The Flycatcher was designed to meet the requirements of Specification N6/22 for a carrier and floatplane fighter to replace the Gloster Nightjar, powered by either the Armstrong Siddeley Jaguar or the Bristol Jupiterradial engines. Both Fairey and Parnall submitted designs to meet this specification, with Fairey producing the Flycatcher, and Parnall the Parnall Plover.[1] The first of three prototype Flycatchers made its maiden flight on 28 November 1922, powered by a Jaguar II engine,[2] although it was later fitted with a Jupiter IV.[3] Small orders were placed for both the Flycatcher (for nine aircraft) and Plover (for ten aircraft) to allow service evaluation.[4] After trials, the Flycatcher was ordered for full production.
Technical description
The Flycatcher was a remarkable design for its time, and was one of the earliest aircraft specifically designed for operation from aircraft carriers.[5]Flaps ran the entire trailing edges of both wings. These could be lowered for landing and takeoff, providing the aircraft with the capability of using only 50 yd (46 m) of deck space "to come and go."
The fuselage was made of both wood and metal with fabric covering. A rather cumbersome undercarriage could be changed for twin floats or a wheel/float combination for amphibian use.
Hydraulic wheel brakes were added to assist the aircraft to stop in the confined space of an aircraft carrier. Arrestor hooks on the undercarriage spreader bar were a feature of early models, designed to engage the arrestor wires strung out on the carrier deck.
Operational history
Production of the Flycatcher began at Fairey's Hayes factory in 1923, entering service with No. 402 Flight Fleet Air Arm. The Flycatcher was flown from all British carriers of its era. Some 192 were produced. A typical deployment was on the aircraft carrier HMS Courageous, where 16 Flycatchers served alongside 16 Blackburn Ripons and 16 reconnaissance aircraft.
Very popular with pilots, the Flycatchers were easy to fly and very manoeuvrable. It was in these aircraft that the Fleet Air Arm developed the combat tactics used in the Second World War.
Prototype of planned replacement for Flycatcher I. Fundamentally a completely different aircraft from the Flycatcher I, the all-metal Flycatcher II was first flown on 4 October 1926 by Norman Macmillan, competing against the Gloster Gnatsnapper, Hawker Hoopoe, Armstrong Whitworth Starling and Vickers Type 123/141 to meet specification N.21/26. Specification later abandoned. No production.
No aircraft survives, but the Fleet Air Arm Museum holds a replica Flycatcher that was built in 1977. Registered as G-BEYB, it was flown until 1996, when it was put on static display. It is currently held in the museum's reserve collection, to which the public has only occasional access.[6]