PROFILPELAJAR.COM

Aluminium bronze is a type of bronze in which aluminium is the main alloying metal added to copper, in contrast to standard bronze (copper and tin) or brass (copper and zinc). A variety of aluminium bronzes of differing compositions have found industrial use, with most ranging from 5% to 11% aluminium by weight, the remaining mass being copper; other alloying agents such as iron, nickel, manganese, and silicon are also sometimes added to aluminium bronzes.

Compositions

Aluminium bronze with 20% aluminium at 500× magnification

The following table lists the most common standard aluminium bronze wrought alloy compositions, by ISO 428 designations. The percentages show the proportional composition of the alloy by weight. Copper is the remainder by weight and is not listed:

Alloy	Aluminium	Iron	Nickel	Manganese	Zinc	Arsenic
CuAl5	4.0–6.5%	0.5% max.	0.8% max.	0.5% max.	0.5% max.	0.4% max.
CuAl8	7.0–9.0%	0.5% max.	0.8% max.	0.5% max.	0.5% max.
CuAl8Fe3	6.5–8.5%	1.5–3.5%	1.0% max.	0.8% max.	0.5% max.
CuAl9Mn2	8.0–10.0%	1.5% max.	0.8% max.	1.5–3.0%	0.5% max.
CuAl10Fe3	8.5–11.0%	2.0–4.0%	1.0% max.	2.0% max.	0.5% max.
CuAl10Fe5Ni5	8.5–11.5%	2.0–6.0%	4.0–6.0%	2.0% max.	0.5% max.

Material properties

Aluminium bronzes are most valued for their higher strength and corrosion resistance as compared to other bronze alloys. These alloys are tarnish-resistant and show low rates of corrosion in atmospheric conditions, low oxidation rates at high temperatures, and low reactivity with sulfurous compounds and other exhaust products of combustion. They are also resistant to corrosion in sea water. Aluminium bronzes' resistance to corrosion results from the aluminium in the alloys, which reacts with atmospheric oxygen to form a thin, tough surface layer of alumina (aluminium oxide) which acts as a barrier to corrosion of the copper-rich alloy. The addition of tin can improve corrosion resistance.^[1]

Another notable property of aluminium bronzes are their biostatic effects. The copper component of the alloy prevents colonization by marine organisms including algae, lichens, barnacles, and mussels, and therefore can be preferable to stainless steel or other non-cupric alloys in applications where such colonization would be unwanted.

Aluminium bronzes tend to have a golden color.

Applications

Aluminium bronzes are most commonly used in applications where their resistance to corrosion makes them preferable to other engineering materials. These applications include plain bearings and landing gear components on aircraft, guitar strings, valve components, engine components (especially for seagoing ships), underwater fastenings in naval architecture, and ship propellers.^[2] Aluminium bronze is also used to fulfil the ATEX directive for Zones 1, 2, 21, and 22. The attractive gold-toned coloration of aluminium bronzes has also led to their use in jewellery.

Aluminium bronzes are in the highest demand from the following industries and areas:

General sea water-related service
Water supply
Oil and petrochemical industries (i.e. tools for use in non-sparking environments)
Specialised anti-corrosive applications
Certain structural retrofit building applications

Aluminium bronze can be welded using the MIG welding technique with an aluminium bronze core and pure argon gas.

Aluminium bronze is used to replace gold for the casting of dental crowns. The alloys used are chemically inert and have the appearance of gold.

The Doehler Die Casting Co. of Toledo, Ohio were known for the production of Brastil, a high tensile corrosion resistant bronze alloy.^[3]^[4]

Italy pioneered the use for coinage of an aluminium-bronze alloy called bronzital (literally "Italian bronze") in its 5- and 10-centesimi from 1939. Its alloy was finalized in 1967 to 92% copper, 6% aluminium, and 2% nickel,^[5] and was since used in the 20, 200 and 500 Italian Lira coins until 2001. Bronzital has since been used for the Australian and New Zealand 1- and 2-dollar coins, the pre-2009 Mexican 20- and 50-centavo coins, the inner cores of the bi-metallic Mexican 1-, 2- and 5-peso coins, the pre-2017 Philippine 10-peso coin, the Canadian 2 dollar coin (a.k.a. the 'toonie'), and the outer rings of the Mexican 10-, 20-, 50- and 100-peso coins.

Nordic Gold, composed of 89% copper, 5% aluminium, 5% zinc, and 1% tin, is a more recently developed aluminium-bronze alloy for coinage. It was first used for the Swedish 10-kronor coin in 1991, and became widespread after the introduction of Nordic gold 10, 20 and 50-cent Euro coins in 2002.

Aluminium bronze is used in marine applications due to its excellent corrosion resistance in seawater.^[6]^[7] It is found in marine hardware like propellers, pumps, and valves, as well as in shipbuilding components and hull fittings.^[8] For its non-magnetic properties, it is also used in naval vessels, particularly in sonar equipment.^[9]

References

^ "Emerald | Anti-Corrosion Methods and Materials | Effect of tin addition on the corrosion resistance of aluminium bronze". Archived from the original on 2014-02-02. Retrieved 2011-01-11.
^ "Typical Alloys Used - Accurate Specialties Inc". Accurate Specialties Inc. Retrieved 2018-08-28.
^ "Doehler-Jarvis Company Collection, MSS-202".
^ Woldman’s Engineering Alloys, 9th Edition 1936, American Society for Metals, ISBN 978-0-87170-691-1
^ "20 Lire, Italy". en.numista.com.
^ Trento, Chin (Apr 12, 2024). "How Bronze is Used Today". Stanford Advanced Materials. Retrieved Oct 27, 2024.
^ "Bronze: Characteristics, Uses And Problems". U.S. General Services Administration. May 8, 2016. Retrieved Oct 27, 2024.
^ Yokota, Motohiro; Mochizuki, Hiromi (2024). "Anti-Corrosion Effects of Aluminum Bronze Film Coatings and Cathodic Disbondment Resistance of Coating Films". Marine Engineering. 59 (2): 234–240. doi:10.5988/jime.59.234.
^ Snook, K.A.; Rehrig, P.W. (2005). "Advanced piezoelectric single crystal based transducers for naval sonar applications". IEEE Ultrasonics Symposium, 2005. Vol. 2. pp. 1065–1068. doi:10.1109/ULTSYM.2005.1603034. ISBN 0-7803-9382-1.