PROFILPELAJAR.COM

Capacities of wine casks were formerly measured and standardised according to a specific system of English units. The various units were historically defined in terms of the wine gallon so varied according to the definition of the gallon until the adoption of the Queen Anne wine gallon in 1707. In the United Kingdom and its colonies the units were redefined with the introduction of the imperial system whilst the Queen Anne wine gallon was adopted as the standard US liquid gallon.

The major wine producing countries use barrels extensively and have developed standards at variance with the traditional English volumes that are commonly used in the wine and wine cooperage industries.^{[clarification needed]} Examples include a hogshead of 300 L (66 imp gal; 79 US gal), a barrique of 220 L (48 imp gal; 58 US gal) (Bordeaux), a barrel of 225 L (49 imp gal; 59 US gal) (Australia), a barrel of 230 L (51 imp gal; 61 US gal) (Burgundy) and a puncheon of 465 L (102 imp gal; 123 US gal)

Casks

Tun

The tun (Old English: tunne, Latin: tunellus, Middle Latin: tunna) is an English unit of liquid volume (not weight), used for measuring wine, oil or honey. It is typically a large vat or vessel, most often holding 252 wine gallons, but occasionally other sizes (e.g. 256, 240 and 208 gallons) were also used.^[1]

Pipe or butt

The butt (from the medieval French and Italian botte) or pipe was half a tun, or 105 imperial gallons (480 L). Tradition has it that George, Duke of Clarence, the brother of Edward IV of England, was drowned in a butt of malmsey on 18 February 1478.^[2]^[3] In Edgar Allan Poe's short story "The Cask of Amontillado", the narrator claims he has received "a pipe of what passes for Amontillado".^{[citation needed]} In Edward Bulwer-Lytton's novel "Paul Clifford", Lord Mauleverer states to Lawyer William Brandon "Because he sent me, in the handsomest manner possible, a pipe of that wonderful Madeira, which you know I consider the chief grace of my cellars, and he gave up a canal navigation bill, which would have enriched his whole county, when he knew that it would injure my property."^{[citation needed]}

Puncheon or tertian

The puncheon was a third of a tun. The term puncheon, shortened to pon in the United States, is thought to derive from the fact that it would have been marked by use of a punch to denote its contents.^{[citation needed]} The unit was also known as a tertian (from the Latin word for "third").^[1]

Hogshead

Of comparable size to the beer hogshead, the wine hogshead was equal to half a butt or a quarter of a tun.

Tierce

Closely related to the modern oil barrel, the tierce was half a puncheon, a third of a butt or a sixth of a tun.

Barrel

The wine barrel was half a wine hogshead or an eighth of a tun.

Rundlet

The rundlet was a seventh of a butt or a fourteenth of a tun.

History

Originally, the tun was defined as 256 wine gallons.^{[nb 1]} (This was the basis for calling 64 gallons a quarter.) At some time before the 15th century, it was reduced to 252 gallons, so as to be evenly divisible by other small integers, including seven.^{[nb 2]} Note that a 252-gallon tun of wine has a mass of approximately 2060 pounds,^[4] between a short ton (2000 pounds) and a long ton (2240 pounds).

The tun is approximately the volume of a cylinder with both diameter and height of 42 inches, as the gallon was originally a cylinder with diameter of 7 inches and height of 6.^{[nb 3]} The Queen Anne wine gallon of 231 cubic inches was adopted in 1707, and still serves as the definition of the US gallon. A US tun is thus the volume of a rectangular cuboid with dimensions 36 by 38.5 by 42 inches.

When the imperial system was introduced the tun was redefined in the UK and colonies as 210 imperial gallons. The imperial tun remained evenly divisible by small integers.^{[nb 4]} There was also little change in the actual value of the tun.^{[nb 5]}

measure	tuns	butts	puncheons	hogsheads	tierces	barrels	rundlets	litres^{[nb 6]}	gallons	litres^{[nb 7]}	gallons	litres^{[nb 8]}
	comparisons							historically	imperial definitions		US definitions
tun	1	1⁄2	1⁄3	1⁄4	1⁄6	1⁄8	1⁄14	950–960	210	954.68	252	953.92
butt	2	1	2⁄3	1⁄2	1⁄3	1⁄4	1⁄7	475–480	105	477.34	126	476.96
puncheon	3	1+1⁄2	1	3⁄4	1⁄2	3⁄8	3⁄14	316–320	70	318.23	84	317.97
hogshead	4	2	1+1⁄3	1	2⁄3	1⁄2	2⁄7	237–240	52+1⁄2	238.67	63	238.48
tierce	6	3	2	1+1⁄2	1	3⁄4	3⁄7	158–160	35	159.11	42	158.99
barrel	8	4	2+2⁄3	2	1+1⁄3	1	4⁄7	118–120	26+1⁄4	119.33	31+1⁄2	119.29
rundlet	14	7	4+2⁄3	3+1⁄2	2+1⁄3	1+3⁄4	1	68– 69	15	68.19	18	68.14

Notes

^ 256=2⁸
^ 252 = 2²×3²×7
^ The volume, V, of this cylinder may be approximated from the height, h, and the radius, r, as follows.

V = πr²h

≈ 22⁄7×(21 in)²×42 in since π ≈ 22⁄7

= (2²×3²×7)×(3×7×11) cu in

= 252×231 cu in
^ 210 = 2×3×5×7
^ The imperial tun is only about 0.0792% larger than the US tun assuming current definitions. Note that 5 imp gal ≈ 6 US gal.
^ The conversion to litres is approximate and given as a range to reflect the varying definitions of the gallon and the tun in terms of the gallon.
^ The conversion to litres shown in tooltips is exact assuming the current 4.54609-litre definition of the imperial gallon.
^ The conversion to litres shown in tooltips is exact assuming the current 25.4-millimetre definition of the international inch.