This article has multiple issues. Please help improve it or discuss these issues on the talk page. (Learn how and when to remove these messages) This article relies largely or entirely on a single source. Relevant discussion may be found on the talk page. Please help improve this article by introducing citations to additional sources. Find sources: "Double-deck elevator" – news · newspapers · books · scholar · JSTOR (June 2020) This article possibly contains original research. Please improve it by verifying the claims made and adding inline citations. Statements consisting only of original research should be removed. (June 2020) (Learn how and when to remove this message) (Learn how and when to remove this message)

A double-deck elevator or double-deck lift is an elevator where one cab is stacked on top of another. This allows passengers on two consecutive floors to be able to use the elevator simultaneously, significantly increasing the passenger capacity of an elevator shaft. Such a scheme can improve efficiency in buildings where the volume of traffic would normally have a single-deck elevator stopping at every floor. For example, a passenger may board the lower deck (which serves only odd-numbered floors) at basement level while another passenger may board the upper deck (which serves even-numbered floors) on the ground floor—the cab serving even floors is on top of the cab serving odd floors.

Double-deck elevators occupy less building core space than traditional single-deck elevators do for the same level of traffic. In skyscrapers, this allows for much more efficient use of space as the floor area required by elevators is significant.

The other main technique for reducing the floor area occupied by elevators is shared-shaft elevators where multiple elevators use different sections of the same shaft to serve different floors with skylobbies separating the sections. The ThyssenKrupp TWIN elevator places two independent elevator cabs in one shaft and the ThyssenKrupp MULTI system places several elevator cabs in one shaft—each cab is equipped with its own, independent linear motor and can move vertically but also horizontally from one shaft to another.^[1][2]

Not all double-deck elevators are used to transport passengers simultaneously in both decks. The second deck in a double-deck car may be used for the transportation of goods, typically outside of peak traffic periods. This technique has the advantages of preventing damage to interior fixtures due to impact from trolleys and not requiring a shaft dedicated to a goods-only elevator car. During peak periods, the elevator is used in passenger-only mode.

As of 2011, no triple-deck elevators have been built, although such a design had been considered for the 163-floor Burj Khalifa before the final design was scaled back to double-deck.^[3]

• How do they work?
• Skytrak