvements
A 5-mile (8.0 km) section of US 70 at Wilson's Mills, connecting to the Clayton Bypass in the west will be upgraded to a freeway for an estimated $31 million.[48] The plan calls for US 70 to be carried on a bridge over Wilson Mills Road while a bridge will carry Swift Creek Road over US 70.[49] Interchanges will be made at both roads and a connector road paralleling US 70 between the two roads will also be built. Construction was planned to begin in 2020 and finish around 2022.[48] However, COVID-19 funding issues postponed the awarding of the construction contract from September 2020 to March 2021. Construction officially began on May 12, 2021, and is expected to be completed by the middle of Fall 2024. The Swift Creek Road exit was partially opened to traffic in Spring 2024.[50][51]
Smithfield/Selma improvements
Improvements are in the planning stages for the 13.8-mile (22.2 km) segment of US 70 between Wilson's Mills and Princeton. Some of this section is already a freeway but will require improvements to bring it up to interstate standards and add an interchange with I-95. Adding the interchange will require shifting I-95, which is going to be widened in this area, 2,000 feet (610 m) east to incorporate the new changes.[52] This proposed project is still in the study phase and not currently budgeted nor does it have a timeline for completion.[53] I-95 and US 70 Business Route (exit 95) is being reconstructed though.[54]
Princeton Bypass to Goldsboro Bypass
The existing Princeton Bypass eastward to the Goldsboro Bypass will be improved to interstate standards, which is estimated to cost $170 million.[55][56][57] The 6.7-mile (10.8 km) project for the upgrade of US 70 will be done in two parts: the first will be in the Princeton area between US 70A to North Pearl Street/Edwards Roads (construction is scheduled to start in 2025) with second part starting there and ending at the Goldsboro Bypass (construction is scheduled to start in 2028). Currently, project funding has been suspended by NCDOT due to agency's budget issues. The agency is currently working with state legislators to find alternative sources of revenue.[57]
Kinston Bypass
The Kinston Bypass is a project that has been in the planning stages since the 1990s. The project was put on hold until 2007 when NCDOT revitalized the project. While several northern bypasses were planned, in January 2014, the northern bypasses were removed in favor of a southern alternative, but the project was defunded in 2014 with the release of the 2015–2024 State Transportation Improvement Plan, and studies were suspended.[58] In June 2022, NCDOT announced that they had chosen Alternative 1SB for the Kinston Bypass. This alternative would be approximately 21 miles (34 km) of a four-lane, median divided freeway accessible via ramps at 10 interchanges.[59] Part of the project will also build service roads along the freeway as well as approximately 6.5 miles (10.5 km) of new roadway that will be south of the current US 70 alignment in the Kinston area.[60] When complete, the bypass would improve regional mobility, connectivity, and capacity for US 70, reducing traffic congestion and delays that exist along US 70 between La Grange and Dover.[61] The westernmost section, which is approximately 2.8 miles (4.5 km) and includes the interchange at Jim Sutton Road/Willie Measley Road, was included in NCDOT 2018-2027 State Transportation Improvement, which allowed preliminary engineering activities to resume.[62] The four remaining sections east of this section were reinserted into 2024-2033 STIP Projects Map. However, as of 2023, no funding has been set aside for the project, which is expected to cost $716.2 million.[61] Additionally, the easternmost interchange between US 70/Future I-42 and Caswell Station Road/Wyse Fork Road east of Kinston currently faces local opposition due to it impacting part of the land where the Battle of Wyse Fork was fought on.[63][64]
James City freeway
In James City, a 5.1-mile (8.2 km) segment of the US 70 improvement project will upgrade the existing highway to freeway standards by elevating it over existing surface streets as a six-lane, median divided freeway, improving the frontage roads, removing 49 businesses and 17 homes, converting the five intersections along this segment to interchanges with all but one of them being dogbones (the other will be a parclo), and eliminating a railroad crossing just south of exit 417.[65][66] The project, which is projected to cost $66 million, will connect to the existing US 70 freeway in New Bern. Construction was scheduled to begin in early 2020 and be complete in early 2024.[67] However, the design-build project did not start until January 2021 and its completion was delayed by a year to the end of 2024.[68] Construction on the project finally began in Spring 2022[69] and as of February 2023, the project is about 1⁄3 completed.[70] However, its completion has been delayed again, this time to middle of 2025.[69]
James City to Havelock
Between James City and Havelock, a 6.4-mile (10.3 km) section of US 70 will be converted to interstate standards.[71] The final cost of the project is estimated to be $275.161 million with $147 million coming from a federal grant the state received in 2018.[72][73] This segment will be a four-lane, median divided freeway accessible via ramps at three interchanges.[72] With the release of the 2020 draft STIP, it was revealed that NCDOT was attempting to start construction in 2020, but this was delayed several times due to design and funding issues before a $242.35 million design-build contract for construction was finally awarded to Balfour Beatty in February 2023. Right-of-way acquisition will begin in Fall 2023 with construction beginning in Spring 2024. Completion is set for Summer 2028.[72][70][74][75]
Havelock Bypass
The Havelock Bypass is a planned 10.1-mile (16.3 km) four-lane freeway intended to improve existing sections of US 70 and a bypass west of Havelock, through the Croatan National Forest. The routing through Havelock would become US 70 Bus. Draft and environmental studies began in September 2011 and were completed in January 2016. Property acquisition started in 2016, with construction expected to begin in February 2019 and be completed in 2022 at an estimated cost of $173 million.[76] However, construction did not officially begin until August 2019 and with its completion set for May 2024;[70][77] it was later changed to late-Summer 2024.[78] Since that time, the completion has been pushed out to Fall 2025 due to weather delays, although the US 70 east overpass at the east end of the bypass was opened to traffic on June 20, 2024.[79][80] According to Balfour Beatty, the project includes the construction of 15 bridges, which will require around 4.43 million cubic meters of borrow material and 288,000 tonnes of asphalt.[81]
Havelock Bypass to Morehead City
The Newport River Bridge will be reconfigured from two-lanes to four-lanes.[82][83]
Northern Carteret Bypass
According to the Comprehensive Transportation Plans from Carteret and Craven counties, I-42 is proposed to be routed on a new alignment which will be called the Northern Carteret Bypass. It will pass north of Morehead City before curving back south and terminating at US 70 north of Beaufort.[84] This was further confirmed when the ECC (Eastern Carolina Council) noted that I-42 would likely be built to bypass Morehead City to the north due to the inability to build it through the city itself. However, no funding has been provided for this bypass as of 2024.[70]
^ abcdefNorth Carolina Department of Transportation. "NCDOT: US 70 Goldsboro Bypass". North Carolina Department of Transportation. Retrieved October 17, 2015.
^Special Committee on U.S. Route Numbering (May 24, 2016). "Special Committee on U.S. Route Numbering"(PDF) (Report). Washington, DC: American Association of State Highway and Transportation Officials. p. 7. Archived from the original(PDF) on December 16, 2017. Retrieved May 26, 2016.
^"NCDOT: US 70 Corridor". North Carolina Department of Transportation. Archived from the original on April 6, 2016. Retrieved April 6, 2016.
^North Carolina Department of Transportation (January 2016). US 70 Corridor - NCDOT Project Locations(PDF) (Map). North Carolina Department of Transportation. Archived(PDF) from the original on April 7, 2016. Retrieved April 6, 2016.
^"US 70 Clayton Bypass". North Carolina Department of Transportation. Archived from the original on February 22, 2012. Retrieved April 3, 2016.
^"Route Change (2008-06-20)"(PDF). North Carolina Department of Transportation. June 20, 2008. p. 2. Archived(PDF) from the original on December 30, 2016. Retrieved April 3, 2016.
^Special Committee on U.S. Route Numbering (May 4, 2008). "Special Committee on US Route Numbering Decisions" (Report). Washington, DC: American Association of State Highway and Transportation Officials. Archived from the original(MHT) on October 16, 2017. Retrieved April 3, 2016.
^North Carolina Department of Transportation (January 12, 2016). "Route Changes"(PDF). Highway Traffic Ordinance. Raleigh: North Carolina Department of Transportation. p. 5. Retrieved February 15, 2016.