Bonneville Dam

Bonneville Locks and Dam
Spillway structure
LocationColumbia River Gorge National Scenic Area, Multnomah County, Oregon / Skamania County, Washington, United States
Coordinates45°38′39″N 121°56′26″W / 45.64417°N 121.94056°W / 45.64417; -121.94056
Construction began1934 (First Powerhouse)
1974 (Second Powerhouse)
Opening date1937 (First Powerhouse)
1981 (Second Powerhouse)
Construction cost$88.4 million (First Powerhouse, Spillway, Lock and Fish structures)
$664 million (Second Powerhouse)
Owner(s)US Army Corps of Engineers (Operator)
Bonneville Power Administration (Marketer)
Dam and spillways
Type of damConcrete gravity, run-of-the-river
ImpoundsColumbia River
Height171 ft (52 m)[1]
Length2,690 ft (820 m)
Width (base)132 ft (40 m) (Spillway)
Spillway typeService, gate-controlled
Reservoir
CreatesLake Bonneville
Total capacity537,000 acre⋅ft (0.662 km3)
Catchment area240,000 sq mi (620,000 km2)
Power Station
Turbines20 and unit 0
Installed capacity1242 MW[2]
Annual generation4,466 GWh (2009)[3]
Bonneville Dam Historic District
LocationBonneville, Oregon
Built1934–1943
ArchitectClaussen and Claussen
Architectural styleColonial Revival
NRHP reference No.86000727 (original)
86003598 (increase)
Significant dates
Added to NRHPApril 9, 1986
Boundary increaseMarch 26, 1987[4]
Designated NHLDJune 30, 1987[5]

Bonneville Lock and Dam /ˈbɒnəvɪl/ consists of several run-of-the-river dam structures that together complete a span of the Columbia River between the U.S. states of Oregon and Washington at River Mile 146.1.[6] The dam is located 40 miles (64 km) east of Portland, Oregon, in the Columbia River Gorge. The primary functions of Bonneville Lock and Dam are electrical power generation and river navigation. The dam was built and is managed by the United States Army Corps of Engineers. At the time of its construction in the 1930s it was the largest water impoundment project of its type in the nation, able to withstand flooding on an unprecedented scale.[7] Electrical power generated at Bonneville is distributed by the Bonneville Power Administration. Bonneville Dam is named for Army Capt. Benjamin Bonneville, an early explorer credited with charting much of the Oregon Trail. The Bonneville Dam Historic District was designated a National Historic Landmark District in 1987.[5]

History

Bonneville Lock & Dam, 1937
Bonneville Dam, 1938
Bonneville Lock, 1938

In 1896, prior to this damming of the river, the Cascade Locks and Canal were constructed, allowing ships to pass the Cascades Rapids, located several miles upstream of Bonneville.

Prior to the New Deal, development of the Columbia River to provide flood control, hydroelectricity, navigation, and irrigation was deemed to be important. In 1929, the US Army Corps of Engineers published the Columbia River 308 Report that recommended ten dams on the river, but no action was taken until the Franklin D. Roosevelt administration and the New Deal. During this period, America was in the Great Depression, and the dam's construction provided jobs and other economic benefits to the Pacific Northwest. Inexpensive hydroelectricity gave rise to a strong aluminum industry in the area (which has totally shut down since then).[8] With funding from the Public Works Administration in 1934, two of the larger projects were started, the Grand Coulee Dam and the Bonneville Dam. Working in non-stop eight-hour shifts, 3,000 laborers from the relief or welfare rolls were paid 50 cents an hour for the work on the dam and raising local roads for the reservoir.[9]

To create the Bonneville Locks and Dam, the Army Corps of Engineers first built one of the largest scale models in history of the proposed dam, the section of river on which it was to be located, and its various components to aid in the study of the construction.[10] First a new lock and a powerhouse were constructed on the south (Oregon) side of Bradford Island, and a spillway on the north (Washington) side. Cofferdams were built to block half of the river and clear a construction site where the foundation could be reached. These projects, part of the Bonneville Dam, were completed in 1937.[11]

Both the cascades and the old lock structure were submerged by the Bonneville Reservoir, also known as Lake Bonneville, the reservoir that formed behind the dam. The original navigation lock at Bonneville opened in 1938 and was, at that time, the highest single-lift lock in the world, with a vertical lift of 60 feet.[12] Although the dam began to produce hydroelectricity in 1937, commercial electricity began its transfer from the dam in 1938.[9]

A second powerhouse and dam structure were started in 1974 and completed in 1981. The second powerhouse was built by widening the river channel on the Washington side, creating Cascades Island between the new powerhouse and the original spillway. The combined rated capacity electrical output of the two power houses at Bonneville is now 1.2 gigawatts.

Despite its world record size in 1938, Bonneville Lock became the smallest of eight locks, including seven built subsequently at different locations upstream on the Columbia and Snake rivers. Eventually a new lock was needed at Bonneville; this new structure was built on the Oregon shore, opening to ship and barge traffic in 1993. The old lock is still present, but it is no longer used.

The largest fish hatchery in Oregon, called Bonneville Fish Hatchery, is located next to Bonneville Dam. It is a tourist destination that is often connected to Bonneville Dam tourism.

Dimensions and statistics

  • Owner: U.S. Army Corps of Engineers, Portland District[2]
  • Location: On Columbia River about 40 miles upstream from Portland, Oregon[2]
  • First Powerhouse – Constructed in 1933–37; Dam 313 m (1,027 ft) long x 77 feet (23 m) high forebay; 10 generators with a nominal total output capacity of 526.7 MW; Overload capacity 577 MW.[2]
  • Spillway – Constructed 1933–37; 18 gates over a length of 442 m (1,450 ft); maintains the reservoir (upriver) usually 18 m (59 ft) above the river on the downstream side;[2]
  • Second Powerhouse – Constructed 1974–82; Dam 300.5 m (986 ft) long x 77 feet (23 m) high forebay; 8 generators (plus two at fish ladders) with a nominal total generating capacity of 558.2 MW; Overload capacity 612 MW.[2]
  • Bonneville Lock – Constructed from 1987 to 1993 at a cost of $341 million; 26 m (85 ft) wide, 206 m (676 ft) long; transit time is approx. 30 minutes. Replaced earlier smaller lock built 1938.[2]
  • Lake Bonneville – 77 km (48 mi) long reservoir on the Columbia River created by Bonneville Dam; part of the Columbia-Snake Inland Waterway.[2]

It was declared a National Historic Landmark in 1987.[5][7]

  • both powerhouses - output capacity: 1.2 GW

Environmental and social implications

The Bonneville Dam blocked the migration of white sturgeon to their upstream spawning areas. Sturgeon still spawn in the area below the dam, and the lower Columbia River supports a healthy sturgeon population. Small, very depressed populations of white sturgeon persist in the various reservoirs upstream.

The dam features fish ladders to help native salmon and steelhead get past the dam on their journey upstream to spawn.[13] The large concentrations of fish swimming upstream serve as a tourist attraction during the spawning season. California sea lions are also attracted to the large number of fish, and are often seen around the base of the dam during the spawning season.[14] By 2006, the growing number of sea lions and their impact on the salmon population had become worrisome to the Army Corps of Engineers and environmentalists.[15][16] Historically, pinnipeds such as sea lions and seals have hunted salmon in the Columbia River as far as The Dalles and Celilo Falls, 60 miles (97 km) farther upstream from Bonneville, as remarked upon by people such as George Simpson in 1841.[17]

Electricity controversy

Creating electricity was a sensitive issue at the time of the Bonneville Dam's construction, which was funded with federal dollars. The Franklin D. Roosevelt administration wanted the electricity produced to be a public source of power and prevent energy monopolies. Advocates for private sale of the electricity were opposed to this, and they did not want the government to interfere. In 1937, the Bonneville Project Act was signed by Roosevelt, giving the dam's power over to the public and creating the Bonneville Power Administration (BPA). A rate of $17.50 per kilowatt-year (about 0.2 cents/kWh) was maintained by the BPA for the next 28 years.[9]

Power production is the primary function of the Bonneville Dam. The two Bonneville powerhouses generate about 5 billion kWh of electricity each year. The Bonneville Dam supplies nearly 500,000 homes with electricity, assuming each household consumes 10,000 kWh of electricity per year. In 1998, its generation costs were about 1.2 cents/kWh, which was much higher than historic costs mainly because the Bonneville Power Administration (BPA) was still paying off the second powerhouse which was built in 1982. Consumers were charged 2.3 cents/kWh to account for transmission and other costs.[18]

See also

References

  1. ^ "Bonneville Dam and Lake Bonneville".
  2. ^ a b c d e f g h "Bonneville Dam Brochure" (PDF). US Army Corps of Engineers. Archived from the original (PDF) on March 31, 2016. Retrieved March 19, 2016.
  3. ^ "Bonneville". Carbon Monitoring for Action (CARMA). Retrieved August 13, 2016.
  4. ^ "National Register Information System". National Register of Historic Places. National Park Service. January 23, 2007.
  5. ^ a b c "Bonneville Dam Historic District". National Historic Landmark summary listing. National Park Service. Archived from the original on January 6, 2008. Retrieved November 18, 2007.
  6. ^ "The Columbia River System Inside Story" (PDF). BPA.gov. pp. 14–15. Archived from the original (PDF) on May 27, 2010. Retrieved July 17, 2010.
  7. ^ a b Stephen Dow Beckham and Donald C. Jackson (n.d.). "National Register of Historic Places Inventory-Nomination: Bonneville Dam Historic District / Bonneville Project" (PDF). National Park Service. Retrieved June 22, 2009. and Accompanying 2 photos, from 1982 and undated. (469 KB)
  8. ^ "Aluminum". www.nwcouncil.org. Retrieved August 13, 2021.
  9. ^ a b c "Bonneville Dam". Online Highways LLC. 2005. Retrieved August 13, 2016.
  10. ^ "Model of Bonneville Dam Aids in Study of River". Popular Mechanics (April ed.). 1935. p. 539. Retrieved November 21, 2021.
  11. ^ "Workers at Bonneville Dam". Archived from the original on August 2, 2015.
  12. ^ US Army Corps of Engineers (April 1989). "Bonneville Project – HAER No. OR-11" (PDF). Historic American Engineering Record via Library of Congress. p. 23. Having a vertical lift of 60 feet made the Bonneville lock the highest single-lift lock built to that time.
  13. ^ "Elevators for Fish to Save Salmon Canning Industry". Popular Science Monthly (March 1935). March 1935.
  14. ^ "Why local sea lions could face a death warrant". Ventura County Star. May 3, 2019. Retrieved May 4, 2019.
  15. ^ Frazier, Joseph B. (March 31, 2006). "Crafty Sea Lion Befuddles Fish Biologists". Associated Press. Archived from the original on April 14, 2006.
  16. ^ "Pinniped Deterrents at Bonneville Dam 2005–2006 – Slide 1" (PDF). USACE. Archived from the original (PDF) on April 12, 2013.
  17. ^ Mackie, Richard Somerset (1997). Trading Beyond the Mountains: The British Fur Trade on the Pacific 1793–1843. Vancouver: University of British Columbia (UBC) Press. pp. 191–192. ISBN 0-7748-0613-3. online at Google Books
  18. ^ "The Economic Costs and Benefits of the Bonneville Dam". 1998-99 Class project, ENVS61 – Kenyon College. March 26, 2002.
  • Bonneville Lock and Dam. A National Historic Landmark Serving the Northwest. 2001. U.S. Government Printing Office, 2001-691-677. U.S. Army Corps of Engineers, Portland District, public information pamphlet distributed at the Bonneville Lock and Dam visitor centers.
  • "Bonneville Lock and Dam: A Gift from the People of the Great Depression." Barry, Joseph Patrick, published by Retired Ranger and Associates, 296 pages, October, 2017