PROFILPELAJAR.COM

Fujifilm X-Pro3
	X-Pro3; +XF18mm-55mm F2.8-4 R LM OIS
Overview
Maker	Fujifilm
Type	Mirrorless camera
Released	October 23, 2019
Intro price	USD 1,799 (body)
Lens
Lens mount	Fujifilm X
Lens	Interchangeable lens
Sensor/medium
Sensor type	X-Trans CMOS 4
Sensor size	23.5 mm x 15.6 mm ; (APS-C)
Sensor maker	Sony
Maximum resolution	6240 x 4160; (26.1 megapixels)
Film speed	160–12800 (standard) ; 80–51200 (extend)
Recording medium	SD, SDHC, SDXC ; V30, UHS-II, UHS-I
Storage media	SD card
Focusing
Focus	Intelligent Hybrid TTL contrast detection / Phase detection
Focus modes	Single point, Zone, Wide/Tracking
Focus areas	91 focus point
Focus bracketing	Auto, Manual
Exposure/metering
Exposure	TTL 256-zones metering
Exposure modes	Program, Aperture Priority, Shutter Speed Priority, Manual Exposure
Metering modes	Multi, Spot, Average
Flash
Flash	External Flash
Flash synchronization	1/250 s
Flash bracketing	±1/3EV, ±2/3EV, ±1EV
Compatible flashes	Dedicated TTL Flash compatible
Shutter
Shutter	Focal Plane Shutter
Shutter speeds	4 s to 1/8000 s (mechanical), ; 4 s to 1/32000 s (electronic)
Continuous shooting	30 frames per second
Viewfinder
Viewfinder	0.5 in 3.69M dots OLED, ; Hybrid OVF and EVF
Viewfinder magnification	0.66
Frame coverage	100%
Image processing
Image processor	X-Processor 4
White balance	Auto, Custom, Preset, Fluorescent, Incandescent, Underwater
WB bracketing	±1, ±2, ±3
Dynamic range bracketing	100%, 200%, 400%
General
Video recording	MP4 / MOV; DCI 4K up to 30 fps,; 4K up to 30 fps,; 1080p up to 120 fps
LCD screen	3.0 in 1.62M dots ; Hidden-tilt touchscreen
Battery	NP-W126S Li-ion
AV Port(s)	2.5 mm audio jack
Data Port(s)	USB-C 3.1,; Wi-Fi 4,; Bluetooth 4.2
Body features	Ultra Sonic Vibration Sensor Cleaning system
Dimensions	140.5 mm × 82.8 mm × 46.1 mm (5.53 in × 3.26 in × 1.81 in)
Weight	497 g (1.096 lb) ; without battery and memory card
Made in	Japan
Chronology
Predecessor	Fujifilm X-Pro2
References

The Fujifilm X-Pro3 is a mirrorless interchangeable-lens digital camera announced on October 23, 2019.^[3]^[4] It is part of Fujifilm's X-Series of cameras, the successor to the X-Pro2. Sales began on November 28, 2019.^[5]

X-Pro3 is the latest release of the series.

Features

The overall design follows traditional range finder cameras much like the X-Pro 1 and X-Pro 2 before it but like those cameras it is a traditional mirrorless camera but with the addition of an Optical View Finder to complement the Electric View Finder.

A lever on the front of the camera switches between EVF and OVF with the OVF providing clear framelines and the view outside of these framelines leading to the X-Pro series being popular with street photographers to see what might be entering their shot.

The camera's top and base plates are made from titanium, and the rest of the body shell is made from magnesium alloy.^[6] A variant with a harder wearing DuraTect finish for the titanium top and base plates is scheduled to be available from 8 December 2019.^[7] Reviewers have indicated the latter finish accentuates fingerprints.^[6]^[7]

Another notable design change from previous X-Pro models is the X-Pro3's hidden display. The camera's main LCD screen is mounted on an inward facing hinge and must be opened downwards for viewing or waist level shooting, leaving the screen hidden and the rear of the camera protected when not in use. ^[7] On the back side of the LCD screen (viewable when the LCD is not) is a secondary unlit display which can be used to display the camera's settings or the film simulation in use.

The X-Pro3 does not have in-body image stabilization.^[8] The autofocus works down to -6 EV (near darkness).^[8]