PROFILPELAJAR.COM

External image
External image
	1988 Nissan Ute print advertisement

Ford XF Falcon
Ford XF Falcon
	Ford XF Falcon 25th anniversary sedan
Overview
Manufacturer	Ford Australia
Also called	Nissan Ute (XFN) (utility 1988–1992);
Production	October 1984 – February 1988 (sedan, wagon); October 1984 – March 1993 (utility, panel van)
Body and chassis
Class	Full-size
Body style	2-door coupé utility; 2-door panel van; 4-door sedan; 5-door station wagon
Related	Ford ZL Fairlane; Ford FE LTD
Powertrain
Engine	3.3 L I6; 4.1 L I6 (Carburetor); 4.1 L I6 (EFI)
Transmission	3-speed automatic (column, floor) ; 3-speed Borg Warner 0501 manual (column) ; 4-speed Borg Warner 0503 manual (floor) ; 4-speed Borg Warner 0506 manual (floor) ; 5-speed Borg Warner 0507 manual (floor)
Dimensions
Length	4,775 mm (188.0 in)
Width	1,860 mm (73.2 in)
Height	1,367 mm (53.8 in)
Curb weight	1,333 kg (2,939 lb)
Chronology
Predecessor	XE Falcon
Successor	EA Falcon (sedan, wagon); XG Falcon (utility, panel van)

The Ford Falcon (XF) is a full-sized car that was produced by Ford Australia from 1984 to 1988. It was the third iteration of the fourth generation of the Falcon and also included the Ford Fairmont (XF)—the luxury-oriented version. Between 1993 and 1999, this series provided the platform for the Falcon utility (XG and XH) that was sold alongside the fifth-generation Ford Falcon sedans and wagons^{[broken anchor]}.

Overview

The XF sedan and wagon range was sold between October 1984 and February 1988,^[1] with the utility and panel vans running through to March 1993.

In 1980, Ford Australia planned to phase out the full-size, rear-wheel drive Falcon after the 1982 XE model. It was to be replaced by a smaller front-wheel drive car derived from the Ford Telstar/Mazda 626 platform, in a program dubbed Project Capricorn. However, the market success of the XD Falcon against the smaller Holden Commodore saw Bill Dix, who became CEO in 1981, cancel the project. Ford instead began development of the EA26 Falcon program, a new full-size, rear-wheel drive car range. The XF Falcon was conceived as an interim facelift for the XE Falcon until the all-new car was ready to go on sale.^[2]

The XF Falcon continued the sales leadership of its predecessor. It remains Ford Australia's best-selling Falcon model ever with 278,101 built. The production total was boosted by a prolonged run of the utility and panel van models, Ford not having developed an EA Falcon-based replacement for the commercial vehicle range.^[3]

Powertrains

XF models were available with a choice of 3.3 or 4.1-litre engine six-cylinder engines.^[4] The 4.1-litre unit was standard on Fairmont models and the S-Pack.^[5]

Power and torque outputs for the carburetted 3.3 and 4.1 litre engines saw little or no change from the preceding XE series; engineering revisions were aimed at improving fuel economy and driveability.^[6] The 3.3 litre engine's maximum power and torque outputs remained at 90 kW (120 hp) and 240 N⋅m (180 ft⋅lb). Maximum power for the 4.1 litre engine decreased slightly from 105 to 103 kW (141 to 138 hp), while torque increased from 310 to 316 N⋅m (229 to 233 ft⋅lb)^[7]^[6]

The optional 4.1 litre EFI engine underwent a significant upgrade for the XF series, with a switch from Bosch Jetronic LE to Ford's EEC IV electronic fuel injection system. Maximum power output increased from 111 kW (149 hp) to 120 kW (160 hp), and maximum torque increased from 325 N⋅m (240 ft⋅lb) to 333 N⋅m (246 ft⋅lb).^[3] An XF Falcon S-Pack equipped with the EFI engine and four-speed manual transmission tested by Wheels magazine in 1984 accelerated from 0 to 100 km/h (62 mph) in 9.3 seconds, ran the standing 400 metres (0.25 mi) in 16.4 seconds, and ran to its 4500 rpm redline in fourth gear for a top speed of 190 km/h (118.1 mph).^[6] These performance metrics were only marginally behind the respective 8.9 seconds, 16.3 seconds and 194 km/h (120.5 mph) recorded for a 1982 XE Fairmont Ghia ESP equipped with a 5.8 litre V8 and four-speed manual transmission.^[8]

From 1 January 1986, Australian Design Rule 37 came into effect, requiring all new cars to be equipped for operation with unleaded petrol.^[9] ADR 37 specified emissions standards that Ford met by the fitting the Falcon with a catalytic converter, and Falcon engines were modified for running on regular grade 91 RON unleaded fuel. Power and torque outputs for the carburetted engines fell slightly; the 3.3 now produced a maximum 88 kW (118 hp) and 235 N⋅m (173 ft⋅lb), and the 4.1 produced a maximum 97.5 kW (130.7 hp) and 316 N⋅m (233 ft⋅lb). Conversely, maximum power output from the 4.1 EFI engine increased slightly to 121 kW (162 hp), although torque fell to 325 N⋅m (240 ft⋅lb).^[3]

Transmissions available were 3 speed column shift, four- or five-speed manual floor shift, or the much more popular three-speed automatic with the selector lever located either on the floor or the column in cars that seat six. In three-seat utilities and vans, the three-speed manual on the column was standard.

In October 1986 a further update was released, which saw availability of the five-speed manual transmission, previously only available with the 3.3 litre engine, extended to both carburetted and fuel-injected 4.1 litre engines.^[4] Equipped with a 4.1 litre engine and five-speed transmission, the Falcon GL sedan's fuel economy was quoted as 11.5 l/100 km (25 mpg_‑imp) city cycle and 8 l/100 km (35 mpg_‑imp) highway cycle.^[4]

Specification levels

Falcon (utility and panel van)
Falcon GL (utility, panel van, sedan, and wagon)
Falcon GLS Ute (utility) ^[10]
Fairmont (sedan and wagon)
Fairmont Ghia (sedan and wagon): the luxury Ghia featured a 4.1-litre fuel-injected or carburettor inline six-cylinder engine, and a trip computer that calculated fuel consumption and driving times, among other things. The drive line consisted of a BW40 three-speed auto with either a 2.77 or 2.92 LSD and four-wheel disc brakes. A wagon variant of the Ghia was made available from October 1986.^[11]

The ride and handling were described as competent, but the unpowered steering was heavy at low speeds with an overly strong castor action after performing a manoeuvre such as a U-turn. Power steering was an option on higher-specification models, which in contrast was described by some as too light.

An optional "S" pack was available on some models, featuring body stripes, fog lamps, styled wheels, Falcon "S" badging, steering rake adjustment, driver's lumbar support, driver's seat tilt and footrest, and sports instrument cluster.^[4]

Ford produced some limited-edition, value-packaged vehicles during the XF series, including the Falcon Silver Edition sedan of 1985 to commemorate the 25th anniversary of the Ford Falcon in Australia. Also, a six-seater GL-based Falcon Family Edition sedan and wagon were offered in 1986. These limited-edition vehicles featured unique versions of two-tone "style-tone" paintwork.

1986–1988 Ford Falcon GL sedan
1987 Ford Falcon GL wagon
1985 Ford Falcon Silver Anniversary sedan
Ford Fairmont sedan
1986–1988 Ford Fairmont Ghia sedan
1990–1993 Ford Falcon utility
1988–1990 Ford Falcon utility
Ford Falcon Van (XF)

Nissan Ute

The Nissan Ute was a badge-engineered version of the XF Falcon utility sold by Nissan in Australia from July 1988 to September 1992.^[12] Nissan Utes were sold as a result of a model-sharing scheme known as the Button car plan. In an attempt to rationalise the Australian automotive industry, the Button plan induced car manufacturers to share core platforms. For this particular vehicle, XF series Ford utility vehicles were rebadged as "Nissan".

Nissan did not offer the various equipment levels of the Ford donor vehicle, instead offering only two basic trims (DX and ST) without the option of an "S" pack. The plan was generally considered a "disaster" by the industry, as the car buying public steered clear of the badge-engineered vehicles. Furthermore, spare parts could often be purchased from only the original vehicle maker—as was the case with the Nissan Ute. The model code was "XFN".

Motorsport

Due to the lack of a V8 engine, the XF Falcon was not suitable for involvement in the Australian Touring Car Championship, with most Ford supporting drivers and/or teams electing to race the Ford Mustang or Ford Sierra RS Cosworth under the new Group A regulations.

The XF Falcon, however, was raced in the AUSCAR series, with Jim Richards winning the first AUSCAR series in a XF Falcon. XF AUSCAR's were fitted with 5.8 L 351 Cleveland V8s (subsequent Falcon models in AUSCAR racing would use the 5.0 L 302 cid V8), and had an aero kit designed by Ford Australia designer Wayne Draper.^[13]

References

^ "Ford Falcon XF". Unique Cars and Parts. Retrieved 6 September 2009.
^ Robinson, Peter (7 October 2020). "The most influential men in the Ford Falcon's history". Wheels.
^ ^a ^b ^c "Falcon XF Technical Specifications". Unique Cars and Parts. Retrieved 6 September 2009.
^ ^a ^b ^c ^d "XF Falcon (1984 - 1988)". Falcon Facts. Archived from the original on 26 August 2014. Retrieved 11 May 2010.
^ Ford Fairmont and Fairmont Ghia sales brochure, Ford Australia, October 1984.
^ ^a ^b ^c McCarthy, Mike (November 1984). "Putting on a bold front: 1984 Ford Falcon launches". Wheels.
^ "The 'Last' V8". Australian Ford Register UK. Retrieved 24 December 2023.
^ Allen, Guy (January 2011). "1982 Ford XE Fairmont Ghia ESP 5.8 - V8 Falcons #4". .tradeuniquecars.com.au (319).
^ "Australian Design Rule 37 for Vehicle Emission Control" (PDF). Commonwealth of Australia. December 1985. Retrieved 13 January 2024.
^ New Ford Falcon Utes (flyer), Ford Australia, February 1988
^ Davis (1987), p. 186.
^ Kenwright, Joe (1 May 2005). "Day of the Clones PtII". CarPoint. Archived from the original on 3 March 2016. Retrieved 26 July 2009.
^ "Millenium Falcon". Archived from the original on 10 November 2013. Retrieved 10 November 2013.