PROFILPELAJAR.COM

Chicago Subdivision
Chicago Subdivision
	Amtrak's Carl Sandburg on the Chicago Subdivision in Berwyn, Illinois. The bridge above the train belongs to the Canadian National Railway (previously Illinois Central).
Overview
Owner	BNSF Railway
Locale	Chicago metropolitan area
Termini	Chicago; Aurora, Illinois;
Service
Type	Freight rail; Commuter rail; Inter-city rail
System	Northern Transcon
Operator(s)	BNSF Railway; Metra; Amtrak
Technical
Line length	38 mi (61 km)
Number of tracks	3-4
Track gauge	1,435 mm (4 ft 8+1⁄2 in) standard gauge
Operating speed	70 mph (110 km/h)
Route map
Route map
	v; t; e; Legend
Chicago Subdivision
	Aurora
	original station
	Aurora
	Transportation Center
	Elgin, Joliet & Eastern
	/ Canadian National
	Illinois Central /
	CN Freeport Subdivision
	CR&I Industrial Track
	/ Norfolk Southern
	St. Charles Air Line
	to Chicago Subdivision

The Chicago Subdivision or Chicago Sub is a railroad line in Illinois that runs about 38 miles (61 km) from Chicago to Aurora and hosts Metra's BNSF Railway Line commuter service. It is operated by BNSF Railway as the easternmost part of the railroad's Northern Transcon to Seattle, Washington.^[1]^[2]^[3]^[4] This line is colloquially known as The Racetrack because it is mostly triple-tracked and supports fairly fast trains. It had been operated by a BNSF ancestor, the Chicago, Burlington and Quincy Railroad, which introduced high-speed Zephyr passenger trains in 1934 and ran many of them along this subdivision from Chicago to points west.

The Chicago Subdivision meets the Aurora Subdivision and Mendota Subdivision in Aurora. Commuter service ends at the Aurora Transportation Center, though Amtrak trains continue southwest on the Mendota Subdivision. Triple-tracking runs from where track leading to the Aurora station and Metra Yard joins the subdivision eastward to Cicero, where multiple tracks from a yard join. It is then quadruple-tracked for the rest of the way until the turn to Union Station.^[5] As of 2015^[update] weekday traffic on the subdivision was 94 Metra commuter trains, eight Amtrak intercity trains, and 60 BNSF freight trains.^[6]

After the introduction of the CB&Q Zephyrs, train speeds increased significantly around the country for the next decade or so, but the Naperville train disaster along these tracks in 1946 was one event that contributed to the federal government restricting speeds in later years. Trains that had once traveled at or above 100 miles per hour (160 km/h) were soon restricted to a maximum of 79 miles per hour (127 km/h).^[7]^[8]^[9] Much of this line has a speed limit of 70 miles per hour (110 km/h) for passenger trains, while freight trains run slower.^[1]^[2]^[3]^[4]

Passenger Services

References

^ ^a ^b Don Winter. "Eola to Aurora". Retrieved June 4, 2010.
^ ^a ^b Don Winter. "La Grange to Eola (ex-CB&Q)". Retrieved June 5, 2010.
^ ^a ^b Don Winter. "Cicero to La Grange (ex-CB&Q)". Retrieved June 5, 2010.
^ ^a ^b Don Winter. "Western Avenue to Cicero (ex-CB&Q)". Retrieved June 5, 2010.
^ Bill Vandervoort. "Railfan tips/operating detail". Chicago Transit & Railfan. Retrieved June 4, 2010.
^ Blaszak, Michael W. (March 2015). "Metra mojo". Trains. 75 (3): 53.
^ William Wendt (July 30, 2007). "Hiawatha dieselization". Yahoo Groups. Archived from the original on July 9, 2012. Retrieved June 5, 2010.
^ John Gruber and Brian Solomon (2006). The Milwaukee Road's Hiawathas. Voyageur Press. ISBN 978-0-7603-2395-3.
^ "Ask Trains from November 2008". Trains Magazine. December 23, 2008. Archived from the original on June 24, 2010. Retrieved June 5, 2010.