Constructions Mécaniques de Normandie (CMN) is a French shipyard located at Cherbourg. It employs approximately four hundred employees covering the various specialities required for the construction of luxury yachts and warships.[1]
Since its foundation in 1945, the shipyard has delivered over 350 vessels. It is part of the holding company, Abu Dhabi MAR, which is steered by the Emirate of Abu Dhabi.[2]
In the 1960s, the shipyard specialized in building vessels with the CMN patented "glued laminated wood technique", especially the minesweepers for the French and German navies.[3] One of its major minesweeper series was the well-known Circé-classminehunters (the first one was launched on 15 December 1970, the following four between 1971 and 1972). The glued laminated technique was the best answer to the ship qualities in terms of non-magnetism, noise absorption or noise reflecting.
From 1967, Amiot diversified CMN's offerings with fast attack crafts with a wood-cored laminated hull. The incident that marked the beginning of a new class of fast attack craft in shipbuilding - La Combattante II, was the sinking of the Israeli destroyerINS Eilat on 21 October 1967 by two Egyptian Komar-class missile boats, as the destroyer sailed in international waters off Port Said.[4]
In 1962, Lürssen of Germany signed an agreement to supply Israel with twelve of the Jaguar-class fast attack craft vessels.[5] After the delivery of three of the twelve missile boats in 1964, Germany had to renounce the agreement owing to political pressures from Arab nations. The Germans, however, agreed that the boats could be constructed elsewhere and CMN was chosen to construct the remaining nine, which would be of La Combattante II class (Sa'ar-1-class Israeli Navy designate) fast attack crafts.[6]
During the 1970s, the Bundesmarine (German Federal Navy), ordered 20 La Combattante II fast attack crafts. The Tiger-class fast attack craft is a modification of the French La Combattante II design.
CMN has around 400 employees and is part of the holding company, Abu Dhabi MAR, which is steered by the Emirate of Abu Dhabi. Its sister companies are ADMShipyards, Nobiskrug Shipyard, ADM Kiel (Civilian Shipbuilding assets of HDW) & Hellenic Shipyards SA.
CMN is able to build or refit vessels up to 70 m (230 ft). The construction is done entirely under sheltered halls (48,000 m2, 520,000 sq ft of covered facilities), on a total surface of 110,000 m2 (1,200,000 sq ft). The site has significantly sized building sheds, one of 161 m × 22 m (528 ft × 72 ft), and another of 80 m × 22 m (262 ft × 72 ft).[1]
The vessels are launched by:
a slipway for yachts under 700 tons
a 3,000-tonne Syncrolift (lift area of 32 m × 90 m, 105 ft × 295 ft})
Before becoming a part of Abu Dhabi Mar group holding in 2007, Iskandar Safa was the sole owner of CMN.