The Rothesay-class was an improved version of the Whitby-class anti-submarine frigate, with nine Rothesays ordered in the 1954–55 shipbuilding programme for the Royal Navy to supplement the six Whitbys.[1]
Brighton was 370 feet 0 inches (112.78 m) long overall and 360 feet 0 inches (109.73 m) between perpendiculars, with a beam of 41 feet 0 inches (12.50 m) and a draught of 13 feet 6 inches (4.11 m).[2] The Rothesays were powered by the same Y-100 machinery used by the Whitby-class. Two Babcock & Wilcoxwater-tube boilers fed steam at 550 pounds per square inch (3,800 kPa) and 850 °F (454 °C) to two sets of geared steam turbines which drove two propeller shafts, fitted with large (2 feet (0.61 m) diameter) slow-turning propellers. The machinery was rated at 30,000 shaft horsepower (22,000 kW), giving a speed of 29.5 knots (33.9 mph; 54.6 km/h).[3][4] Crew was about 212 officers and men.[2][a]
A twin 4.5-inch (113 mm) Mark 6 gun mount was fitted forward, with 350 rounds of ammunition carried. It was originally intended to fit a twin 40 mm L/70 Bofors anti-aircraft mount aft, but in 1957 it was decided to fit the Seacat anti-aircraft missile instead. Seacat was not yet ready, and Brighton was completed with a single L/60 40 mm Bofors mount aft as a temporary anti-aircraft armament.[6] The design anti-submarine armament consisted of twelve 21-inch torpedo-tubes (eight fixed and two twin rotating mounts) for Mark 20E Bidder homing anti-submarine torpedoes, backed up by two Limbo anti-submarine mortars fitted aft. The Bidder homing torpedoes proved unsuccessful however, being too slow to catch modern submarines, and the torpedo tubes were soon removed.[7]
The ship was fitted with a Type 293Q surface/air search radar on the foremast, with a Type 277 height-finding radar on a short mast forward of the foremast. A Mark 6M fire control system (including a Type 275 radar) for the 4.5 inch guns was mounted above the ship's bridge, while a Type 974 navigation radar was also fitted.[8][9] The ship's sonar fit consisted of Type 174 search, Type 170 fire control sonar for Limbo and a Type 162 sonar for classifying targets on the sea floor.[9]
From August 1968 to 18 February 1972 Brighton underwent a major modernisation, which brought the ship close in capability to the Leander-class.[11][12][13] A hangar and flight deck was added aft to allow a Westland Wasp helicopter to be operated, at the expense of one of the Limbo anti-submarine mortars, while a Seacat launcher and the associated GWS20 director was mounted on the hangar roof. Two 20-mm cannons were added either side of the ship's bridge. A MRS3 fire control system replaced the Mark 6M, and its integral Type 903 radar allowed the Type 277 height finder radar to be removed. A Type 993 surface/air-search radar replaced the existing Type 293Q radar, while the ship's defences were enhanced by the addition of the Corvus chaff rocket dispenser.[13][14]
Service
After commissioning and work-up, Brighton joined the 6th Frigate Squadron and in 1963 joined the 30th Escort Squadron.[15] In June 1965, she sailed for the Far East, carrying out anti-infiltration patrols during the Indonesia–Malaysia confrontation as well as taking part in a joint exercise with the US Navy in the South China Sea, before returning to Britain on 15 December that year.[16] In August 1966, she left British waters to take part in the Beira Patrol, operating off East Africa for almost four months, before diverting to Singapore in December that year.[17] In January 1968, Brighton served as leader of the newly established NATO Standing Naval Force Atlantic (STANAVFORLANT).[15][18]
She was offered for sale to friendly nations, as a result of the 1981 Nott Defence Review, paid off in November 1981, the first of her class to be disposed-of.
She was sold for scrap to Dean Marine in 1985, arriving at their Medway yard for breaking up on 16 September 1985.[20]
Notes
^Conway's states the crew of a Rothesay ranged from 200–235,[1] while Jane's Fighting Ships 1962–63 states a crew of 200 (9 officers and 191 ratings)[5]
.jpg)
